Used Weingarten Press Austria for sale (73)

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request Itsdpfx Aasvuk Snonor

Year of construction: 1971, condition: used, pressure 160 t throat 440 mm stroke 20 - 120 mm table surface area 1050 x 750 mm no. of strokes 42 u. 62 Hub/min ram surface 800 x 500 mm Iodpocyc Adefx Aanetr tool shank hole (depth x diameter) 85 x 50 mm hole in the table 355 mm daylight (stroke down, ram adjustment above) 455 mm ram adjustment 100 mm weight of the machine ca. 11,2 t

Condition: good (used), Weingarten Eccentric Press AV10 - with gripper feed - uncoiler and recoiler - During pressing, the speed can be adjusted via frequency converter - Pressing force: 10 t Iedpfxsx Emvve Aanjtr - Strokes per minute: 160 - Ram stroke: 6-60 mm - Ram adjustment: 40 mm Good condition, fully functional, can be inspected and tested under power on site. Shipping also possible abroad. Inspection: I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. Should you have any general questions or wish to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping by freight company.

Condition: good (used), Manufacturer: WEINGARTEN Type: ER 125 Itsdpjn D Ebajfx Aansr Table size: 800x620 mm A small crack is visible on the load-bearing part of the press; it has been used this way for years. !!

Condition: used, Year of construction: 1966, functionality: unexamined, punching force: 240 t, We are selling a Weingarten PS180 press here. According to the nameplate, it has a punching force of 240 tons. We purchased the press as fully functional approximately 20 years ago, but it has never been connected or put into operation since the intended project for this machine never materialized. Therefore, the coupling elements, control cabinet, and air reservoir remain dismantled, but everything is complete. As a result, on-site demonstration is of course difficult. Iodpfx Aox Ei Iueanjtr

Condition: defective spare-parts repository (used), Year of construction: 1974, functionality: not functional, machine/vehicle number: 121645, table height: 910 mm, table width: 650 mm, stroke adjustment: 63 mm, overall weight: 4,000 kg, pressing force: 63 t, space requirement length: 1,200 mm, space requirement width: 1,900 mm, space requirement height: 2,800 mm, The eccentric press has a clutch defect and is currently non-operational. Without the column stand mounted in the pictures. Ijdpfxex D Tngj Aanotr

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm Itedpfxovuk Rke Aaner stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 - installation of moving screen 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse / Safety adaptations / mechanical overhaul / new electrical control can be offered additionally on request

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm Itedpfx Aaetqm Dmjnsr total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Itedpfxoxz Hxaj Aansr Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: good (used), 4 x eccentric press Ebu / Weingarten consisting of the following types: Itedpfsq Rdr Tsx Aaner 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 1 x Weingarten A 40 The machines can be inspected on site.

Condition: used, Further plates in stock, here number 1: Width x Depth x Thickness = 770 x 580 x 90 mm Hole = 131 mm and 200 x 300 mm and number 2: Width x Depth x Thickness = 800 x 600 x 60 mm Hole = 150 mm and number 3: Width x Depth x Thickness = 650 x 500 x 60 mm Hole = 120 mm and number 4: Width x Depth x Thickness = 550 x 440 x 80 mm Itsdpfexx U S Njx Aansr Hole = 195 x 150 mm and number 5: Width x Depth x Thickness = 315 x 320 x 40 mm Hole = 95 mm

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm Iodpfxovuuaij Aanjtr table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm Itjdpfxotycdko Aanor column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: good (used), Year of construction: 1976, functionality: fully functional, Technical data : Power 40 to 2 lifting speeds 57 + 86 H/min Projection 250 mm . Further data according to offer . Itsdpfxjxxbmye Aaner Delivered with new press test incl. new test report. .

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available) Ijdpfx Aajvut N Ajnotr

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation Iodpfecubatjx Aanjtr - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm Ijdpfxjvuk Rwe Aanjtr power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: used, Year of construction: 1985, Pressure 080 t throat 345 mm stroke 20 - 160 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 495 mm table surface area 920 x 610 mm table height over floor 800 mm Hole in the table 280 mm passage to the back 670 mm ram surface 650 x 400 mm Itjdpfx Aajvuug Njnsr ram adjustment 50 mm power capacity 10,0 kW weight 7,7 t Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, hydraulic overload protection in ram, manual stroke adjustment, motoric ram adjustment, motoric centralized lubrication, two-hand operation Press is at the moment being overhauled electrically and mechanically - video is from before starting the overhaul WITH mechanical partly overhaul, WITH new electrical control Pilz

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm Iedpfx Aaovuubasnotr permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Itjdpfxsvuua As Aansr Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Hole in the table 280 / 315 mm Table height above floor 800 mm Passage to the back 500 mm Ram surface 650 x 400 mm Ram adjustment 70 mm Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm Ijdpfxovuuc Ro Aanjtr power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual centralized lubrication, two-hand operation

Condition: used, Year of construction: 1988, pressure 200 t stroke 30 - 160 mm no. of strokes 40 - 120 /min distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t Iedovut S Djpfx Aanetr dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation Itedpfx Aajvut Npenjr

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm Iodpfx Asvut Nceanstr dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min Ijdpfx Aajvut E Rsnetr distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation press can be inspected in running condition in our warehouse