Used Unwinder for sale (382)

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Bodpfxszw Uile Abtsdg Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor Bodpfozx Ri Djx Abtodg This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm Bdjdpfozkhbnsx Abtjg - Weight, approx. 200 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 200 h, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 365 mm, operating speed: 54 mm/s, Equipment: CE marking, documentation/manual, safety light barrier, Almost unused machine. Includes a Coil Tech unwinder. 4. Technical Specifications Bjdpozw Rpzefx Abtsdg Maximum pressing force t 60 Table-ram distance mm 365 Ram stroke mm 4 - 102 Number of strokes per minute 54 Die opening diameter mm 40 Ram overhang (from the center of the ram) mm 245 Ram adjustment mm 95 Ram surface dimension mm 425 x 250 Table dimension mm 750 x 500 Table opening dimension mm 170 Supporting table strength with T-slot mm 70 Distance between frame side members in the working area mm 430 Distance between anchor bolts (depth) mm 900 Distance between anchor bolts (width) mm 695 Machine dimensions: height mm 2270 depth mm 1850 width mm 1100 Weight kg 3640 Motor power kW 7.5 Motor speed rpm 1450 Direct sale to the end-user only.

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. Bdodpfxjryu Tao Abteg 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. 4) Documentation.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, input voltage: 1,200 V, Industrial paper rewinder and cutter KAMPF (KAMPF GmbH & Co., manufacturer Jagenberg-Gruppe, Germany) Technical data: • Manufacturer: KAMPF GmbH & Co., Maschinenfabrik, Wiehl (Germany) • Group: Jagenberg-Gruppe • Year of manufacture: 1989 • Serial number: 9791D • Machine type: industrial paper roll rewinder and cutter • Power supply: 3 × 400 V • Machine location: Papir – Novak s.r.o., Czech Republic Use of the machine: The machine is designed for rewinding and longitudinal cutting of roll materials, in particular: • paper, • kraft paper, • wrapping paper, • technical papers, • other similar strip materials. Machine components: • unwinding stand for the parent roll, • main rewinding and cutting unit, • guide and transport rollers, • winding shafts, • protective cover for the cutting section, • control panel, • mechanical tensioning using an Ortlinghaus clutch. Machine condition: • mechanically complete, • the machine was dismantled from operation and stored in a dry warehouse for a long time, • the unwinding stand is included, • the control panel is installed, • functionality has not been verified – the machine is untested, • it is sold in its current condition, Bsdpeztwuvsfx Abtjdg • suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS KOENIG & BAUER FLEXOTECNICA EVO XDN8 Flexographic printing press with a central cylinder Gearless 8 colors Maximum printing width: 1000 mm Maximum material width: 1050 mm Minimum/maximum print repeat: 330/750 mm Fully automatic turret unwinder and rewinder Maximum coil diameter: 1000 mm Gas drying system BST 100% camera system Viscometers Bdjdpfxozx Tuij Abtsg FIFE web guide Year 2019

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Bsdsziwxtspfx Abtedg Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Good condition, ready for immediate use

Condition: used, Year of construction: 2006, functionality: fully functional, mandrel diameter: 76 mm, roll diameter: 1,250 mm, product width (max.): 2,000 mm, Web width 2000 mm Unwinding diameter 70 / 76 Parent roll diameter 1250 mm Weight of parent roll 2000 kg Rewinding diameter 76 Maximum roll weight 400 kg Minimum core length 40 mm Number of spindles 2 Speed up to 600 m/min Power consumption 70 kW Material PE / PP, 13-300 µm Bsdpfezvx Uvox Abtsdg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Bdjdszuzimspfx Abtog Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 41000137, number of ink cartridges: 7, color channels: 7, • One-Shot Color, • Gigabit LAN, • In-Line densitometer • Scroll rollers • Enhanced Productivity Mode (EPM) • 5th unit with OFIR (On-Press Fast Ink Replacement), Bodpszp U U Eofx Abtodg • 6th and 7th color units • Unwinder/Rewinder, Flex-pack-arm, Simplex-duplex re-insertion • In-Line priming unit (ILP) + 1 normal roller + 1 wine roller • Web guide ILP unit • DP680 upgrade kit HP SmartStream Labels & Packaging for HP Indigo WS6000, Powered by ESKO V5.2.3 • HP SmartStream IN100 Labels and Packaging Server, Powered by EskoArtwork • HP SmartStream Labels & Packaging Color Kit, Powered by EskoArtwork More information: 1. The press is still in production. 2. The press has an HP service contract for spare parts, a service contract, and technical support with an official HP certified representative. 3. The press is available for visit and inspection at the production site until August 25, 2026. 4. On August 26-27, 2026, the press will be cleaned, disassembled, and palletized by the technical service team and stored in the warehouses of an international transport company in Athens. More photos and videos are also available!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying – 6 drying units. Compressed air: 7/8 bar. Maximum web width: 270mm Minimum web width: 150mm Maximum feed length: 220mm Bdjdpeyr R Sgefx Abtjg Minimum feed length: 50mm Maximum printing width: 260mm Maximum printing length: 305mm Maximum length of the semi-rotary cutting die: 220mm Maximum permissible unwind roll size: 3000m Unwind roll diameter: 800mm Rewind waste roll diameter: 450m Rewind roll diameter on the automatic splicer (AS): 360m Maximum speed: 10,000 impressions/hour The machine is currently in production. An inspection can be arranged by appointment. Details are available in the PDF file. For further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Operating voltage: 400 V Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor Bodpfjzvcxlox Abtodg with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: excellent (used), Year of construction: 2011, The electricity and gas operated system enables surface treatment of plastic films by flame treatment. Field of application: e.g. Reverse foils in the solar industry MAIN COMPONENTS Bdsdpfx Asvydy Nsbtsg • PSA turning roll and turret winder 2200/12 PSA W / ARW 2200/12 - Fyling Splice • Hill/Jungwirth burner unit for gas/air mixture • Suction • Erhardt + Leimer web edge control • Detect the OCS camera system for the error • Semket labeling system to identify the errors • GWK temperature control units for roller cooling SKL SP HC300 330KW

