Used Washing Machine Of Part Of for sale (92,075)

Condition: used, TECHNICAL DETAILS - Media : A3 type - Installed power : 8 [kW] - Media volume : 80 liters Pjdpeug U Skjfx Aahsrc - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) :1200 x 1800 x 1500 [mm] EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008

Year of construction: 2011, condition: used, functionality: fully functional, Suitable for FISCHER & KRECKE aniloxes with GPS handle Max roll length: 1400mm Max roll diameter: 160mm Max roll weight: 35kg Max. cleaning length: 1600mm Liquid tank: 55L Anilox washing machine The machine operates on the following principle: Washing: The anilox is rotated while heated cleaning liquid is sprayed onto its surface for 5 to 15min. The liquid loosens ink particles from the cells and cylinder surface. Liquid recovery Psdpfevdrw Dex Aahsrc At the end of the wash cycle, the cylinder continues to rotate and the cleaning liquid is recovered and returned to the tank before being filtered and reused. Duration: 2 to 3 min. Rinsing: To remove loose ink particles, the cylinder is rinsed with high-pressure hot water. Nozzles are installed on a rail and slide to rinse the entire surface of the cylinder. Duration: 1 to 2 min. Drying The cylinder rotates while nozzles blow air over it. The drying nozzles are also mounted on a rail and slide to dry the entire surface of the cylinder. Duration: 1 to 2 min (depending on cylinder length)

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Podsq Ih Nyepfx Aahjrc Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Available immediately

Year of construction: 2002, condition: ready for operation (used), Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible. Pjdswg E Aqopfx Aahorc

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total width: 1,600 mm, working width: 1,600 mm, workpiece height (max.): 26 mm, product length (min.): 350 mm, product width (min.): 180 mm, TECHNICAL DETAILS Workpiece Working width: 1,600 mm Glass thickness: 2 mm - 26 mm Minimum glass size: 350 mm x 180 mm Pre-spraying: 1,200 mm MACHINE DETAILS Prjdjw Slalepfx Aahjc Total width: 1,600 mm EQUIPMENT 3 washing units, each with a pair of cylindrical brushes Recycling tank with heating Tank discharge on the left side

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 5430, System for efficient cleaning of components with water-based cleaning media Working area: 900 x 2100 mm Machine used, some sheets have rusted. Sale without warranty Prjdpfowqpnrox Aahsc PERO ROBOMAT systems are designed for cleaning a variety of parts – whether lightly oiled or heavily soiled. In the universal working area of the robust ROBOMAT system, workpieces and parts with very different geometries are positioned and reliably cleaned using powerful spray cleaning. The PERO ROBOMAT is also available as a model with two baths for surface cleaning before painting and final assembly.

Condition: used, TECHNICAL DETAILS - Supply voltage : 1*230 [VAC] Prjdpfx Ajug U Sqjahoc - Rated current : 1.5 [A] - Power : 140/560 [W] - Frequency : 35 [KHz] - Max. temperature : 80 [°C] - Internal dimensions : 230*130*100 [mm] - Dimensions : 260*160*330 [mm] - Weight : 4 [Kg]

Year of construction: 2015, condition: used, functionality: fully functional, Suitable for BOBST aniloxes with GPS handle Max roll length: 1400mm Max roll diameter: 200mm Psdpfovdrzcox Aaherc Max roll weight: 35kg Max. cleaning length: 1600mm Liquid tank: 55L Anilox washing machine The machine operates on the following principle: Washing: The anilox is rotated while heated cleaning liquid is sprayed onto its surface for 5 to 15min. The liquid loosens ink particles from the cells and cylinder surface. Liquid recovery At the end of the wash cycle, the cylinder continues to rotate and the cleaning liquid is recovered and returned to the tank before being filtered and reused. Duration: 2 to 3 min. Rinsing: To remove loose ink particles, the cylinder is rinsed with high-pressure hot water. Nozzles are installed on a rail and slide to rinse the entire surface of the cylinder. Duration: 1 to 2 min. Drying The cylinder rotates while nozzles blow air over it. The drying nozzles are also mounted on a rail and slide to dry the entire surface of the cylinder. Duration: 1 to 2 min (depending on cylinder length)

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! Pjdpsqc Udiefx Aahorc 8 brushes, Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Year of construction: 2019, condition: ready for operation (used), A belt washing machine is available for pre-washing and feeding food into downstream machines. Input height: 1000mm, output height: 1000mm, machine dimensions X/Y/Z: approx. 4600mm/1500mm/1500mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Podpju Tiyvofx Aahsrc

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time. Podpfx Aonl Ekroahjrc

Condition: excellent (used), Year of construction: 2024, operating hours: 3,855 h, functionality: fully functional, machine/vehicle number: 1200F001894YW, Loading weight: 115–128 kg Drum volume: 1154 l Filling ratio: 1:10 – 1:9 Spin speed: 695 rpm G-factor: 350 Standard features: Psdpfx Aaow Nw Euehorc - Direct steam heating - Freestanding, high-speed - Machine housing made of chrome-nickel steel (AIS 304) - Inner and outer drum made of chrome-nickel steel - Perforated inner ribs / PowerWash - Higher mechanical action - Low water consumption - Intuitive touch control XCONTROL FLEX PLUS

Condition: used, TECHNICAL DETAILS - internal dimensions : 640 x 600 x 640 [mm] - external dimensions : 1200 x 1800 x 900 [mm] - power supply : 3 X 400 V 50 Hz 36A Pjdpsug U Swsfx Aaherc - power : 22.5 [kW]

