Used Welding Equipment for sale (44,248)

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 Codo Ahpltopfx Aizori EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20245200040, arm reach: 1,300 mm, load capacity: 12 kg, type of cooling: water, This listing includes a complete package with a robot and welding equipment. No additional hardware or software is required to start automated welding immediately. The robot has been used in our company as an experimental and testing unit. To this end, the unit was mounted on a mobile cart + table + linear travel axis. Creds Ahm Hdspfx Aizji As a certified dealer (Cobot Welding Partner), we can provide comprehensive support for cobot welding, tailored to your needs. This includes installation, employee training, and part programming. The price and scope of delivery of the package can be adjusted upon request. Currently, the welding power source is fully equipped and includes all arc welding processes and material characteristics offered by Lorch. The welding software installed on the robot has basic features. This means that the welding power source is fully integrated into the teach panel via its bus system. This function is called "Cobotronic" and is explained in more detail on our website. All software functions can be offered and upgraded as needed. All functions are demonstrated and explained on our website. Scope of delivery: - Universal Robots UR10e (identical to UR12e) - Lorch pulse welding machine, S5-RoboMIG XT (fully equipped) - Lorch programming software "Cobotronic" (full integration of welding parameters into the robot panel's user interface) - Mounting plate for 16" and 28" welding tables - Torch holder mast incl. balancer for hose package - MIG - water-cooled hose package 3.5 meters, torch holder and torch neck - Ground cable The linear travel axis and welding table can be offered optionally and are not included in the current offer price.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Crsdpfx Aisyr H Anezji Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: new, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Year of manufacture: 2026 Cedpfx As Ahvv Neizeri Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 163 x 77 x 107 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2026, table length 2000 mm table width 1000 mm table height 900 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 2,0x 1,0 x 0,9 m Siegmund Welding Table with Steel Plate - Frame made of aluminum profiles - Working height: 900 mm - Perforated plate: high-quality S355J2+N steel, plasma-nitrided and BAR-coated Cedpfe Ahzh Ssx Aizori - Borehole diameter: 16 mm - Borehole grid: 50x50 mm - For clamping: manual clamping bolt 160514

Condition: used, mileage: 5,55,466 km, power: 353 kW (479.95 HP), first registration: 03/2012, fuel type: diesel, number of seats: 93, gearing type: automatic, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - DVD player - Air conditioning - Front refrigerator - Sleeper cabin - Toilet - Webasto auxiliary heater = Further information = Height: 400 cm Damage: none Credpjz Hbl Njfx Aizei = Company information = We are an international company based in Belgium, located in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a spacious parking lot used as a showroom. We always have a wide selection of buses from all brands, capacities, models, and at every price level in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to error, prior sale and typographical mistakes. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: excellent (used), functionality: fully functional, Rated power at 50% duty cycle: 25 kVA Max. welding power: 107 kVA Adjustable reach: 140–500 mm Welding specifications – Steel: 6 + 6 mm Brass: 3 + 3 mm Crodpfx Ae Ahw Upsizsi Aluminium: 1.2 + 1.2 mm Adjustable electrode force: 17–278 daN Cooling water flow rate: 4 l/min Weight: 240 kg Welding control unit: DALEX MPS 1036 Operating instructions and electrical diagrams are available Working stroke triggered by pneumatic foot pedal Well-maintained condition

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Cedpfxjzizr Re Aizeri Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Welding positioner, Deuma, 1500 kg load capacity very robust Welding current transmission 600 A Disc diameter 1100 mm Height when tilted to center 900 mm Height in horizontal position 1100 mm Crsdpfxszvvcko Aizoi Length 1500 mm Width 1000 mm Speed continuously adjustable, approximately 0.1 - 1.2 rpm Tilt continuously adjustable up to approximately 120° with hand and foot remote control

Condition: new, functionality: fully functional, power: 197 kW (267.85 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: Cedpfx Aez E Rg Toizeri -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2023, functionality: fully functional, total height: 550 mm, total width: 300 mm, total length: 680 mm, input voltage: 400 V, ground cable length: 3 mm, overall weight: 36 kg, type of cooling: air, welding current at 100% duty cycle: 280 A, input current: 320 A, welding current (min.): 10 A, welding current (max.): 320 A, input frequency: 60 Hz, Equipment: head guard, The GYS NEOPULSE 320 C is a professional digital three-phase welding power source designed for high-performance MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA welding. Welding current: 10–320 A Power supply: 3 × 400 V AC, 50/60 Hz, ±15% Maximum input current: 26 A Effective input current: 22 A MIG/MAG duty cycle: 320 A 40%, 300 A 60%, 280 A 100% TIG DC duty cycle: 320 A 40%, 300 A 60%, 280 A 100% MMA duty cycle: 320 A 40%, 300 A 60%, 280 A 100% Csdpfxez H Uize Aizsri Open-circuit voltage: 85 V Wire feed speed: 1–22 m/min Protection class: IP23 Insulation class: Class A Cooling: Air-cooled power source; compatible with an optional water-cooling unit for water-cooled torches Processes: MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA Manufacturer: GYS S.A.S., France The NEOPULSE 320 C is equipped with digital synergic control, allowing for precise adjustment of welding parameters and providing stable, high-quality welding performance. It is suitable for welding mild steel, stainless steel, aluminum, and other alloys in professional and industrial applications.

Condition: ready for operation (used), Year of construction: 2021, arm reach: 2,010 mm, total width: 4,000 mm, load capacity: 10 kg, overall weight: 8,000 kg, product length (max.): 5,200 mm, number of axes: 6, Welding robot manufactured in 2021. This Yaskawa Robotic Welding Cell RWC L1_OS 15330 features a robust configuration with multiple Yaskawa Motoman robots and advanced welding equipment. It includes a maximum reach of 2,010 mm and a payload capacity of 10 kg. If you are looking to get high-quality welding capabilities, consider the Yaskawa Robotic Welding Cell RWC L1_OS 15330 we have for sale. Contact us for further details. • Power supply: 400 V / 50 Hz • Rated power: 70 kVA • Main fuses: 3 × 100 A • Compressed air supply: 6 bar Additional equipment • Robots: • 2× Yaskawa Motoman MA2010 (6 axes; max. reach 2,010 mm; payload 10 kg; repeatability ±0.08 mm) • 2× Yaskawa Motoman MA1440 (6 axes; max. reach 1,440 mm; payload 6 kg; repeatability ±0.08 mm) • Robot controller: • Yaskawa DX200 multi-robot controller • Positioner: • Yaskawa RWV2-M2-1500-2500-1850 (max. payload 1,500 kg; distance between mounting plates 2,500 mm; swing diameter 1,850 mm; 3 external robot axes; weight approx. 3,400 kg) Csdpfxjz N Hrbs Aizsri • Welding equipment: • 4× Fronius TPS400i welding power sources • 4× Fronius WF 25i wire feeders • 4× Fronius CU 1400 cooling units • 4× Fronius welding torches • 3× Abicor Binzel automatic torch cleaning units • 3× Q-Set automatic torch calibration systems

Condition: used, Year of construction: 2011, functionality: fully functional, type of cooling: water, Kemppi FastMig pulse 350 MXF 65 welding machines, manufactured in 2011, are for sale. We also have equipment from other manufacturers available. Cedpfx Aie Adrqwjzsri If you have any questions or require additional information, please send us a message or call us.

Condition: like new (used), functionality: fully functional, power: 81 kW (110.13 HP), fuel type: diesel, color: other, operating hours: 210 h, We offer this like-new Claas AXOS winter service vehicle for sale: Tractor: Claas Axos 330, 110 hp, 210 operating hours, Revershift transmission, Annovi PUV2800 snowplow, 295/240 cm wide, Gambarini 750l Inox salt spreader, 5 operating hours, Claas weight 650 kg, 2 chains, vehicle in like-new condition. If you have any questions or require further information, please feel free to send us a message or call us. Credpfx Ao Adtmmeizei [Italian text included for reference, not to be translated]

Condition: excellent (used), functionality: fully functional, The Mogensen Sizer SEL 2046 vibrating screen is a compact, high-efficiency, and high-capacity screen designed primarily for the classification and separation of bulk materials and powders. Effective screening width: 2.0 meters Number of screening decks: 4 inclined decks, allowing for up to 5 separate fractions of material in a single pass. Csdpfx Ae Adun Seizsri Ideal separation range: Primarily designed for fractionating materials with particle sizes ranging from 0.1 mm to 30 mm. Maximum size of incoming material: Accepts coarse particles up to approximately 50 mm.

