Used Wedge Zinc for sale (687)

Condition: new, Year of construction: 2025, drop-through hole in table: 130 mm, table width: 400 mm, table length: 600 mm, stroke adjustment: 70 mm, pressing force: 35 t, ram bore: 35 mm, power: 3 kW (4.08 HP), punching force: 35 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. Bjdsvtxzzepfx Abzsww TECHNICAL SPECIFICATIONS: PRESSURE (TON) 35 STROKE ADJUSTMENT RANGE (MM) 0-70 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 115 RAM - REGULATION RANGE (MM) 45 RAM - TABLE DISTANCE (MM) 330 LOWER TABLE DIMENSIONS (MM) 400X600 LOWER TABLE HOLE DIAMETER (MM) 130 RAM TABLE DIMENSIONS (MM) 120X140 RAM MOLD EYEBALL DIMENSIONS (MM) 35 MOTOR POWER (KW) 3 WEIGHT (KG) 1500 MACHINE DIMENSIONS (MM) (H - W - L) 1100X1400X1800 SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: good (used), Thickness planer Panhnas 630 Max. planing width: 630mm Max. planing height: 250mm Bwsdpfx Absxqxv Nszew Motor: 7.5 kW 2 feed speeds 4 traditional knives (wedge-mounted) Electric and manual table adjustment Split, swiveling infeed roller Rollers in the bottom table Machine checked, ready for operation

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Bodpoxmd T Sefx Abzeww Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Bedpfx Absu Dnruezjww Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. Bedpfx Abjtrlv Sszoww A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Power Split S30 (30 tons) = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Year of construction: 1996, condition: used, Planer Rex Homs 310 With scoring saw from below Planing shafts top and bottom Bwjdpfjchrgrox Abzjw Planing width 310 mm without feed. Feed was here from the endless press of the zinc plant

Condition: good (used), functionality: fully functional, power: 102.97 kW (140.00 HP), fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Year of construction: 2016, operating hours: 3,315 h, Equipment: additional headlights, all wheel drive, car registration, hydraulics, soot filter, trailer coupling, HANSA APZ-1003 Municipal implement carrier with winter service equipment Winter service equipment includes: - FLÖTZINGER Vario wedge snow plow with 170 cm clearing width Bjdexr Dlfspfx Abzeww - GMEINER STA1300S-TC 2-chamber silo spreader The vehicle was manufactured in 2016 and has 3,315 operating hours. It has just been serviced and is in good overall condition with the usual signs of use and wear typical for this equipment class. The sale is as a used machine, excluding return, warranty, and guarantee claims. - Net price: €38,900 // Gross price: €46,291 - Inspection and test drive are welcome! - Nationwide shipping can be organized; shipping costs depend on distance. - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, overall weight: 3,500 kg, empty load weight: 2,850 kg, maximum load weight: 650 kg, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, number of seats: 3, fuel: diesel, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane available immediately, the vehicle is for rent with purchase option. Chassis: Fuso 3S15 Canter - Total weight 3500kg, payload of finished vehicle with loading crane and aluminum platform approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling ball head 3500kg with electrical kit (factory) - Heated exterior mirrors - Automatic air conditioning - Radio preparation - Reversing alarm - Auxiliary drive with speed increase - Battery cover and AdBlue tank cover - Preparation for battery isolation relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum platform: - Inside: 2720mm x W 1820mm x H400mm - Base plate 18mm - Floor frame with airline rail all around - Airline rail also in the front wall Bsdowl Rb Njpfx Abzjww - Side walls anodized aluminum with folding step, easily removable - Storage box - Work lights - Other platform dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of production: Italy) - Lifting capacity according to manufacturer: Max. 995kg 3.2m=815kg, 4.40m=575kg, 5.60m= 400kg, 6.80m= 300kg, 8.05m=220kg - Design according to CE directive (EN 12999) - Swivel range 370° (swivel range limitation 190°) - All hydraulic cylinders double-acting - Piston rods hard chrome-plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support extendable on both sides, special support, support width 3.10m - Hydraulic Support can be swiveled 30° and 180° - CE, incl. M.O.L. - Standard color RAL 3020 traffic red - all cylinders painted black - Load hooks and fastening clamps - On-board voltage 12V - Scanreco radio remote control 6 functions - electrical modules for Danfoss S800 control block 4 functions - Danfoss control block S800, 5 functions including high-pressure filter - Special support, support width 3.10m 1.00 pcs - Additional charge for shortened support legs » by 80mm - Mechanical arm extension N » stroke 1.30 m (7.0k - Additional charge for stainless steel screws and stainless steel pipe clamps - Additional charge for Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block factory-mounted - LED work lights on the articulated arm factory-mounted - LED for 2 support legs - Optional: rear view camera with Carplay, spade holder, 90° rope, additional storage box available Subject to errors and prior sale. ... Air conditioning, climate control, VAT deductible, ABS, electric WFS, central locking with remote control, trailer coupling, power steering, spare wheel, driver's cab: local transport, crane, new, emissions class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/inside/outside), particle filter, can be rented, fine dust sticker: 4 - green

