Used Wave Soldering System for sale (34,072)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Hfedpfx Acov Ta Hlsbjg Dynamic preheating at the bottom Convection heating

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit Hfodpoyt Nlbsfx Acbsg - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Hsdpfxoud Svze Acbofg

Condition: good (used), Year of construction: 2008, Cooling tunnel in return transport Frame transport (frames not included) Hfodsrdwl Dspfx Acbjg Soldering width 330 mm

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Hedpfx Acoyx Etyebjfg

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Hsdpfxjy Skq Re Acbefg

Condition: used, functionality: fully functional, type of input current: three-phase, The ERSA Versaflow 40/50 is an industrial selective soldering system used in SMT/THT PCB assembly lines. It’s designed for automated, high-precision soldering of through-hole components after reflow. Hfodpey I Ttgofx Acbsg Key characteristics commonly found on Versaflow 40/50 systems: - Selective mini-wave soldering with CNC-controlled X/Y/Z motion - Spray fluxing system - IR and/or convection preheating - Nitrogen-assisted soldering for improved joint quality - Single or dual solder pots depending on configuration - SMEMA inline communication support - PCB pallet conveyor handling - Vision/camera monitoring on many configured systems Typical specs from documented machines include: Feature Specification PCB width Up to 400 mm Positioning accuracy ±0.25 mm Solder temp Up to 330°C Conveyor type Pin-chain / roller Fluxing Precision spray fluxer Heating Bottom IR + optional top convection Power 3×230/400 V Nitrogen consumption 2 m³/h Noise level 60 dB(A)

Year of construction: 2008, condition: good (used), Crucible filled with approx. 34 kg of lead-free tin. Original machine documentation and training materials. Condition: inspected, serviced, very good – on-site testing possible. Hfedpfjy Auznjx Acbsg

Condition: excellent (used), Direct from closed ready meals manufacturer in London. Hfodpfx Acoywpb Sobog

Year of construction: 2011, condition: used, Operational condition according to the factory. Ask for additional information! Hfjdpfxoyylpdj Acbjg

Year of construction: 2007, condition: ready for operation (used), A condensation soldering system Rehm is available. Process medium: Galden/perfluoropolyether, process chamber sealing: hermetic, profile control: injection principle, max. process temperature: approx. 240°C, filter: Galden filter, machine dimensions X/Y/Z: approx. 2200mm/1300mm/1650mm, weight: approx. 1250kg. Including various accessories and spare parts. Documentation available. An on-site inspection is possible. Hodpeyyb Trofx Acbofg

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Hodpfxsn Htkto Acbjfg

Condition: excellent (used), Complete 2 basket system for cook chill process, designed for rice, pasta and noodles etc. Wxcellent condition, bought new by a small ready meals factory in Wembley. Hfedjvuvbhopfx Acbog

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Hfjdpfx Aewnfbvscbog Ask for additional details!

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Hjdpfx Ajx Ecuxocbsfg

Condition: used, very good condition Hfsdpfxehc T Iro Acbog

Year of construction: 2019, operating hours: 46,318 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 19051296729, No minimum price – guaranteed sale to the highest bidder! EQUIPMENT - Fixed double-lane pin chain conveyor module - Gripper head with rotation and tilt function - Workpiece carrier EDH-ER + G08 - Double preheating cassette, 8 × quartz radiators Hfsdpfx Acewzu Urobsg - Pyrometer control for quartz preheating Additional equipment details can be found in the attached PDF. Operating hours: 46,318 (as of 10.07.2025) Further information according to manufacturer – without guarantee. TECHNICAL DETAILS - Repeat accuracy: ± 0.1 mm - Rotation function: 0–270° - Soldering angle adjustment: 0–12° by tilting the gripper - Max. workpiece size: 500 × 500 mm - Max. solder tip temperature: up to 350 °C MACHINE DETAILS - Rated voltage: 230/400 V - 50 Hz - Rated power: 18,000 W Dimensions & Weight Installation dimensions (W x D x H): 2,170 x 2,110 mm Nitrogen and compressed air connections - Nitrogen connection: R 1/4″, min. 4 bar - Nitrogen consumption (single nozzle): approx. 1.5–2.0 m³/h - Recommended nitrogen value: 5.0 - Compressed air connection: R 1/4″, min. 6 bar - Exhaust: 1 × 500–600 m³/h Commissioning note: The machine must be connected to the manufacturer via VPN once in order to reactivate the control system.

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box Hfjdpexzrflefx Acbog New timing belt, new impeller for drive installed

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable. Hfodoxp H Ttopfx Acbog

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Hjdpsxzuiajfx Acbofg

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Hfodpfx Aoy Hiuwocbsg Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging Hfsdpfoy I Tq Sex Acbjg If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation Hedeyc H R Tjpfx Acbsfg • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Hfjdpfx Ajyc H U Secbsg Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 Hsdpfjyc H I Ssx Acbefg • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg