Used Eccentric for sale (772)

Call

Condition: good (used), Press force: 300 t Stroke length: 200 mm Stroke speed: 20-60 1/min Iu89xsmti Shut height: 680 mm Ram adjustment: 200 mm Overall size: 2600x2000x4200 mm

more

Listing

Králova 279/9, 616 00 Brno-Žabovřesky, Tschechien

6,306 km

Eccentric press Typ C

Condition: good (used), Year of construction: 1980, In good technical condition. PRESSING LINE. Pressing force: 1600 kN. Ram adjustability: 100 mm. Stroke: 8-120 mm. Speed: 40-120 1/min. Table clamping surface: 900x1000 mm. Ram clamping surface: 800x500 mm. Drain hole: 180x600. Press size: 4.70x1.65x4.15 m. Weight 15.6 t. Unit intended for guarding tools: Unidor UN 6000. Magnetic waste conveyor. FEEDER. Manufacturer: ABS Type: WV-SRF400ESV Year of manufacture: 2001 Maximum belt width 400 mm Belt thickness: 0.2-3 mm Belt cross-section: max. 400N/mm2 Weight: 350 kg Programmable CPS 20 Cylindrical, pneumatic EQUAL. Manufacturer: Dreher Automatic – Systeme GmbH Type: 1675-CV/ Modell 1443 Serial number: A–10/652 Year of manufacture: 1980 Maximum belt width: 635 mm Belt thickness: 0.4 - 4 mm UNWINDER. Manufacturer: Kohler Maschinenbau GmbH Type: 2000.1 H Serial number: 89120 Year of manufacture: 1994 Load capacity 2000 kg Maximum belt width 400 mm Expansion area 460-530 mm Ixuvgxeerr The unwinder is without a drive with a brake

more

Listing

Hessisch Lichtenau

6,811 km

SCHULER PEn 315 / 180

€1,800

Call

Condition: used, Single column eccentric press SCHULER type PEn 315 / 180 Machine No. 43-9756 Compressive force 31,5 ton. throat 185 mm width between the side columns 250 mm table size 610 x 370 mm table opening Ø 305 mm ram area 255 x 250 mm clamping spigot bore Ø 50 mm stroke adjustment 8-100 mm ram adjustment travel approx. 80 mm Installation height approx. 290 mm Stroke rate 100 strokes/min. Table height above floor 780 mm motor power 1,5 kW Vwjiuwgw3 Mains connection 380 Volt, 50 Hz - machine stand tiltable via threaded spindle - mechanical foot switch for stroke release space requirement L x W x H 1450 x 950 x 2250 mm dead weight 1,5 ton.

more

Listing

Bünde

6,894 km

MUELLER AMP 60

Call

Condition: used, Year of construction: 1965, pressure 60 t throat 280 mm stroke 140 mm table-size 750 x 520 mm Strole of rum/minute 100 ram adjustable 55 mm stroke adjustable from - to 10 - 140 mm mould space 340 mm hole in the table 230 x 175 mm table adjustable 220 mm Trbu9mfdo tool hole in ram 40 mm total power requirement 2,95 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 1,5 x 1,2 x 2,4 m Condition: ready for operation Video(s) available on our website. Electric 380 Volt Foot switch adjustable table Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m².

more

Listing

Strassberg

(dealership location)

6,847 km

Eccentric C-Frame press

PME PE 63 AM

Call

Condition: used, Year of construction: 1996, machine/vehicle number: 116, Capacity: 63 ton Throat depth: 280 mm Crjtgzyviw Ram stroke: 8 - 100 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 246 mm Distance table to ram: 346 mm Table surface area : 900 x 550 mm Slide area: 450 x 300 mm Number of strokes: 100 s.p.m. Height of the bolster plate: 80 mm Table height over floor: 800 mm Required power: 5,5 kW Dimensions L x W x H: 1380 x1258 x 2810 mm Weight of machine approx.: 4,3 ton Standard configuration Machine is sold without the two feeder