Condition: refurbished (used), Year of construction: 2025, Progressive Header Machine SACMA SP.250 4 Dies - Currently being overhauled. Available upon request from HBR srl. The machine will be completely overhauled. Square wedges. Available with the soundproof cabin, Brankamp, ​​and the conveyor belt. New electrical system with inverter and PLC acc. to Ce Standards. Technical information: Number of dies: 4 Heading tonnage: 650 KN Maximum cutoff diam 500N/mm²: 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Bwjdpfx Asxrdmijbzsw Power of main motor: 30 KW Diam. die: 54 mm. Length die: 90 mm. Diam. punche fixed: 45 mm. Length. punche fixed: 100 mm. Net weight: 11.000 kg. Gross weight: 12.600 kg. We look forward to seeing you at HBR srl in Calolziocorte (LC).

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, cutting length (max.): 600 mm, Automatic Wood Sawing and Splitting with the RM480-E from H&R. The H&R Wood Processor RM480-E is the ideal assistant for your firewood processing operations. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to its innovative design and powerful hydraulic system, operating this wood processor is significantly simplified—ideal for professional forestry operations and ambitious DIY users alike. Unlike competing models, with the RM480 from H&R, ALL functions are hydraulically operated, allowing for faster and easier workflow. Product Features RM480-E Performance: This processor is equipped with a robust 13 HP electric motor. Alternatively, it is also available with a 15 HP petrol engine (RM 480 B). Log Length and Diameter: Logs up to 3 meters in length can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths of up to 60 cm. Hydraulic System: The machine features a hydraulically lowering saw bar. The hydraulic log clamp ensures secure fixation of the wood during splitting operations. Hydraulic height adjustment of the splitting wedge is possible. You can choose between the included 4-way or 6-way splitting cross—for flexible splitting patterns and individual adaptation to your needs. Conveyor Belt: The new 2.2 m long feed belt makes loading logs easier, while the lateral swivel discharge conveyor makes the removal of split wood effortless. Mobile Operation: The processor—including trailer—weights just 750 kg and can be easily moved by hand thanks to its practical transport frame. Simple Operation: All functions can be conveniently operated hydraulically, enabling long working hours without fatigue. At a glance: Bwjdpfx Absu Dkufszjw • Sawing, splitting, and conveying in a single work step • All functions hydraulically operated • Efficient and powerful motor • Splits wood up to 48 cm in diameter and 60 cm in length • Can handle logs up to 3 m in length (with accessory table even up to 6 m!) Price Electric Motor (13 HP) RM 480 E (net) €7,550.00 Petrol Engine (15 HP) RM 480 B (net) €7,385.71 Additional Options With the optional lift table or a chain conveyor, logs up to 6 meters in length can be processed effortlessly. Technical Details Weight (incl. trailer): 750 kg Shipping cost: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. split wood diameter: 48 cm Max. split wood length: approx. 60 cm Max. log length: 300 cm Motor: Electric, 13 HP Hydraulic oil: 46 Hydraulic connections and control levers are pre-installed, making the machine operational in no time. Take advantage of the powerful and well-engineered technology of the H&R RM 480 wood processor. Order today and make your firewood processing more efficient, safer, and more comfortable!

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,920 kg, empty load weight: 2,080 kg, loading space volume: 13.8 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,000 mm, Price on request. The price applies ex stock 33106 Paderborn! Quantity discount available for purchase of multiple containers. Leasing/financing options available. 1 unit available directly from stock, RAL 7043 2 units available at short notice, other RAL colors selectable Other versions and sizes available from stock in Paderborn. You are welcome to check our stock list on our website. Roll-off container according to DIN 30722-1 Technical description: • Internal dimensions: 6000 x 2300 x 1000 mm (L x W x H) • Usable volume: 13.8 m³ • Dead weight: 2080 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • All sheets and profiles fully welded • Double-wing doors with safety lock • Additional longitudinal reinforcements (belly band) for increased stability • Container tested and approved according to DGUV Rule 114-010 • Standard ladder, bolted, galvanized • Rounded floor-to-sidewall connection • Hook diameter: 50 mm, S355 • Hook height: 1570 mm • Top frame: round tube 89 × 6.3 mm • Mesh hooks • All moving parts greaseable • Steel roller: 159 x 6.3 mm, length 300 mm • Zinc phosphate primer inside and out, exterior finish with synthetic resin paint (80-100 μ) • Permissible total weight: 15,000 kg Bwjdpfx Asw D Dnyobzew Subject to prior sale and errors excepted. Photos for illustration purposes only! If you have any questions, feel free to send us a message or call us.

Year of construction: 2001, condition: used, Fully automatic feeding for finger jointing line Table width max 620 mm Spinfeeder Automatic length sorting 3 lengths Bundle formation 3 x Bwjdpfx Aboh Icimjzow Buffer Packet turner Packet destacking Manual loading Buffer in front of zinc tray with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm wood cross section: min. 20 x 40 mm max. 80 x 180 Capacity: 6 milling tables/ min working height: 960mm Table width: 620 mm Plant width: Plant length: see pictures Plant is immediately available, already dismantled

Condition: new, machine/vehicle number: 5c7120ea17bcf92d3b69899da, empty load weight: 14 kg, maximum load weight: 35 kg, overall weight: 50 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with exchangeable 2 king pins 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2x wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit with spray flaps behind each axle 1x storage box Box, w=2 350 mm x l=730 mm x h=640 mm, bolted transversely at the front to the floor of the gooseneck, with 2 storage trays Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Excavator trough above the rear axles starting to the rear, approx. 500 mm wide and approx. 230 mm deep Low loader lashing eyes 3 pairs of lashing eyes per 10 tons at the front gooseneck, 8 pairs of lashing eyes per 10 tons in the low bed, 3 pairs of lashing strips in the tramline area of the low bed, 3 pairs of lashing eyes per 10 tons in the axle/rear area Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Hydraulic forced steering via saddle deflection wedge acting on all 3 axles, Post-steering with radio remote control + auto toe-in, (up to max. 20 km/h)Note! A 2-pin Nato socket with at least 2 x 35 mm² is required in the truck for the power supply to the steering system. Power is supplied to the pump unit via a Nato connection cable to the towing vehicle, without truck installation (re-steering must be used once a week). Air suspension Bsdpfxei Ri Hgj Abzsww Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable With lifting & lowering valve, hold function in lowering position + auto-reset function Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle driving stability system Trailer Infocenter, for displaying vehicle data such as axle loads (no calibrated scales), mileage and diagnostic/system messages. Electrics 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1x additional LED work light(s) at the rear, switched via reversing light 1x LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel / checker plate covering In the tramline area with 70 mm softwood floor, in the wheel housing area with steel / checker plate covering, low bed can be raised hydraulically on the left and right in the tramline area for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Drop deck length approx. 6,300 mm Drop sides 25 mm aluminum h

Year of construction: 1989, condition: ready for operation (used), Media Chip conveyor Yes Bodpfx Abjxiri Tszeww This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, table height: 755 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Press Width 1000 Mm Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Bwodjvxtgispfx Abzjw Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.

Condition: good (used), Technical Data for Pallet Rack System: Racking System: Vogelsang Type: NS Bjdpsw Tykhofx Abzeww Technical Data for Installation: Number of rack rows: 01 unit Length per rack row: 11,150 mm Number of sections per rack row: 04 units Technical Data for Capacity: Pallet spaces per section: 09 units Pallet spaces per rack row: 36 units Total pallet spaces: 36 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Maximum weight per pallet: 900 kg Scope of supply includes: 05x pallet rack uprights, used Colour: green Profile dimensions: P 70 x 80 x 2.50 mm Incl. horizontal and diagonal bracing, foot plates The uprights are pre-assembled (bolted frame) Height: 3,600 mm Depth: 1,100 mm 16x pallet rack beams, used Colour: orange Box profile: 110 x 50 mm End connector: 4-hook Clear span: 2,700 mm Max. load capacity per pair of beams: 2,700 kg, with evenly distributed load 32x safety pins, used Finish: sendzimir galvanized To secure the longitudinal beams against accidental lifting 20x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material/finish: carbon steel, galvanized Approved for: cracked concrete 10x levelling plates, used Finish: completely galvanized For levelling uprights installed on uneven floors 01x load sign With details of section and level loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is offered for collection only. Any requested transport or shipping will incur additional costs, which can be provided upon request depending on delivery location and scope.