Condition: used, Year of construction: 2007, functionality: fully functional, Cliché washing machine for sale Process steps: cleaning, rinse and dry The plate is automatically drawn into the processor by the dragging rolls Transport speed and temperature controlled by the computer Equipped with two brushes with alternative and floating movement Gas aspiration inside the tank via two blowers Possibility to connect the unit directly to your exhaust systems Podpfx Aevyh Auoahorc Temperature inside the solvent drum via the heater Max plate width 920 mm Min plate length 220 mm (with sticky plate any size) Drum recycle solvent capacity 35 Power 1,5 Kw Electrical 230V MONO 50/60HZ Dimensions 1830 x 1440 x 1060 mm

Condition: good (used), Year of construction: 2003, Washing height 1250 / Open top, 4 brushes / water tank, pumps, Podpfx Aaot Ah Npsherc 7.5kW / blower cabinet for drying zone, Running direction: right to left, Total length: 6450 mm, Height: 2100 mm, Depth of washing machine: 1300 mm, Width: 1700 mm, Dimensions for blower cabinet: Height: 1100 mm, Length: 700 mm, Width: 700 mm

Year of construction: 2018, condition: excellent (used), I sell the washing machine for sanding bands for widebelt sanding machines NETEK Denmark. Working width up to 1350mm. For longer lifetime of sanding bands. Predpfxow Ancxs Aahoc Available immediately.

Condition: new, Year of construction: 2022, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, overall weight: 1,100 kg, pressure: 600 bar, Sugino pump Sugino high pressure pump type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Flow rate 43 L/min Predpfx Ajqd Rtysahjc Weight 1100kg High-Pressure Pump

Year of construction: 2025, condition: new, RC1100G5 FREE SHIPPING TO EUROPE Product from Serbia 100%. 1. Platform diameter: 1100mm 2. Maximum height : 650mm (from platform to nozzles) 3. Maximum load : 350kg 4. Pumps : 2 pumps, each to 2,2kW 400L/min 3,7 bar. stainless steel AISI304 5. Special shape of laser-made nozzles (The best ratio of pressure and width of the jet) 5. Platform drive : Step SERVO MOTOR with with collision detection 6.Heaters : 2x(2x3kW) = 12kW stainless steel AISI304 7. Cover sensor: YES 8. Liquid sensors : YES 9. Platform overload detection : YES 10. Oil skimmer : YES 11. Digital control unit with color screen, 3D notifications, time regulator (up to 80 min.) and temperature regulator (up to 80C) 12. Transport box : Safety wooden packing. WARRANTY 24 months ----- Prjdpfx Aaegd Ucgohjc We also offer smaller machines from this series with a platform diameter of 700mm and 900 mm ----- 35 YEARS OF EXPERIENCE IN THE PRODUCTION OF AUTOSERVICE WASHING EQUIPMENT

Condition: used, TECHNICAL DETAILS - product : hydrocarbon class A3 WASHING CYCLE : - automatic basket load - washing tank filling - automatic basket rotation - exposure to ultrasounds - washing tank draining - rinse under vacuum in vapor phase with adjustable time - drying under vacuum with adjustable time - regeneration through distillation under vacuum WORKING CHAMBER - diameter : 530 [mm] - depth : 600 [mm] Predpfx Ajug U Sdsahec TANK - dimensions : 800 x 1100 x 300 [mm] - volume : 160 [L] - supply : 3x 400 [V] EQUIPMENT - management automaton B2008 - automatic loading with LAUER PCS 095 Plus automaton - 5 stainless steel baskets : 445 x 300 x 200 [mm] - cooling unit MTA

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for packing press 180P2 capacity up to 2 000 kg/h Prsdpfx Aaob Nccbshjc power: elevator 2,2 kW mill 4 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,400 mm insertion resp. discharge height 800 mm weight 290 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 460 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen

Condition: good (used), Year of construction: 1993, EL. connected load: 44.2 kW Prsdpswx H Tbsfx Aahsc 6 washing brushes/good condition Working direction: right/left Washing height: 2500 mm Inlet to washing machine l=3200 mm Outlet to washing machine l=1100 mm

Condition: used, TECHNICAL DETAILS - Media : A3 type - Installed power : 8 [kW] - Media volume : 80 liters - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) : 1200 x 1800 x 1500 [mm] Prjdoug U R Hopfx Aahec EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008

Condition: good (used), Year of construction: 2007, Washing height: 1600 mm. Glass thickness: 1 - 4 mm. 4 washing brushes. Open at the top. Connected loads: 3 x 400 V / 50 Hz, 9.2 kW. Total length: 7880 mm. Prodpfx Aevi Nfvsahjc Depth: 1100 mm. Max. Height: 2300 mm. Fan: Length: 1000 mm, Width: 1000 mm, Height: 1600 mm.

Condition: used, TECHNICAL DETAILS Prsdpfoug U R Tsx Aahjc - Loading dimensions : * width : 1500 [mm] * depth x height : 850 x 400 / 700 x 550 /400 x 650 [mm] - Loading weight : 1000 [Kg] - Washing bath * volume : 600 [l] * heating power : 18 [kw] - Rinsing bath * volume : 650 [l] * heating power : 18 [kw] - Sprinkling power (3 bars) : 950 [l/min] - Electric power : 43 [kw] - Noise : < 80 [DbA] - Machine dimensions (L x l x H) : 4450 x 1800x 2540 [mm] - Machine weight : 1300 [Kg] EQUIPMENT - Oil separator - Fine filtration - Manual loading

Condition: used, TECHNICAL DETAILS - Inside dimensions : 500 x 400 x 500 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1000 x 700 [mm] - Machine height : 1500 [mm] Pjdpfjuk Nv Tsx Aahjrc - Machine weight : 165 [kg]