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: yellow, first registration: 06/2023, Equipment: cabin, trailer coupling, = Additional Options and Accessories = - 2-pedal control - Rear work lights - Front work lights - Windshield - Enclosed cab - Radio/CD player - Hose assemblies - Telescopic forks - Automatic preheating system - Immobilizer = Notes = Very nice Caterpillar CAT 906 wheel loader from 2023 with only 356 operating hours. The machine comes from Germany and is in very good condition both technically and visually. The wheel loader has been well maintained and has very few operating hours. The CAT 906 is equipped with a multi-purpose bucket and is supplied with a pallet fork. This makes the machine versatile and suitable for various applications, such as in the construction industry, in agriculture, and in industry. Technical data and equipment: Manufacturer: Caterpillar Model: CAT 906 Year of manufacture: 2023 Operating hours: 356 Multi-purpose bucket Pallet fork included Tires in good condition Technically in very good condition Visually very well maintained Well maintained Credpfx Aio Ad I A Ajzei German machine A very nice and relatively new wheel loader with few operating hours. The machine is in good technical condition and is ready for immediate use. Inspection and test run possible by appointment. Additional pictures and videos are available upon request. Worldwide export and transport can be arranged upon request. = Further Information = General information Year of construction: 2023 Model year: 2023 Operating hours: 356 Serial number: CAT00906THZ600918 Weights Unladen weight: 5,500 kg GVWR: 5,500 kg Functional Quick coupler system: Yes CE marking: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact Gerrit Haverhoek for further information.

Condition: used, total power requirement:6,5 kW Credpfo Ad Siyox Aizei dimensions of the machine ca.:0,9 x 0,5 x 1,25 m

Condition: ready for operation (used), Year of construction: 1992, Suction capacity: 1200 m³/h Maximum static pressure: 1350 Pa Electrical connection: 380 V, 0.75 kW Credpfoz Eq Ttex Aizei Space requirement: 700 x 660 x 1030 mm Weight:

Condition: ready for operation (used), Year of construction: 1999, Suction capacity: 1000 m³/h Maximum static pressure: 2700 Pa Electrical connection: 400 V, 1.5 kW Space requirement: 855 x 655 x 1475 mm Weight: 200 kg Csdpoz Eq T Tofx Aizeri

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. Codpozic Elefx Aizsri - only 5 working days of operation, perfect conditions- warranty until Jan. 2027- Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack

Condition: excellent (used), functionality: fully functional, load capacity: 3,500 kg, 3-axis ESAB welding positioner, 3500 kg load capacity in very good condition Crjdpfxjzk Rbde Aizoi complete with accessories, including foot and hand-held remote control Clamping plate diameter 1100 mm

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit Cedpfx Aozk Rdxeizjri PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: used, Year of construction: 2007, functionality: fully functional, IDEA SMP 120 Band saw blades weld grinding machine for deburring burr after welding with pneumatic holder of strip. Grind blades width up to 120 mm. Made in Germany. Crodpfx Aiez Hl Axozji

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Codpjz Hvl Rsfx Aizjri Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Year of construction: 2007, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, length of welding knife: 1,000 mm, welding current at 100% duty cycle: 32 A, welding power (max.): 21 kVA, width of welding knife: 10 mm, machine/vehicle number: 1400, Equipment: type plate available, High frequency suspended welding machine, 12KW, double adjustable electrode 10x1000mm. Csds Abcmqopfx Aizeri Revised according to current EC legislation, plexiglass protection, 12 months warranty