Used Winder for sale (539)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 Ihjdpfew Ryt Dsx Adwst - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: used, Year of construction: 1996, functionality: fully functional, Triple extrusion line Technical details: Documented notes: The line has been modernized several times since its commissioning. Component arrangement according to diagram: • Head • Cylinder • Gearbox Ihjdox Itgaspfx Adwst • Motors • Steel frame • Triplex extruder configuration • Control system with Beckhoff interface • Operator screens for displaying extrusion parameters • Winder units designated as “Wickler” • Emergency stop button available • Industrial control cabinets installed

Condition: ready for operation (used), Year of construction: 1991, A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible. Iedpsxl Un Rofx Adwjht

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. Ijdpfoh Uuhcsx Adwjht - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Condition: good (used), Code: 0266 Brand: ROBOPAC Model: ROTOPLAT 106/FRD - CE Standard Stretch wrapping machine with rotary table for wrapping pallets, boxes, cabinets and various materials various materials, various sectors such as food, beverages, detergents, chemicals, construction, furniture, logistics and various With loading ramp Rotating table diameter mm 1650 Film tension adjustment Load capacity 2000 kg Rotating plate diameter mm 1650 Clutched reel carriage FRG Table rotation speed rpm 5/12 Height mm 2100 Ascent/descent cycle Ascent/descent cycle only Power supply volt 220/50 Iedpfex H Tprsx Adwjht Total power Kw 1,4 Overall dimensions: mm 1650 x 2600 x2700 h Weight kg 450

Condition: used, Year of construction: 2003, functionality: fully functional, Specification of Glue Coating Machine for Self-Adhesive Materials Technology: Silicone + Hot Melt Glue + Face Materials Maximum Web Width: 250 mm Glue Station (new): VALCO Melton FM-8 Glue application capacity: 8 kg/hour Glue Application Heads (2 pcs): L = 330–150 mm L = 200–100 mm Base Machine Focus F-250, equipped with: 4-color printing units Slitting station Lamination station 2 die-cutting stations Unwinder Rewinder Web Tension Control Three automatic tension control stations with electromagnetic clutches and load-cell tension control systems: Iedpfx Asx I Awuodwjht PIGITRACK – Magpower PIGITRACK – Magpower Micro Control Electric ST 200 W Web Edge Control (WEB Control) Two stations: Manual Slitting Knives Slitting knives for different widths from 250 mm to 100 mm – 60 pcs

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Ihjdpfx Adsvbcbujwjt Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Year of construction: 2016, functionality: fully functional, mileage: 17,500 km, 1. General Description Machine Name: QUADRUPLEX EXTRUDER No. 1 REF No.: FU-FPs 647 2. Functional Scope and System Components The overview presents the complete production line in conjunction with the quadruplex extruder, including material conveying systems, belt guidance, belt scanning, acceleration zones, cross-cutting, and cassette winding stations. 2.1 Main Assemblies - Extruder head - Multiple "swings" (pivoting arms), numbered 0 to 13 - Strip scanning systems ("Scan 1", "Tri Scan", Strip detection 1–4) - Cross-cutting unit ("cross-cutter") - Cutting machine - "Cutting table" - Conveyor belts labeled BELT 1, BELT 2, BELT 3 Winding Section: - Cassette winders 1–4 - Winding stations labeled "Winder 1–4" Note: Winders 1 and 2 marked "out of service" - Cooling water tank - Cooler - Electrical peripheral equipment, TCU units (temperature control units), control cabinets ("control cabinet", "ctrl.cab.") - Steel platform structures ("platform", cooling section platform) 3. Operating Parameters 3.1 Production Speed 0–30 m/min (specified production speed range) 3.2 Acceleration Section (Acceleration Speed Q1) From the provided calculations: - Basic production speed: 30 m/min = 0.5 m/s - Rocker cycle time: 4 sec - Belt shifting cycle time: 4 sec - Gap length: 2 m - Acceleration length: 8 m - Acceleration time: 16 sec - Speed difference: 2 m/s = 7.5 m/min - Resulting acceleration speed: 37.5 m/min 4. Strip (Material) Specifications Isdpfxex Irz No Adwsht 4.1 Strip Dimensions - Strip width: 20 mm – 220 mm - Strip thickness: 1.5 mm – 16 mm - Strip temperature: 10 °C – 45 °C - Strip weight: 0.02 kg/m – 2 kg/m 4.2 Strip Lengths Along the Line (Exact lengths between defined mechanical and sensor points) - Extruder head → Swing 0: 3,997 mm - Swing 0 → Swing 1: 10,279 mm - Swing 1 → Strip detection 1: 14,400 mm - Strip detection 1 → Strip detection 2: 39,159 mm - Strip detection 2 → Strip detection 3: 1,812 mm - Strip detection 3 → Strip detection 4: 27,702 mm - Strip detection 4 → Cross-cutter: 22,032 mm - Cross-cutter → Transfer belt pos. 10: 13,956 mm Other splitting and merging sections: - From splitting point pos. 10.1 → Rocker pos. 5: 17,545 mm - From splitting point pos. 10.2 → Rocker pos. 5: 17,542 mm - From merging point pos. 10 → Belt splitting point pos. 1–4: 17,827 mm Final travel lengths to winding stations: Belt position To cassette station – belt end Position 1: 6,050 mm Position 2: 9,072 mm Position 3: 12,376 mm Position 4: 15,393 mm To Spool Core (inner core) Position 1: 6,844 mm Position 2: 10,004 mm Position 3: 13,346 mm Position 4: 16,325 mm 5. Installed and Referenced Equipment The document lists an extensive chain of equipment references from which the quadrup­lex extruder line is "derived" or which it "includes", for example: - FU-FPs 648 – Cassette winders - FU-FPs 649 – Conveyor modifications - FU-FPs 650 – Extruder modifications - Older equipment from Berstorff (1995–1996) - Triplex winding equipment - Steel structural foundations (2005, 2019) - Conveyor control desks (Erhardt + Leimer, 2019) - Axelent safety fence - Various construction and civil engineering modifications (2018–2019)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Ihjdsx Uym Hopfx Adwot Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: new, functionality: fully functional, machine/vehicle number: Flowpack, Year of construction: 2023, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Ihedpfxsq Ikfme Adwet Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, Ihedpfx Aef Uc Ursdwjt with cooling bath, puller and winder with guiding device

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder Ijdpfx Asx Ifc Todwsht -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg

Condition: excellent (used), functionality: fully functional, 5 color roll offset printer with UV, Muller Martini Progress 520 with autocolor system- digital remote inking system, glue unit ESS, diecutting unit ESS, process unit, folder, rewinder and unwinder, glue dryer Straytfeild. The diecutter is magnetic. IST UV drying system in units, water cooled. Chilled rollers in every printing unit. Reserve UV lamps, plate puncher and serial tools. Inserts 24" with 3 pieces of 16" 4/6 inserts. Ihodpjx Rt Agjfx Adwot Available immediately.

Condition: used, Year of construction: 2014, efi Vutek GS 3250 LXpro LED Print width: 3.2 m Colors: 8C + White Resolution: 12pl-1000dpi Iedpfsx R U Evex Adwoht Production speed: up to 224 m²/h Roll option: 2 tables efi Fiery server Optional: heavy-duty unwinder

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Iodpfju D Ariex Adwsht Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: new, functionality: fully functional, machine/vehicle number: V1 01HUNG60KET9ESGRBMSZ601W, Year of construction: 2023, ! short delivery time, under 10 weeks ! !! We are happy to advise you !! Model name: Rotection Box-Motion U Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as desired Film feed ////: from below Form shoulder ////: flexible and fixed Operator display ////: 10" touchscreen with memory functions, swiveling through extension arm for comfortable operator handling Drives & control ////: 9 servo motors and PLC control Packaging length ////: 200-600 mm Packaging width ////: max. 250 mm (depending on film width) Packaging height ////: max. 120 mm (depending on forming shoulder) Speed ////: 10-60 bags/min. Film width ////: max. 600 mm Ihedpfx Aeq Ikgyodwjt Consumption ////: approx. 9 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 1500 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: 304 stainless steel Print mark sensor ////: Yes External compressed air required ////: Yes Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Features: • Box motion end seal • Steel frame / stainless steel construction • Splice function, dependent on material and speed • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stopping for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • rotating cross-welding system • can be combined with upstream and downstream machines • customer-specific changes / designs on request Additional options (on request and for an additional charge): • thermal transfer printer e.g. best-before date, print width up to 60mm • stainless steel finish / varnishing • cooling applications for ice cream packaging • zig-zag knife, euro hole stamp etc. • applications for shrink films (flow shrink) • gassing units for protective atmosphere (extend product shelf life) • automatic product feed systems, cyclical insertion systems • perforation units (tear thread) for easy opening • length-dependent product processing through photocell query

Year of construction: 2026, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide Ihedpfx Adech Sfqswot MADE in GERMANY

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 97300080, Used Slitting & Rewinding Machine – Kampf Universal 5 (U5) Manufacturer: Kampf Maschinenfabrik, Germany Year of Manufacture: 1989 Serial No.: 97300080 Working web width: 13200 mm Maximum speed: 600 m/min Working speed: 200–450 m/min Web type: Roll-fed Purpose: Longitudinal slitting and rewinding Materials: BOPP, PET, PE, PP/CPP, paper, foil, laminates Unwind section: Single unwind station Max. unwind diameter: 1000 mm Max. roll weight: 600 kg Core diameters: 76 mm (3”) / 150 mm (6”) Clamping system: Cone chucks Tension control: Electronic, DC drive Braking system: Mechanical or pneumatic Slitting system: Razor blades and rotary shear knives Minimum slit width: 25–50 mm Knife positions: 10–20 Bottom shaft: Steel, ground Top knives: Pressure-adjustable Trim removal: Aspiration system Rewind section: Duplex rewinding (two-shaft) Max. rewind diameter: 800 mm Max. roll weight: 150–250 kg Shaft type: Cone chucks or air shafts Supported cores: 76 mm (3”), adapters available Winding quality: Uniform, controlled tension Drives: DC Siemens SIMOREG 6RA21 Power supply: 380–400 V / 50 Hz Ijdpfxjx Hgkio Adwjht Total power: 20–45 kW Machine length: 4.5–5.5 m Machine width: 2.2–3.0 m Machine height: 1.8–2.2 m Machine weight: 3500–5000 kg

Condition: excellent (used), LAMINATING LINE, also for panels with ‘J’, ‘U’, ‘L’ profile and 45° angles. Minimum/maximum panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: decorative paper > 40 g/m2 - 120 g/m2 or PP, PET, PVC Iedpfowd Tcajx Adwoht PUR glue (with NORDSON premelter) Consisting of: 01) "ESSEDUE" double station bridge Loader 02)"‘BUFTERING" caibrating-sanding machine Mod. SWT 955 03) Motorised roller conveyor ‘HOMAG’ Mod. TVL 100 04) Cleaning-sweeping machine ‘WANDRES’. 05) Gluing system with 2 pre-melters ‘NORDSON’ for PU glue 06) Machine ‘HOMAG’ Mod. KFK 200 with: - Double glue spreader - Coil unwinder - Calender (rollers press) - Side folding and pressing zone for excess material - Panel side trimming zone 07) Cross Cut machine "HOMAG" 08) "ESSEDUE" double station bridge Unloader

Condition: used, Year of construction: 2015, functionality: fully functional, COMPLETE BOTTLING LINE WINE 9,000 BPH Speed: 9,000 BPH with cork stopper; 9,500 BPH with aluminum screw cap Ape depalletizer Model: Depal 2010 Year: 2015 Speed: 60 layers/hour Automatic operation Type of operation: by layer Workable pallet dimensions: 1200 mm x 800 mm; 1200mm x 1000mm Automatic layer removal system Pallet warehouse MBF triblock Model: Synchrofill 1440.40F1/1440.40LV/360.6R/360.5V Year: 2015 Directions: Counterclockwise Rinser Single treatment 40 clamps Electric height adjustment Fixed nozzle Type of treatment: water Fillers 40 valves Electric tank height adjustment Filling type: light vacuum Mechanical valve Valve functions: gas injection before filling, automatic level adjustment system by operator's panel Corker 6 heads for natural straight corks. Cork size: minimum height 34 mm; maximum height 54 mm Electric head height adjustment Ihodpfx Ajwditzjdwst Vacuum system, gas injection and 2nd vacuum before capping Corker 5 heads for aluminum screw cap Electric head height adjustment Gas injection system before capping General triblock data Bottle diameters supported: minimum Ø 55 mm; maximum Ø 100 mm Minimum height: 180 mm; maximum height: 360 mm OMAR drying tunnel Model: Asco 4 Year: 2015 Air blade drying system Robino & Galandrino capsuling machine Model: Poker z 6/12 Year: 2019 Electric head adjustment 6 thermal heads 12 rolling heads Long range storage Cavagnino & Gatti labeling machine Model: cg-cll-12-3xpsh-cf-6-mp Year: 2015 Rotary Clockwise Electric adjustment heads 12 plates Electronic cam 3 adhesive stations No. 2 vertical unwinders Label presence control Additional ironing of outgoing bottles Bee carton erector Model: Form 3000 Year: 2015 Closure by hot glue (Nordson) Carton dimensions: • Minimum length: 130 mm; maximum: 470 mm • Minimum width: 130 mm; maximum: 380 mm • Minimum height: 280 mm; maximum: 600 mm Carton storage capacity: 250 (depending on the thickness of the carton) Bee case packer Model: Inca 2010 Year: 2015 Carton formats: 3x2, 4x3, 6x4 Carton dimensions: • Length: minimum 200 mm; maximum 420 mm • Width: minimum 130 mm; maximum 380 mm • Height (with open carton): minimum 250 mm; maximum 590 mm Nr. 1 adjustable head for 3x2 and 4x3 boxes (min and max bottle sizes Ø 62-108 H 200-400) Nr. 1 fixed head for 4x3 and 6x4 boxes for 187 ml Ø 52.2 bottles Bee cartoon closer Model: CH 2010 HM Year: 2015 Closure by hot glue (Nordson)

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Iedpfxexmiqis Adwoht

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic Isdpfxei Exp Eo Adwsht -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Iederwxz Repfx Adwsht Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm Ihedeitdikepfx Adwjt -Weight: 829 kg

Condition: good (used), Double reel, reel, unwind reel, motorized reel for sheet metal processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, sheet metal unwinder -Manufacturer: OBRU, height-adjustable reel with drive -Diameter/Width: adjustable, see photos -Dimensions: 750/730/H1130 mm Isdpfx Adshfavuoweht -Weight: 114 kg