Used Blast Cabinet for sale (4,121)

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle surface cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time you need for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in the automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotary basket and lined with stainless steel. Different blasting nozzles and an ionization system ensure reproducible results. A basket with a soft, replaceable liner protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. Thanks to the user-centered design, everything is easily accessible and safe to use. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Pgedezgr T Tjpfx Alhjn Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 1998, condition: good (used), Offer 26141 Technical specifications: - Negative pressure cabin with viewing window - Work area size: approx. W 530 x H 400 x D 450 mm - Front door that folds upwards, with access openings for operation - Blast chamber accessible by hand for operating the blasting gun - Viewing window: 280 x 180 mm - Abrasive recovery system - Pressure reducer with water separator - Foot pedal - Base frame: W 900 x H 600 x D 900 mm - Drive: 400 V / 0.55 kW - Space requirement: approx. W 900 x H 1800 x D 900 mm - Weight: approx. 200 kg Psdpfx Alozgchbohjgn

Condition: used, functionality: fully functional, machine/vehicle number: GE6, Guyson GE6 Mid-sized, industrial manual blast cabinet with dust extraction unit. Suitable for precision surface preparation, cleaning, deburring, and cosmetic finishing of manufactured components using compressed air and abrasive media (such as glass beads or aluminum oxide). Full working order. Pgjdpfozguqhex Alhen Estimated around 10-15 years old. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Pgedoxr Awaspfx Alhsn Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Condition: new, Technical specifications: • Chamber volume: 1600 liters • Power supply: 230V ~ / 50Hz • Nominal operating pressure: up to 10 bar • Cleaning performance: up to 23 m2/h • Cleaning grade: SA-2.0 (deep and extensive corrosion) • Air consumption: 500 l/min (for 4.0 mm nozzle) • Maximum air flow: up to 2,300 l/min • Supported nozzle diameters: from 4 to 10 mm • Abrasive valve: 2 x vacuum BRAGO • Gun: Vacuum CTR x 2 • Dimensions of the work area: 1500 x 1340 x 720 mm • Sight glass dimensions: 305 x 610 mm • Work table load: up to 600 kg • Lighting: LED, adjustable within a range of +/- 90 degrees (two parts) • Coating protection: Powder coating • Operating temperature: 10 to +50 degrees Celsius • Shared work table: Yes • Inspection valve: Yes • Weight: 720 kg The offer includes: • Land Reko SCI-1600-10 chamber cleaner Podpfx Alsft Sqxehjgn • Transport trolley • Turntable • Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) • Protective leather gloves • Holder for hanging parts • Foot control pedal x 2 • Pneumatic connection • CE declaration of conformity • User manual in German • 24 months warranty for consumers • 24 months warranty for businesses

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity - L = 3000mm W = 1500mm H = 500mm - Load capacity: 5t Psdsyyxa Nspfx Alhjgn - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift - Rotary table available as an option

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Pjdswc Nrnopfx Alhsgn Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Dimensions of the blasting cabin approx.: - 1.40 m wide - 1.65 m high Pgjdpfxswtyd Ae Alhen - 1.00 m deep Dimensions of the extraction unit approx.: - 0.7 m wide - 2.60 m high - 0.8 m deep

Condition: new, Bernardo SB 4 Sandblasting Cabinet Work area dimensions: 1110 x 820 x 810 mm Air consumption: 680 l/min Required air pressure: 8.6 bar Hopper capacity: 148 liters Psdpfed Tb Uzsx Alhegn Sleeve opening: 180 mm Air connection: 3/8" Weight approx. 160 kg

Condition: new, Year of construction: 2025, Shot blasting booth DSK 20.10.09 with trolley and rotary table. Pgedpfx Aofnh Rvjlhen Width: 2050mm, Depth: 935mm, Height: 955mm Lift-up door with pneumatic system, offering the advantage that the blasting media falls into the booth when the door is opened, rather than onto the floor. If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts.

Condition: new, Year of construction: 2025, Pressure blast cabinet DSK 15.15.20.RB75, with or without a roller conveyor. Blast chamber dimensions: width (B) = 1150 mm, depth (T) = 1150 mm, height (H) = 930 mm. 1 TÜV-certified pressure vessel, 20 liters, with a conical discharge funnel. 1 abrasive metering valve with pneumatic control for adjusting the abrasive flow rate. 1 integrated closing cone with guide tube. 1 compressed air connection with pneumatic shut-off valve and branch for control air. 1 pressure regulator for adjusting the blasting pressure. 1 blast hose, DN19. 1 handpiece with boron carbide blasting nozzle, Venturi 8 mm. 1 pair of blasting gloves. Dust extraction filter, 2000 m³/h, 2.2 kW. Pgjdpfx Aoga I R Eolhjn

Condition: new, Year of construction: 2025, Abrasive blasting cabinet DSK 1102 S with trolley and rotary table. Width: 1500mm, Depth: 1235mm, Height: 995mm Lift-up door, pneumatic. Podpjdhl Ngofx Alhsgn If you have any questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contact persons.

Condition: ready for operation (used), HGH 6040 DUO Sandblasting Cabinet Manufacturer: HGH Podeyba Ayjpfx Alhegn Model: 60 40 DUO External dimensions: approx. 1300mm x 720mm x 1350mm (W x D x H) Working area: 590mm x 400mm x 250mm (W x D x H) | 590mm x 400mm x 250mm (W x D x H) Weight: approx. 120 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the article description are possible and remain reserved.

Condition: good (used), Storage location number: 3109 Pgsdpfxezaavws Alhon Manufacturer: Econoline Machine number: Type/Model: 101698G-A Table surface: 1,000 x 1,000 mm Internal height: 800 mm Accessories/Equipment: Dust extraction system LEESON 0.3 kW Condition: good Dimensions: 1,100 x 1,400 x 2,000 mm Weight: 230 kg

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. Pedpfxewf Dwwo Alhsgn ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: used, Year of construction: 2019, We offer a pressure blasting cabinet with complete accessories. Inner cabin width: 1500 mm. Year of manufacture: 2019. Fan power: 1.1 kW. Elevator power: 1.5 kW. Screw conveyor power: 0.75 kW. Cabin lighting: 2 x 50W. Automatic filter with shaker: 0.8 kW. The equipment is fully functional and in excellent condition. Psdpfxoyz Iths Alhegn

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Cooled Podpfxsrbzygs Alhogn Power regulator Load supervision on analog outputs

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Poded Sm Diopfx Alhsgn Max temperature: 700 C °

Condition: used, Year of construction: 1994, machine/vehicle number: 3155.00.00.105, total width: 1,450 mm, total length: 1,650 mm, total height: 1,950 mm, air demand: 1.1 m³/h, input voltage: 400 V, overall weight: 950 kg, Equipment: cabin, Cabin dimensions 1250 x 1000 x 950 mm Pgedpey Shgiefx Alhen The Ventus 125 S blast cabinet with suction feed is specially designed for production applications where high production capacity is required in combination with optimal abrasive quality.

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Pjdpfjpmtb Rex Alhjgn

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Pgsdpfx Alsupx E Uehen

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Good working condition. Please check out our other listings as well. Pgodpfx Aloupx E Iohen

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm Psdpob A Iuksfx Alhjgn -Drawer heights: 260 mm -Weight: 216 kg

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request! Psdpfx Alshvmkijhogn

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Pgjdpfxoxhfr Eo Alhsn Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.