more

Listing

Goldenstedt

6,906 km

Eccentric Press 160 Tons - Single Column

RUHRMANN EVR 100

Call

Condition: used, pressure 100 t throat 370 mm stroke 10 - 140 mm no. of strokes 58 Hub/min ram adjustment 80 mm table surface area 900 x 670 mm ram surface 410 x 430 mm table height 760 mm tool hole in ram 65 mm toolpiece height max. 450 mm weight of the machine ca. 6 t L7a8rbipu2 pneumatic clutch-brake combination Mechanical fracture plate in the ram Two-hand operation Foot control UVV until 03/2023

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 160P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 160P - C Frame Eccentric Press - 160 Tons (1600kN) TECHNICAL DATA: * Power: 160 tons (1600kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 172 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 800 x 1100 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame R3ycewv73 * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Tatabánya

6,148 km

Eccentric press - Single column press

Weingarten ER 125 (2381

Call

Condition: good (used), Manufacturer: WEINGARTEN Tip: ER 125 Bc90m9vqaba Table size: 800x620mm

more

Listing

GPA (G.P.A. Italiana S.p.A) ANM 300 x 300

Hessisch Lichtenau

6,811 km

Pneumatic gripper feed for eccentric press Ba

GPA (G.P.A. Italiana S.p.A) ANM 300 x 300

€3,700

Call

Condition: used, Year of construction: 2003, Pneumatic pincer feed GPA (G.P.A. Italiana S.p.A) pneumatic feed unit, belt feed, material feed Type: ANM 300 x 300 Fabr. Nr: 425144 Order- Nr. 2030764 Year of construction 2003 feed length: max. 300 mm belt width: max. 300 mm Beqgxov3lu jaw width: 210 mm Sheet thickness: max. 2 mm (depending on strip width) compressed air requirement: 6 bar Feed force: 120 daN (at 6 bar) Gripper holding force: 300 daN (at 6 bar) - Pneumatic control valves for feed and pincer movement - Feed length adjustable via adjustable fixed stop (central threaded spindle) - Electrical control in control cabinet adjacent L x W x H: 450 x 250 x 1150 mm - for eccentric press or hydraulic press total dimension L x W x H: 1500 x 400 x 950 mm dead weight: 200 kg good condition

more

Listing

Bünde

6,894 km

MUELLER ExP 25

Call

Condition: used, Year of construction: 1973, pressure 025 t throat 190 mm stroke 60 mm table-size 560 x 380 mm Strole of rum/minute 120 ram adjustable 50 mm stroke adjustable from - to 4 - 60 mm mould space max. 330 mm mm hole in the table 230 x 175 mm tool hole in ram 35 mm total power requirement 1,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1 x 1,2 x 2 m Condition: ready for operation Video(s) available on our website. Electric 380 Volt T2gzbgv Foot switch adjustable table Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m².

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 130 P

€78,400

Single-station eccentric presses

Call

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 78400 1575.84 130 to 4.5 mm 650 mm 950 mm 220 mm 1 - 132 mm 50 1/min Bwwsdyvazt 6 95 mm 70 mm 325 mm 500 mm 11 kW 1800 mm 1725 mm 3020 mm 8000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

more

Listing

Deinze

(dealership location)

7,244 km

Bret PCK 160 ton

Call

Condition: used, Bret PCK 160 ton Cb9urj8

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Eccentric Press 130 Tons - Single Column

Fresan FP 130P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) Izu3k0qvh * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Toruń

