Used Waste Removel for sale (3,596)

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW Tsdpfx Acsx Alh Ae Nsf

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor, with reduced knife protrusion, suitable for both hard and soft materials + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Sample image above: color of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta starter - Fast hydraulic system - Automatic shutdown in rotor idle mode - Speed: 70–90 rpm for high throughput - Cycle control to minimize idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Tedpfx Ajx Af Rdjc Nef The following options are available at extra cost: *Visible in the last 2 images. - Additional blade row + €2,790 - Segmented bottom + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation) - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Synchronous start-stop with shredder) - Enlarged feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.

Condition: used, maximum load weight: 34,270 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS walking floor semi-trailer, full aluminium, 91.5 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650 / 2,825 mm Axle spacing: 1,310 mm Unladen weight: 7,790 kg Fifth wheel height: 1,150 to 1,180 mm Aluminium chassis JOST axles with large disc brakes, 430 mm, reinforced version WABCO trailer EBS with RSS rollover protection WABCO Smartboard with axle load indicator 1st axle: lift axle 3rd axle: lift axle with WABCO OptiTurn system Aluminium air tanks 6 x 385/65 R 22.5 tyres JOST crank-type landing gear, full-load Tedpfxoxz Nchj Ac Nof ASPÖCK full-LED lighting 4 external LED work lights + 1 LED work light in load compartment 2x V2A stainless steel toolboxes Fully welded interior sidewall seams CARGOFLOOR moving floor with 21 boards, 10 mm thick, ribbed Remote control operation Rear closure plate in stainless steel 3 reinforced bow roof supports (waste version) Reinforced roof roll tarp, Panama 900 g 12 pairs of lashing rings in floor Sidewall protective tarpaulin RENTING is the new BUYING – also available immediately from us as full-service rental.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,181 h, Equipment: ABS, additional headlights, adjustable boom, adjustable chassis, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, parking heater, standard shovel, For sale: fully operational and well-maintained LANZ FB 3000 material handler from 2008. The machine is in very good technical and visual condition, used in accordance with its intended purpose and regularly serviced. The sale includes a complete set of service documentation, operator’s manuals, parts catalog, and German documentation. ✅ Technical specifications: * Year of manufacture: 2008 * Operating hours: only 8,181 hours * Machine weight: approx. 4,500 kg * Drive: 4x4 – all-wheel drive * Engine: Deutz 4-cylinder turbo diesel, 77 HP * Hydraulic stabilizer outriggers * Spacious, glazed cab with full visibility * Clamshell grab – ideal for handling wood, scrap, or waste * Fully operational machine – ready to work immediately Todpfx Aceuui Aho Nof

Year of construction: 2015, operating hours: 1,100 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21932 Specifications: Year: 2015 Hours: approx. 1100 (may increase) Weight: 26,500 kg Power: 54 kW Hopper: 6 m³ Central lubrication Remote control Single owner 3 tires Service history available Ready for delivery Description:Well-maintained Keestrack screening plant with only 1100 hours. The machine has run only 1100 hours, but the hours may increase. It is a zero-emission machine with mains power capability. The machine has had a single owner, and full service history is available. Todpfx Acsx Anbfo Nof Hours: 1100 Own weight: 26500 Kw: 54 Model: Combo Eco Sorteringsverk. 1100 timer! SE VIDEO

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe Tjdsx Aqi Eopfx Ac Nsf N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: used, machine/vehicle number: 13293, Rotor diameter: 450 mm Rotor width: 1000 mm Rotor blades: 9 rows Tsdpfx Acowmg Smj Nsf Stator blades: 2 Drive motor: 75 kW

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request Tedpfx Asw Hb Tfsc Njf * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: excellent (used), functionality: fully functional, Max. air flow rate: 800 m³/h Max. negative pressure: 1,800 Pa Suction connection: 150 mm Suction connection height: 300 mm Drive power: 1.10 kW Connection voltage: 220 / 380 volts (4.33 / 2.5 amps) Dimensions (L/W/H): 610 x 740 x 1,150 mm Total depth: 670 V Sound pressure level: 72 dB(A) Tedpexz Eflsfx Ac Nef Weight: 70 kg • Includes flexible suction arm • Suitable for almost all types of dust • Cleanable, durable bag filter