Condition: new, Year of construction: 2025, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) Bwsdpfx Abof H Hlrozjw volt. 380 ( model F85CV - F120CV - F240CV ) 100% made in ITALY CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: used, empty load weight: 7,400 kg, maximum load weight: 27,400 kg, overall weight: 34,800 kg, axle configuration: 3 axles, first registration: 01/1989, loading space length: 12,800 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, loading space volume: 77 m³, total length: 2,500 mm, total width: 3,750 mm, suspension: air, tire size: 14/80R 20, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, air-suspended, last axle positively steered, ABS (anti-lock braking system), roller shutter, aluminum side bumpers, supports Body: box semi-trailer with roll-up door, last axle positively steered via wedge, was used by the previous owner as a factory-internal semi-trailer (for trade fairs). The trailer is currently being rented out but can be viewed at any time! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - . Bwedpfovhhflox Abzow

Condition: new, machine/vehicle number: 7272fc3b6a97f9be58a222f05, empty load weight: 5 kg, maximum load weight: 32 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis Saddle Container Fine-grained steel welded construction, fifth wheel plate with interchangeable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with incl. guide wedges on both sides Incl. guide wedges, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Bwodpsi Riv Ejfx Abzow Locking cross member, 2-fold for locking 1 x 30 foot or 1 x 40 foot container. Adjustment via central telescope as an interlocking central tubular frame with bolt lock. Optimum fifth wheel load when transporting 30 foot and 40 foot containers. 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EG Hydraulics 100 Low-pressure cylinder max. 150 bar, with HDK screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Incl. Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 170 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck instal. calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light

Condition: like new (used), ffor PAUL KME 2 or BM edger and multirip saw, overall length 420 mm, 160 mm or 105 mm, clamping length 375 mm, 110 mm or 55 mm, bore Ø 60 mm, outer Ø 75 mm, flange Ø 120 mm, 2 external wedges, saw bushes with left-hand thread or right-hand thread available Bodopky Aaspfx Abzoww

Condition: used, maximum load weight: 31,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2020, next inspection (TÜV): 02/2023, loading space length: 13,000 mm, total width: 2,550 mm, total height: 1,320 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams Bwodpfsi Rtd Iex Abzew * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: new, machine/vehicle number: a203d9a559ff6484cf2a14c1f, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, fifth-wheel plate with replaceable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with guide wedges on both sides, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 20 foot or 1 x 30 foot container. (Note! low fifth wheel load for 20 foot containers) Adjustment via central telescope as an interlocking central tubular frame with pin lock. 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1850 mm 2 wheel chocks with holder Half-shell mudguard with anti-spray flaps according to EG Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 Manufacturer's choice Steel rims, factory silver Incl. Electrics 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Additional LED work light(s) at the rear, switched via reversing light Country of registration / plates Germany Bwedpfxji Ri Avj Abzow Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa stool bodies * 16x OptiPa one-piece aluminum stanchions * Sturdy aluminum front wall approx. 2500 mm high * Max. fifth-wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with starting aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart-Board * EBS brake system * All cables are protected inside the side members * 3 mm smooth sheet metal cover welded through between the side members * Tires: 6x brand-name tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Round tube underride guard mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side Bwsdpfoi Rtgqex Abzow * 2x toolbox approx. 600x400x400, plastic * Anodized aluminium side bumpers * KTL coating with zinc phosphating, highest corrosion protection Also available for hire at short notice. Further information on request.

Condition: new, machine/vehicle number: 28b2dda4ac4da850b1010673a, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis Saddle Container Bwsdsi Ri Euopfx Abzow Welded fine-grained steel construction, fifth-wheel plate with replaceable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with guide wedges on both sides, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 20 foot container (Note! low fifth wheel load for 20 foot containers) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1850 mm 2 wheel chocks with holder Half-shell mudguard with anti-spray flaps according to EG Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK Screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension 3 SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons Gross train weight Air suspension. Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck instal. calibrated scales) Wheels and tires 6 385/65 R22.5 tires of the manufacturer's choice 6 steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Country of registration/ plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: used, machine/vehicle number: d25bedc76ae946ce00df59d5c, empty load weight: 11,600 kg, maximum load weight: 35,900 kg, overall weight: 47,500 kg, axle configuration: 3 axles, first registration: 06/1982, tire size: 9,5 r17,5 zwilling, Further information 1st axle rigid, 2nd + 3rd axle hydr. positively steered with saddle deflection wedge, 1 pair of hydr. support legs incl. hand pump for emergency operation, leaf suspension, 6 storage compartments, steel riffle plate complete, air: red-yellow + electrics: 1x 7-pin Length of gooseneck approx.: 4,380 mm Bodoi Riyzepfx Abzeww Length drop deck approx.: 11,300 mm Saddle height approx.: 1,200 mm