6,227 km

SMERAL Trnava LEN 25C

€6,400

FCA Fixed price plus VAT

Call

throat depth: 250 mm, ram adjustment: 55 mm, total height: 2,145 cm, table width: 450 mm, table length: 560 mm, stroke adjustment: 85 mm, motor power: 3 W, total width: 1,365 cm, total length: 1,135 cm, overall weight: 2,500 kg, pressing force: 25 t, ram stroke: 55 mm, type of input current: three-phase, Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 1235, Functionality: fully functional, Equipment: Documentation/manual, I have for sale an eccentric tilting press, with pneumatic clutch, made by SMERAL TRNAVA (d. Czechoslovakia), year of production 1985. The press is operational, after inspection. The press is connected to the electrical and pneumatic systems and can be checked on site. I also have for sale a second press of the same type, year of production 1987. The price of this press is identical to the one shown in the offer. Basic technical data: - Press force: 25 tons, - Number of strokes : 75/150 sk./min, - Slide stroke adjustment: 8-85 mm, Binxjqex9zs - Slide stroke: 55 mm, - Table surface: 560 x 450 mm, - Slider surface: 355 x 225 mm, - Clearance between columns: 250 mm, - Number of gears: 2, - Required pressure of the pneumatic system: min. 4.5 bar, - Motor power: 2.2 / 3 kW, - Overall dimensions of the press (L x B x H): 1135 x 1365 x 2145 mm, - Weight: 2500 kG.

more

Listing

Hessisch Lichtenau

6,811 km

RICHTER PEKRS 80

€53,000

Call

Condition: used, Year of construction: 2023, Single column eccentric press RICHTER type PEKRS 80 year of construction 1970 - overhaul 2023 Compressive force 80 ton. throat 350 mm table size 900 x 650 mm drop-through hole in the clamping table Ø 200 mm ram area 700 x 500 mm Stroke rate 70 strokes/min. stroke adjustment 6 - 100mm ram adjustment 85 mm Installation height max. 400 Clamping spigot bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW mains connection 400 Volt, 50 Hz - pneumatic clutch-brake combination ORTLINGHAUS - press safety valve HERION - pneumatic ram balancing cylinder - overload protection with breaking plate in the ram - grease central lubrication with hand pump space requirement L x W x H 1800 x 1250 x 2830 mm weight 5,7 ton. very good condition Technically overhauled and rebuilt with new electrics to latest UVV, completion 02/2023 - Upgrade of the eccentric press to the latest UVV according to BGR 500, chapter 2.3 Ffbriob - Control with plain text error messages and diagnostic screen for quick error localization - new electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - two-hand control panel with emergency stop and engagement interlock - el. foot switch - cam switch with running guard control - Stroke release by press safety valve with pneumatic pressure balance - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes 1 = set-up 2 = Single stroke two-hand 3 = Single stroke foot 4 = continuous run foot 5 = autom. continuous run 6 = reverse run

more

Listing

KK Kletzer Exzenterpresse KK 125 to mit SPS Siemens S7 -12200

A - Niederösterreich

6,349 km

C frame eccentric press

KK Kletzer Exzenterpresse KK 125 to mit SPS Siemens S7 -12200

€85,000

Call

Condition: new, pressure: 125throat depth: 350stroke: 0-140total power requirements: 7,5weight approx.: 7500messurements (LxWxH): 1800 x 1500 x 2550 0r3l9ihx

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 40 P

€36,900

Eccentric Press 100 Tons - Single Column

Call

Condition: new, Year of construction: 2023, neu 2023 7297 prompt, Zwischenverkauf v Türkei 36900 749.07 1 40 to 2.5 mm 450 mm 650 mm 150 mm 1 - 80 mm 125 1/min 4 75 mm 40 mm 225 mm 300 mm 4 kW 1350 mm 1370 mm 2160 mm 2100 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules OPTION: Bww09gdhdk Vibration pads 192,-- Bolster plate 830,--

more

Listing

Schwabach

6,707 km

Eccentric press

EBU , Typ E 50

Call

Condition: excellent (used), at delivery : new UVV-tested . Technical data : Power 50 to Stroke rates 115 /min Bh2ztfzchbr . throat 250 mm ram stroke 8 - 120 mm ram adjustment approx. 70 mm , table, WxD approx. 650 x 500 mm drop-through hole approx. 250 x 180 mm max. installation height approx. 380 mm . .