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Tedpfxsx Agpze Ac Njf Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Tsdpfxsw Sy T Hj Ac Nsf

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Tjdpfsx Aqdcsx Ac Nef 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, machine/vehicle number: 13213, Rotor diameter: 600 mm Rotor width: 1000 mm Rotor blade rows: 7 Stator blade rows: 2 Inlet cross-section approx. 720 x 980 mm Tedswbwxmopfx Ac Nef Drive motor: 90 kW

Condition: good (used), Duplo DPB-500 Perfect Binder Machine in very good condition, ready to work, Low mileage. Machine very fast in settings – control from touch panel. Cover feeding, 3 rollers applying glue including side gluing, milling Photocells, external waste extraction. Tsdpfx Acoxwtuye Nof Technical data: Efficiency up to 530 cycles/h Binding thickness 51mm Max. format 360x320mm Min. format 120x120mm Cover thickness 300g Weight 695kg Power supply 400V

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Number of working hours 1741 h Dimensions (L/W/H) 1650x1200x1595 mm Tsdpfx Acevvx Dze Nof loading dimensions L x W x H 1650x1200x1800 mm Weight 1300 kg WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2009, total width: 1,220 mm, total height: 1,900 mm, total length: 1,750 mm, Empty weight: 600 kg Price: On request - Details: - └ Description: With drain guide - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Transport dimensions: 1750mm x 1220mm x 1900mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 1 Financial information Tjdsx Aqu Ispfx Ac Nof VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS Tjdsx Ary Eepfx Ac Nsf - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms mobile on rollers 2 pieces available Very good condition ready for use!!! Tsdpfx Asivta Noc Nef

Condition: good (used), Year of construction: 2014, Direct Drive Straight Machine APL (Fully-Automated Plate Changing ) InlineColorPilot IPC (Graphometronic): Automatic inline color measuring and controlling system PressPilot Center IntegrationPilot plus Non-stop Antistatic Device on Feeder (Eltex) Antistatic Device on Delivery (Eltex) Ink unit Temperature Control Technotrans (Watercooled) Automatic Blanket Washing Device with Blanket (Elettra) Automatic Ink Roller Washing Device Impression Cylinder Washing Device with Blanket Airglide Delivery ROLAND SelectDryer IR/TL Dryer - High Performance Tjdpexiw Tqefx Ac Nof Performance Package Coating System Tresu with Doctor Chamber Blade Powder Max smart: Powder Sprayer QuickChange Air: Job specific air settings for all relevant consumption points via the control console QuickChange Clamp: Multi-purpose speed clamp for the coating form cylinder QuickChange Color Plus: Color adjustment system with computer-assisted optimization of the ink slide presets QuickChange Transferter QuickStart: re-start with fewer waste sheets Premium Speed: 18.000 s/h max. LCS: Low Coverage Stabilisation of Inks Central Air Cabinet: SelectAirStation

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baling Press Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Operating hours: 7,145 Filling opening: 1,600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 20 s Tying: 4-fold Todpfx Aexzz U Ajc Nof Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles The press is in good condition and has been inspected and tested. A video can be found on our YouTube channel or our website. Note: The press has been overhauled. The knives, counter-knives, and all sliding plastics have been replaced. Please note: All technical data are based on the manufacturer's information. We assume no liability for the information provided or for possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works, prepayment only, without warranty or guarantee.

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No Todpfx Aowmbcyoc Nof - Serial number: 11584/90 - Main motor power [kW]: 11.0 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Extraction dust removal Nedermann type 663 Tedjiyyxcepfx Ac Nef with 2 suction arms Very good condition, directly from production!!!

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Price: On request Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No Tsdpeww T U Nefx Ac Nof - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Tedpfewf U Aqsx Ac Nef Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 Tsdpfxjwu Uy Is Ac Nsf - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels