Used Wedge Zinc for sale (692)

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers Ltsdpfsvvafyjx Aanea -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Condition: excellent (used), functionality: fully functional, Möhringer splitting wedge with large opening and pressure roller. Can also be adjusted across the center. Ltodjv Tbxpjpfx Aanea

Condition: used, load capacity 7,700 kg Ltodjfii Dpepfx Aanea can be screwed-on with insulation plate B4 construction height 63 mm in middle position adjustment range +4 / -6 mm dimensions 200 x 200 mm internal thread M20 weight 9.5 kg - new - unused - 6 units on stock price per unit  

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Ltjdpfx Aeu S N Ahsanoa Zinc melting furnace ZSO 600 / 700 B

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 65 mm -Insertion depth: 40 mm Ledpfxovvagks Aansta -Dimensions: 565/154/H105 mm -Weight: 20.1 kg

Condition: used, load capacity 25,000 kg freestanding insulation plate and anti-slip plate on the underside Lsdpfxsfii Dmj Aaneta anti-slip plate on the upper side construction height 88 mm in middle position adjustment range 13 mm dimensions 370 x 230 mm weight 31.8 kg - new - unused - 21 units on stock  price per unit    

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 24 h, functionality: fully functional, machine/vehicle number: DEGONGET202309, total height: 2,400 mm, total width: 1,500 mm, total length: 3,420 mm, manhole location: top, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 380 V, machine base height: 200 mm, operating pressure: 2 bar, control cabinet width: 200 mm, control cabinet length: 650 mm, control cabinet height: 650 mm, year of last overhaul: 2023, temperature: 100 °C, cone diameter: 150 mm, control voltage: 380 V, operating temperature: 100 °C, overpressure (max.): 2 bar, water tank capacity: 1,000 l, tank capacity: 1,000 l, warranty duration: 24 months, Equipment: CE marking, Used 1000L Two-Vessel Brewhouse Mash/Kettle + Lauter Tun Used 1000-liter brewhouse, previously operated in a craft brewery. Configuration: • 1 × Mash / Kettle vessel • 1 × Lauter Tun Key Specifications: • Capacity: 1000 L per batch • Material: Stainless steel SUS 304 (316 optional) • Heating: Steam jacket or electric (to be confirmed) • Insulated vessels • Food-grade polished interior Mash / Kettle: • Combined mashing & boiling • Top manway • CIP spray ball • Temperature probe port Ledpfx Asx Ib Hhjanjta Lauter Tun: • Stainless steel false bottom / wedge wire screen • Spent grain outlet • CIP spray ball • Top manway Condition: • Used, good working condition • Cleaned and maintained • Inspection available Notes: Pumps, control panel and auxiliary equipment available on request. Photos and videos can be provided.

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning Ljdsxxbr Aepfx Aaneta + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm Lsdpfewv Uvfsx Aaneta -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm -Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Accessories: 1x bezel, Multifix tool holder, tools as shown in photos -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Condition: good (used), Year of construction: 2001, 3-Axis CNC Press Brake with HACO-Robosoft ATS 590 Graphic Control Manufacturer: HACO, Origin Belgium Model: ERMS 40135 Year of manufacture: 2001 / retrofit in 2008 with ATS 590 Technical data: Press force: 135 t Bending length: 4000 mm Features / Accessories: • 3-axis CNC control HACO ATS 590 Graphic (Y, X, and R axes for stroke depth and back gauge forward/backward + up/down) • Back gauge fingers adjustable together/apart manually • Manual table crowning by handwheel beneath the die with SIKO digital counter; also adjustable in the tool cassettes via wedge Delivery time: 21.01.2026 ex location D-32425 Minden, loaded free on truck Siegfried Volz Werkzeugmaschinen Ljdpox Npiyefx Aanota Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2017, condition: excellent (used), Tool temp TT-142N/ MP-988 (2017) TOOL-TEMP TT-142 N – Full Equipment & Technical Specification (English) Application: Model N – water up to 140°C Pump with axial mechanical seal Robust high-performance pressurized water temperature control unit Heating capacity: 12 kW Standard Equipment: 1. Temperature controller with self-optimization and digital display of set and actual temperature (°C/°F selectable) 2. Automatic temperature monitoring; alarm on deviation 3. Pump pressure gauge and system pressure gauge 4. Pressure reduction, venting, automatic water filling 5. Scale-resistant heat exchanger 6. Standard pump with axial mechanical seal 7. All water-contact components made from stainless steel or bronze Ltsdpfsx E Uqbsx Aansa 8. Heating elements switchable in stages 9. Safety features: automatic level control preventing dry running; mechanical safety thermostat; electronic maximum temperature limiter; main switch; isolation transformer; overload relay for pump protection; acoustic alarm 10. Visual fault indication 11. Unit on castor wheels Special Features: 1. Digital flow indicator with minimum-flow monitoring 2. Optional MP-988 controller with digital interface Technical Data: Temperature range: water up to 140°C Temperature regulation: microprocessor-controlled controller MP-888 with self- optimization; digital display of set and actual temperature; automatic temperature monitoring Flow monitoring: electronic, digital display, automatic minimum-flow alarm Heating capacity: 12 kW (6/6 kW switching stages) Cooling capacity: indirect approx. 60 kW at 140°C Pump performance: motor 1.8 kW; pressure mode max. 5 bar / 110 l/min; suction mode vacuum up to 8 m water column; no booster pump External temperature measurement: no Pressure reduction: yes Leak-stop / mold emptying: no Filling: automatic Connections: Medium: ¾” BSP female Cooling water: ⅜” BSP male (inlet with filter), ⅜” BSP female (outlet) Dimensions and weight: 870 × 360 × 915 mm (incl. wheels) Approx. 107 kg empty Color: zinc grey RAL 7001 Electrical versions: Available for all voltages from 3×200 V to 3×600 V, 50/60 Hz UL/CSA compliant For US market: NPT connections, controller display in °F Electronic Controllers: MP-888 (standard): °C/°F display; analog interfaces 0–5 V, 0–10 V, 4–20 mA; high-precision control via self-optimization; flow indication in l/min or gal/min; minimum-flow alarm MP-988 (optional): digital interfaces RS-485, RS-232, 20 mA loop, CAN-bus, Profibus; supports common communication protocols; temperature difference monitoring; display of up to three temperatures

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves Ljdpfx Aex Np Ehsansta

Year of construction: 2008, condition: good (used), For sale is a Krauss Maffei brand injection molding machine type KM 110-380 The machine is in a good to very good condition, all maintenance and inspections have been performed Technical data: Year of manufacture 2008 Extended tie bars Pneumatic valve gate 2X Hydraulic core puller 31000 operating hours Cylinder D35mm Mould closing force: kN 1100 Mold opening force: kN 70 Euromap63 interface for version > 1-04-09 Nitrogen battery present Included component Wedge shoes with bolts and nuts Double bit wrench Declaration of conformity cpl switchboard Certificate USB memory stick Ejector coupling-mechanical Enclosed in the control cabinet All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website Lsdpfx Asibyatoaneta

Condition: like new (used), - machine in stock - after the technical review - very good condition - stacking wedge stacking in one cycle possible   TECHNICAL SPECIFICATIONS: elements length 3000 mm elements width 1300 mm element height 1600 mm element centering number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic lifting of material 1.5 kW pump motor Ltodpjfg Iqgefx Aanja 1.8 kW arm motor number of cycles 12 / min    number of pickup rollers 48 roll height from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm

Condition: excellent (used), Year of construction: 1968, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Schaublin, lead screw and feed screw lathe type 135 -Machine bed: hardened -Turning length: 750 mm Lsdpfxsw Rd Hbo Aanota -Turn diameter over bed: 315 -Rotation diameter over recess: 355 mm -Turning diameter over support: 150 mm -Spindle bore: Ø 34 mm -Spindle speeds: 45 - 3000 rpm -Wedge bar chuck: Forkardt Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5/3.0 kW -Accessories: Drawer cabinet with 2x bezels, 28x Multifix tool holders, collets, see photos -Lathe dimensions: 960/1700/H1290 mm -Weight of lathe: 1230 kg -Cabinet dimensions: 480/725/H1000 mm -Weight of cabinet: 222 kg

Condition: used, maximum load weight: 30,080 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2022, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), aluminum wear strips on the end pieces, stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Ljdpfovnpdpjx Aanota

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ltodpfx Asx Ihxdeanea

Condition: new, Year of construction: 2021, Your contact persons in our company Mr.: Andre Evering Mr.: Mario Klöver Mr.: Simon Blank Included in delivery: 01x end post elevation, new Finish: Universal Material color: RAL 1018 Zinc yellow Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1.150 mm depth Frame profile dim.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pcs. Our services at a glance: (prices on request) - assembly, erection our general assembly conditions are to be observed - Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all racking systems - Delivery with our own fleet (without unloading) Lodpfx Aodd Ewbeanjta Shipping costs on request!