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 100P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) Bcskcmed783 * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Strassberg

(dealership location)

6,847 km

Eccentric C-Frame press

SCHULER C-80-345

Call

Condition: used, Year of construction: 1982, Capacity: 80 ton Throat depth: 345 mm Ram stroke: 8 - 120 mm Slide adjustment: 71 mm Shut height (stroke down, adjustment up): 230 mm Height of the bolster plate: 140 mm Table surface area : 875 x 695 mm Slide area: 700 x 355 mm Distance between the columns: 450 mm Number of strokes: 120 s.p.m. Weight of machine approx.: 6,5 ton Standard configuration PLC Siemens S5 Extended machine accessories Cfq9d9kuut Dreher Feeder, YOM 1989max. sheet width 300 mm

more

Listing

Hessisch Lichtenau

6,811 km

Double column eccentric punching press eccentric press

BLEMA Gotha PEZ 160-50 MHSY-ES

€25,000

Single-column eccentric press

Call

Condition: used, Double column eccentric punch press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine. No. 88151005 Year of construction 1988 / 92 pressure force 160 ton. column width 970 mm column width lateral 560 mm table size 900 x 900 mm ram area 900 x 700 mm mold installation height 560 mm, max. 700 mm stroke adjustment 8-160 mm ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Band width in roll feed max. 400 mm Motor power approx. 15 kW mains connection 380 volt, 50 Hz - infinitely variable stroke rate via frequency control - automatic stroke adjustment - ram weight balancing cylinder with compressed air - hydraulic overload protection in ram Encrr7r - pneumatic clutch-brake combination - oil central lubrication - precisely guided press ram with oil-lubricated guides - UNIDOR press control system - swiveling control panel - control cabinets of press and feeder, together on one platform next to each other platform dimensions 3400 x 2250 mm, height without feet 2950 mm width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press complete 4150 mm Dead weight of automatic punching press approx. 18 ton. For transportation, the drive motor is dismantled and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 machine no. 1405 and 1406, order no. 910708 (year of construction 1992) - Feed control ALBA PSS 300 - feed length infinitely programmable from 0,1 to 6500 mm per stroke - strip thickness at 400 mm width max. 3 mm - Belt thickness at 300 mm width max. 4 mm - Strip cross section max. 1200 mm2 - roller drive hydraulically controlled from the feed - height-adjustable feed unit on the press for adjusting the material infeed height - hydraulic power unit adjacent - Drag straightener with hydraulic opening and closing Weight of the complete plant approx. 24 ton. Space requirement for transport a mega trailer with 3 meter interior height and 13.6 meter loading length good condition

more

Listing

Staufenberg

6,818 km

VEB GOTHA PEEX 250

Call

pressing force: 250 t, Condition: repair required (used), Single-column eccentric press VEB GOTHA type PEEX 250 serial number 2 130 004 Technical data: Pressure 250 t throat depth 450 mm Installation height 500 mm Stroke rate continuous operation 40 strokes/min Stroke of ram 36 - 126 mm Bh273cxgh9p Opening in the table 160 mm Adjustability of the ram 110 mm Table surface 1250 x 800 mm Ram area 900 x 670 mm Total power requirement 23 kW Machine weight approx. 13.5 t External dimensions of machine approx. 1450 x 3600 x 3400 mm With - separate switch cabinet approx. 600 x 1050 x 2150 mm - Two-hand operation Used, control system in need of overhaul - special price

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 80 P

€54,800

double column eccentric press

Call

Condition: new, neu Ikkbrbn ca. 14 - 16 Wochen ab Auf Türkei 54800 1101.48 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

more

Listing

Ciriè

6,966 km

Komatsu E4S800-MB

Call

total height: 7,200 cm, ram adjustment: 200 mm, Condition: good (used), Year of construction: 1980, Manufacturer KOMATSU Model E4S800-MB Year 1980 Condition Used Stock No.0252 Thrust: 800 ton. Thrust points No. 4 Oalignl8 Table size 2,950 x 2,300 mm. Slide size 2,950 x 2,300 mm. Sled stroke 475 mm. Slide - registration 100 m.. Mold clearance at PMI 1,100 mm. Number of strokes/min No. 14 - 22 Removable carriage Present Height from the press floor 7,200 mm.

