Used Waste Removel for sale (3,612)

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 6 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Knjdpfx Asva Ekvolyjc Cans and PET bottles Light valuable materials Optional extras Machine colour RAL Strapping rolls Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 6 rolls of strapping A quality product “Made in Europe” Ksdsvugzfjpfx Alyjnc Suitable for compacting Cardboard Plastic film and foils Big Bags Cans and PET bottles Light valuable materials Optional extras Machine colour RAL Strapping rolls Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Kodpjzxqnmofx Alyenc Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2007, Shredder for plastic 45kw power , can chop foil and other plastic into small chunks , we used for bubble foil and polyethylene foam, and LDPE foil. The shredder has also soft start box. Knsdpfsxf Txzox Alyoc

Condition: excellent (used), Wood waste shredder “POR” model CASTORO [Code: MAC-019] USED MACHINE – 380V/50Hz – “CE” Hopper opening: 870 x 425 mm Motor power: 10 HP Knsdpfx Aljz H Uageyec Hydraulic power unit motor power: 2 HP Grid with Ø15 mm holes installed 01 additional grid: Ø 10 mm Output with Ø20 grid: 100/150 kg/h Weight: approx. 1000 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, total width: 850 mm, total length: 1,320 mm, total height: 2,165 mm, For hazardous waste press into drum Knedpfx Aez Tg Drslysc

Condition: used, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg Ksdpfxjyrtcue Alyjnc - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, We are a Polish manufacturer of recycling machines. We offer personalized solutions compatible with die-cutters and die-cutting machines from various brands. All parameters are customized to meet individual customer needs. The RS-601 shredder collects waste directly from the die-cutter, ensuring efficient and smooth operation. It is equipped with a conveyor belt and a feed hopper with an openable bottom, making handling easier and optimizing production. We invite you to cooperate with us. Knsdpsv Eqf Aefx Alyoc RS TeamTech Team

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Kedpfx Ajzc Hkyjlyjnc

Condition: used, machine/vehicle number: 14153, Rotor blades = 3 Ksdpfo Aa D Dzex Alyjnc Stator blades = 3 Drive power: 4 kW

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Knjdpfxoz Eiigs Alyoc Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Kjdpfx Ajx D U N Sjlyenc Year of manufacture: 2012

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Knjdeyhbxcspfx Alyoc Pressing force: 40 t

Condition: ready for operation (used), YEAR OF MANUFACTURE 1993 380V 35A incl. wiring diagram 3,300 x 2,200 x 2,600mm (LWH) Hopper 3,000 x 2,000 x 2,000mm (LWH) Knedeu Hz Stspfx Alyoc

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Ksdpjyq Ngtjfx Alyjnc

Condition: used,

Year of construction: 2026, condition: new, PLN-75 Knjdpfx Ajz Nlfmslyjc Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 30~50Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW 5. Screw Diameter. : 75 mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls

Condition: used, machine/vehicle number: 11635, Cutting mill housing with rotor Kodpfx Aj Aa D D Uelysnc Rotor blades = 3 Stator blades = 2 Opening: 500 x 300 mm

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kedpfx Alswh Naioyjnc Yorick Diebels

Condition: used, Year of construction: 2005, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel Kjdpfozgvhhjx Alyjnc *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW Knedeu Nwwqepfx Alyoc weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m i.D. *

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8797630001, input voltage: 230 V, total height: 2,000 mm, We are selling a Riedel - Glen Dimplex universal water-to-water cooling interface for utilizing waste heat recovery from machinery. Year of manufacture: 2017, but it has only been in use for approximately 2 years. Item designation: 2KTE080G. New price approx. €8,000 net. Inspection is possible. Sale against advance payment, without warranty or return. Knodpfevb Dhpsx Alyec

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Rotor knives: 6 Knsdpjyr Ttmefx Alyoc Stator knives: 2 Inlet cross-section approx. 519×316 Drive motor: 18.5 kW Pneumatic tilting device for upper housing section Without control cabinet and electrical wiring (can be provided for an additional charge). Spare parts and additional plant components are available.

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. Kodorxfn Uepfx Alyenc We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur.

Condition: excellent (used), pressing force: 25 t, Equipment: documentation/manual, Tested, cleaned, full service performed. Fully equipped, ready to use! Knjdpfjx Alctox Alyjc