Condition: used, maximum load weight: 27,090 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2022, loading space length: 14,750 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 100 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 100 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF INTRA axle(s), disc brakes, air suspension with lifting/lowering device HA, SAF support winches, storage box, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Ledevnp Arepfx Aanjta

Condition: new, Scope of delivery includes: Heavy-duty anchor, HST2 V3 M12x105 5-25 Order quantity: 25 pcs. Manufacturer: Hilti Version: Carbon steel, zinc-plated Approved for: cracked concrete Through-fix installation: + Pre-fix installation Diameter: M12 Drill hole Ø / Depth: 12 x 88 mm Nominal embedment depth: 80 mm Ltodpfxswhfluj Aanoa Effective embedment depth: 70 mm Anchor length: 105 mm Clamping thickness: 10 mm Weight per piece: 0.100 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or delivery is required, additional costs will apply, which can be requested from us depending on the delivery location and scope.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,470 mm, loading space width: 2,470 mm, loading space height: 1,500 mm, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,040 mm, Equipment: ABS, Aluminum box body approx. 27.7 cbm, galvanized chassis, fifth wheel height 1200 mm, externally mounted tailgate, additional manual tension locks, floor made of 7 mm aluminum sheet, 3 mm aluminum wear plate at the rear (wedge design), profile joints fully welded, automatic-mechanical 4-hook locking, HYVA tipping cylinder, rolling tarp, load pressure gauge, towing coupling, drop-down support legs at the front, bodywork painted in RAL 9007 grey aluminum, ABS, EBS, SAF INTRADISC ?CD? axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, on/off switch for tipper lowering, tire pressure monitoring, 24V lighting – ASPÖCK FULL-LED ECOLED III, 2 reversing lights, toolbox, vehicle may have advertising decals and/or lettering. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide an offer from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Lsdpoxnvdfjfx Aanjta We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: Mecalux Technical Specifications for Installation: Number of rack rows: 01 unit Length per rack row: 17,625 mm Number of bays per rack row: 09 units Number of levels plus ground level: 02 units Volume Specifications: Pallet spaces per bay: 06 units Number of pallet spaces per row: 54 units Total number of pallet spaces: 54 units Included in scope of delivery: 10x pallet rack uprights, used Material finish: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, base plates Uprights are pre-assembled Ltodpfx Aovzappeanea (bolted lattice work) 2,000 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box section profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 72x integrated safety pins, new For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Version: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign with field and compartment load details, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs. Please enquire with us for exact costs, which vary depending on delivery location and scope.

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 unit Length per rack row: 75,975 mm Number of bays per rack row: 39 units Number of levels plus ground level: 02 units Volume data: Pallet spaces per bay: 06 units Pallet spaces per row: 234 units Ledpovzat Uefx Aanota Total pallet spaces: 234 units Scope of delivery includes: 40x pallet rack uprights, used Material finish: Sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, baseplates Uprights are pre-assembled (bolted lattice construction) 2,000 mm high 1,100 mm deep 156x pallet rack beams, new Material finish: RAL 2001 orange Beam type: TB-S 100 Box profile: 100 x 50 mm Clear span: 1,825 mm Maximum load per pair of beams: 2,000 kg with evenly distributed load 312x integrated safety pins, new To secure the longitudinal beams against accidental lifting 160x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 80x leveling plates, used Design: fully galvanized For leveling uprights set up on uneven floors 01x load sign With details on bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping beyond this can be arranged at additional costs, which can be quoted separately depending on the place of delivery or scope of supply.

Condition: good (used), clear span: 3,600 mm, total length: 18,720 mm, load capacity: 3,300 kg, shelf height: 6,000 mm, Technical data for pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for installation: Number of racking rows: 01 pc. Length per racking row: approx. 18,720 mm Number of bays per row: 05 pcs. á 3,600 mm Number of levels incl. ground level: 03 pcs. Technical data for volume: Pallet spaces per bay: 16 pcs. Pallet spaces per row: 80 pcs. Total pallet spaces: 80 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Weight per pallet (max.): 825 kg Scope of delivery includes: 06x pallet rack uprights, used Material finish: Sendzimir galvanized Type: SR120|20 Profile dimensions: 120 x 75 x 2.00 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,100 mm deep 30x pallet rack beams, used Material finish: orange Box profile: 140 x 50 mm Beam type: HS140|15 Ltsdpow Iqiwofx Aansa Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per beam pair: 3,300 kg, with evenly distributed load 60x safety pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 12x shims, used Finish: completely galvanized For leveling rack uprights installed on uneven floors 01x load sign Including field and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Additional transport or shipping services for this item are subject to extra charges, which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), clear span: 1,400 mm, total length: 7,510 mm, shelf height: 1,750 mm, Technical data for the pallet racking system: Rack system: Stow Model: Pal Rack NS Technical data for installation: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units á 1,400 mm Number of levels plus ground level: 02 units Scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 HK (hooks) Ltsdpfx Aasw I R Slenja Design: header beam Clear opening: 1,400 mm 40x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x shimming plates, used Finish: fully galvanized For leveling rack uprights positioned on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. If transport or dispatch is required, additional costs will be incurred, which can be quoted separately depending on delivery location and scope.