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Eccentric Press 80 Tons - Single Column

Fresan FP 80P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 80P - C Frame Eccentric Press - 80 Tons (800kN) TECHNICAL DATA: * Power: 80 tons (800kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 400 mm * Stroke Adjustment: 0 - 112 mm * Ram Adjustment: 80 mm (motorized) * Table Dimensions: 600 x 900 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) O39cwqcjo * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Via Socrate, 10, 96012 Avola SR, Italia

6,370 km

SANGIACOMO T63R CE

Call

input power: 7.55 kW (10.27 PS), Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL FEATURES: Press Model: T63R CE Year of construction: 2004 Nominal force: kN 630 Nominal stroke: mm 5.68 Stopping position: P.M.S Adjustable stroke: mm 12÷140 Mace adjustment: mm 70 Stopping time: ms 139 Safety distance (1.6 m/s): mm 223 Strokes per minute: no. 39 - 90 Max. mold surface: mm 440x720 Max. mold height closed: mm 374 Min. mold height closed: mm 310 Upper mold mass: kg. 60 Turns at 1st of flywheel: no. 236 - 590 Max. insertions at 1°: No. 35 Installed power: KW 7.55 Voltage: V 400 Auxiliary voltage: V 24 Working air pressure: BAR 5.5÷6 Mass: Kg. 5.100 Speed regulation (Inverter) Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts Biloseetp3u NEW COMPONENTS INSTALLED: - Front and side safety guards complete with safety keys; - Foot pedals; - Lubrication system straws

more

Listing

Hessisch Lichtenau

6,811 km

HEILBRONN REPV 75

€5,800

Call

Condition: used, Year of construction: 1972, Single column eccentric press HEILBRONN type REPV 75 make no. 4467 year of construction 1972 pressure force 75 ton. throat 300 mm table size 720 mm x 590 mm ram size 450 mm x 295 mm table height above floor 735 mm ram stroke 12 - 140 mm slide adjustment travel 100 mm Installation height max. 400 mm Clamping spigot bore Ø 40 mm Stroke rate 43/86 strokes/min. Motor power 4.4/7.5 kW drive power 400 Volt 50 Hz. - Table height adjustment with 2 support spindles - Drive with gear reducer - 2- motor speeds Ngsv9 - pneumatic clutch-brake combination ORTLINGHAUS - movable screen, protective screen BLACK - overload protection with crushing plate - automatic central lubrication - 2-manual control panel and electric foot switch for stroke release - control cabinet fixed to the machine - Control cabinet for protective screen adjacent L x W x H 400 x 200 x 600 mm space requirement of the press L x W x H 2300 x 1500 x 2650 mm weight of the press approx. 5,5 ton. good condition

more

Listing

Brandl

5,689 km

Schuler 500 tones

€1,00,000

ONO plus VAT

Call

input power: 120 kW (163.15 PS), table width: 1,800 mm, table length: 3,000 mm, stroke adjustment: 350 mm, motor power: 1,10,000 W, pressing force: 500 t, Condition: defective spare-parts repository (used), Year of construction: 1964, Total Force 500 Tones Table Dimension 3000x1800 mm Total Dimension Press 5000x3000x17000 mm Number stroke/min 16 Year of manufacture 1964 Adjustment Stroke 350 mm Stroke 800 mm Cul2urd7xs Power capacity 120 kW Clutch brake assembly defected

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by DIRINLER CDCS 401 P81

€21,400

Eccentric Press 60 Tons - Single Column

Call

Condition: used, Year of construction: 2015, gebraucht 2015 7290 prompt, Zwischenverkauf v Türkei 21400 1 40 to 630 mm 450 mm 150 mm 5 - 75 mm 153 1/min 415 x 275 mm 68 mm 40 mm 230 mm 280 mm 4 kW 1300 mm 1700 mm 2150 mm 2950 kg 8-fold ram guide Clamping plate Light barrier protection 2-hand control panel and foot pedal Huv8yig Manual central lubrication User Manual in German with CE Declaration of Conformity

more

Listing

Strassberg

(dealership location)

6,847 km

Eccentric C-Frame press

W. Paul Müller ExP 160

Call

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 3 t HS straightener RME 40 - 9 - built in 2009 2 feed rollers 7 straightening rollers Extended machine accessories Nkse0bp The machine was converted to SIEMENS S7 in 2009.

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 60P Eccentric Press

Call

Condition: new, Year of construction: 2023, Fresan FP 60P - C Frame Eccentric Press - 60 Tons (600kN) TECHNICAL DATA: * Power: 60 tons (600kN) * Strokes Per minute: 65 * Ram-Table Distance: 365 mm * Stroke Adjustment: 0 - 100 mm Bcpz9gfuss0 * Ram Adjustment: 70 mm * Table Dimensions: 500 x 700 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces (6-slide version available, optional) * Mechanical fuse for overload protection * Pneumatic counterbalance cylinders * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Hessisch Lichtenau

6,811 km

KRUPP PEKRD 125 h

€16,000

Call

Condition: used, Year of construction: 1977, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Bc9wpa7z9d Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

more

Listing

Brandl

5,689 km

Weingarten 315 TONES

€97,000

Call

input power: 80 kW (108.77 PS), table width: 1,300 mm, table length: 2,500 mm, stroke adjustment: 200 mm, motor power: 35,000 W, total width: 3,500 cm, total length: 700 cm, pressing force: 315 t, Condition: used, Year of construction: 1964, Coil line with eccentric press Force 315 Tones Table dimensions 2500x1300 mm Dimensions Press 4600x2200x7000 mm Dimensions Press and coil 12000x3500x7000 mm Year of manufacture 1964 Adjustment Stroke 200 mm Stroke 400 mm Bhswhwxmrzd Modernization 2013 Power capacity 80 kW

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 15 P

€23,600

Eccentric Press 40 Tons - Single Column

Call

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 23600 483.8 15 to 1.4 mm 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 200 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Piypb welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 40P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400kN) TECHNICAL DATA: * Power: 40 tons (400kN) * Strokes Per minute: 125 * Ram-Table Distance: 320 mm * Stroke Adjustment: 0 - 84 mm * Ram Adjustment: 70 mm * Table Dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel Dk8co7 * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Hessisch Lichtenau

6,811 km

EBU 75 SKU

€6,800

Call

Condition: used, Year of construction: 1962, Single column eccentric press EBU type 75 SKU Machine No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat 300 mm table area 800 x 620 mm waste hole 325 x 225 mm ram area 470 x 180 mm Ngs7p clamping spigot bore Ø 40 mm table height above floor 845 mm stroke adjustment 16 - 140 mm ram adjustment 80 mm installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - pneumatic clutch-brake combination EBU - overload protection with breaking plate in ram - tool monitoring UNIDOR, type APS - mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds by means of 2 V-belt steps at the gear train - two-hand operation - simple work area shielding for swinging open - table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - control cabinet and control panel for tool monitoring adjacent - automatic central lubrication - 4 machine feet space requirement L x W x H 2600 x 2300 x 2450 mm weight approx. 5,5 ton. good condition

more

Listing

Brandl

5,689 km

Erfurt PE 45 C

€7,000

Call

total height: 1,350 cm, input power: 5.5 kW (7.48 PS), table width: 400 mm, table length: 700 mm, Condition: ready for operation (used), Year of construction: 2003, pressure:45 t Cnsoqfp99 total power requirement:5,5 kW Weight of the machine ca.: 3000 kg Dimensions of the machine ca.:1350 x 1200 x 2500 mm

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 60 P

€45,000

Eccentric Press 30 Tons - Single Column

Call

Condition: new, Year of construction: 2023, neu 2023 7300 prompt, Zwischenverkauf v Türkei 45000 913.5 1 60 to 3.5 mm 500 mm 700 mm 190 mm 1 - 100 mm 65 1/min 4 70 mm 45 mm 260 mm 365 mm 5,5 kW 1250 mm 1350 mm 2400 mm 3500 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination fully closed gearbox working in oil bath photocell light barriers mechanical overload protection two hand and foot pedal control H8msq9n manual adjustable stroke automatic central lubrication according to CE rules Options: vibrations pads 192,- bolster plate 930,- picture incl. optional available bolster plate

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 30P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 30P - C Frame Eccentric Press - 30 Tons (300kN) Bcpdhcxbyoq TECHNICAL DATA: * Power: 30 tons (300kN) * Strokes Per minute: 140 * Ram-Table Distance: 305 mm * Stroke Adjustment: 0 - 60 mm * Ram Adjustment: 60 mm * Table Dimensions: 400 x 600 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Hessisch Lichtenau

6,811 km

BURKARD - MABU 6 R

€3,800

Call

Condition: used, Year of construction: 1984, Single column eccentric press BURKARD - MABU type 6 R Machine No. 10508 Year of construction 1984 pressure force max. 3 ton. pressure force, 30° before BDC 3 ton. throat 115 mm table surface 400 x 210 mm ram surface 120 x 90 mm stroke adjustment 5 - 60 mm clamping spigot Ø 20 mm ram adjustment 30 mm Installation height max. 190 mm (with intermediate table plate) Stroke rate approx. 55 strokes/min.(single stroke) Eccentric shaft speed 12 to 55 rpm. motor power 1,5 kW mains connection 400 Volt, 50 Hz - mechanical rotary wedge clutch, electropneumatically operated - single stroke only no continuous operation (programming of the control system) - electric foot switch or two-hand operation via pushbutton for stroke release - flywheel speed infinitely variable via variator drive, manually adjustable - machine stand of a 6 ton machine, because of the low stroke rate the press force is given by the manufacturer with 3 tons Qbw937 - table intermediate plate 40 mm, table opening Ø 100 mm - piece counter - table base space requirement: L x W x H 1100 x 780 x 1600 mm weight 500 kg very good condition

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 100 P

€66,300

Eccentric Press 20 Tons - Single Column

Call

Condition: new, Year of construction: 2023, neu 2023 7296 prompt, Zwischenverkauf v Türkei 66300 1332.63 1 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Ekxrb97q Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads 192,00 bolster plate 2.580,00

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 20P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 20P - C Frame Eccentric Press - 20 Tons (200kN) TECHNICAL DATA: * Power: 20 tons (200kN) * Strokes Per minute: 160 * Ram-Table Distance: 240 mm * Stroke Adjustment: 0 - 50 mm * Ram Adjustment: 40 mm * Table Dimensions: 360 x 550 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame Lwo87q030 * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Hessisch Lichtenau

6,811 km

Single column - eccentric press - as new condition

MÜLLER GEFREES 60 SV DK

€19,500

Call

Condition: used, Year of construction: 1986, Single column eccentric press MÜLLER GEFREES type 60 SV DK (identical in construction ExP60) Machine No. 5250686 Year of construction 1986 As good as new condition pressure force 60 ton. Cjq3aiiusb throat 280 mm table surface 740 x 560 mm ram area 385 x 200 mm drop-through hole in table 300 x 200 mm table surface intermediate table plate 740 x 560 mm drop-through hole in table intermediate plate Ø 103 mm thickness of intermediate table top 70 mm clamping spigot hole 40 mm Table height above floor 815 mm (with intermediate table top) Installation height max. 275 (with intermediate table top) Installation height max. 345 (without intermediate table top) Stroke adjustment 10-90 mm Plunger adjustment 60 mm Stroke rate 100 strokes/min. Motor power 3 kW drive power 380 Volt, 50 Hz - mechanical rotary wedge clutch with pneumatic control - spring-loaded single-jaw brake controlled via cam disk - stroke release via pneumatic foot switch - overload protection with crushing plate in ram - table height adjustment via 2 threaded spindles - manual grease central lubrication BEKA Schmiertechnik - Operating instructions and pneumatic diagram available space requirement L x W x H 1400 x 1100 x 2200 mm weight 3,4 ton. very good condition, as new

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 160 P

€87,400

Eccentric Press 15 Tons - Single Column

Call

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 87400 1756.74 160 to 6 mm 750 mm 1100 mm 230 mm 1 - 172 mm 45 1/min 6 100 mm 80 mm 375 mm 540 mm 11 kW 1890 mm 1950 mm 3650 mm 15500 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Yz7fw Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 15P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 15P - C Frame Eccentric Press - 15 Tons (150kN) TECHNICAL DATA: * Power: 15 tons (150kN) * Strokes Per minute: 200 * Ram-Table Distance: 215 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 40 mm * Table Dimensions: 320 x 490 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) Bcmefjlk2j2 * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 20 P

€26,700

Eccentric Press 10 Tons - Single Column

Call

Condition: new, Year of construction: 2023, neu 2023 7275 prompt, Zwischenverkauf v Türkei 26700 542.01 1 20 to 1.7 mm 360 mm 550 mm 140 mm 1 - 50 mm Bwn0o2le 160 1/min 4 40 mm 35 mm 200 mm 240 mm 2,2 kW 1360 mm 1100 mm 1860 mm 1250 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules OPTION: Vibration pads 132,--

more

Listing

Küçükbalıklı, Muhittin Kırcal Sk. No:3, 16250 Osmangazi/Bursa, Türkiye

5,182 km

Fresan FP 10P Eccentric Press

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 23.12.XXXX, Fresan FP 10P - C Frame Eccentric Press - 10 Tons (100kN) TECHNICAL DATA: * Power: 10 tons (100kN) * Strokes Per minute: 200 * Ram-Table Distance: 190 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 35mm * Table Dimensions: 265 x 370 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces Bcmdpy7ozku * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 30 P

€30,800

Call

Condition: new, Year of construction: 2023, neu 2023 7285 prompt, Zwischenverkauf v Türkei 30800 625.24 1 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm 2050 mm 1670 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules Options: Bww08jpwhh vibrations pads 132,- bolster plate 720,- picture incl. optional available bolster plate

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

MC-50

€43,200

Call

Condition: used, Year of construction: 2019, gebraucht 2019 7191 prompt, Zwischenverkauf v Bww2k0bcqr Italien 43200 38900 1 50 to 3.5 mm 800 mm 450 mm 22 - 110 mm 60 - 100 1/min 70 mm 8 70 mm 235 mm 290 mm 5,5 kW 1330 mm 1000 mm 2650 mm 4500 kg MINT CONDITION, DEMO MACHINE - NEVER USED FOR PRODUCTIN (ACTUAL PRICE FOR NEW MACHINE: 66.500,--) with 8-fold ram guide fixed table semi-automatic stroke adjustment motorized ram adjustment Variable speed motor hydraulic overload protection dynamic braking platen automatic circulation lubrication safety light guard Keyence Antivibrationspads PEDAL COVER PLATE FOR HOLE IN THE TABLE user manual in GERMAN or ENGLISH Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

HESSE by FRESAN FP 10 P

€18,500