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Bodpfxjywl D Nj Abtsdg Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts Bdodpfxszu Ryhj Abteg • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Year of construction: 2007, condition: reconditioned (used), We have available a complete Mueller Apparatebau unwinder, cutter, merger and folding module to fold A4 documents. 6802 - Unwinder 6948 - Reading module - s/n 54977 used 6612 - CF Cutter - s/n 59028 used 6950 - Merger - s/n 61778 used 6895 - Accumulator - s/n 58225 used 6626 - Folder up-up - s/n 58903 used 6822 - Folder STOPP function s/n 58617 used 6896 - Transport module - s/n 55747 used Bdedpfx Absinifhjtog 6815 - Transport module STOPP function - s/n 55728 used We do have other Mueller Apparatebau modules available. Let us know what you are looking for!

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Bdodozv Ukgopfx Abtjg Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source Bdedpfszuyg Rex Abtog The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: good (used), Year of construction: 2016, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 1087-1210063, Printing solution: Xeikon QA-P toner Working resolution: Digital frontend Xeikon X-800 with toner optimization module Finishing solution: Unwinder, WFM, high-capacity stacker, Kern end processing solution Year of manufacture: 2016 Bedpsx Ap Rhofx Abtedg If interested, we are happy to provide further information or video material. Disassembly was carried out by the Xeikon representative.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. Bsdpfx Abovmdw Istjdg The textile printing machine is currently still in operation and can be viewed at any time by appointment. The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. Bdodpfszuuimex Abteg The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Year of construction: 2014, condition: refurbished (used), Now available: Mueller Apparatebau unwinder 6802C available. Completely refurbed and like new. Direct available for your production. Bedpfxshd Nxvs Abtodg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, operating hours: 3,963 h, For sale: a machine for bending and cutting reinforcing steel. Manufacturer: STEMA/PEDAX Model: Twinmaster 16x+ Year of manufacture: 2007 Operating hours: 3963 The machine has undergone a complete overhaul by a professional service provider. Included with the machine: - Straight bar table (6 meters long) - 2 unwinders Additional unwinders can be purchased – 4 units available – 5,000 euros/unit. Bjdpfjzpx T Sex Abtedg

Condition: excellent (used), LAMINATING LINE for panels (particleboards, MDF, HDF) Minimum/maximum panel dimensions: mm 600-1550 (width) x mm 1854-3660 (length) Minimum/maximum panel thickness: PB/MDF mm 8 - 44 (standard mm 16-19-22) // HDF mm 2,5 - 8 Adjustable working speed: m/min 8 - 29 Minimum/maximum working cycle (Feeder and Stacker): 6 cycles/min - 10 cycles/min 01) "KONTRA" Loading station (with stack chain conveyor, 2 Lifting platforms, Feeding station) 02) "KONTRA" Roller conveyor with length guide rail 03) "KONTRA" 1 Vacuum transporter + 1 Stack chain conveyor for protection boards 04) HYMMEN LAMINATING SYSTEM a. "HYMMEN" Mod. FRB (Cleaning Machine) b. "HYMMEN" Mod. GLK-V (Smoothing Calender to uniform the workpieces surface) Bdedpjzxrgwefx Abtog c. "HYMMEN" Mod. TLA (Glue spreading machine) d. "HYMMEN" Mod. TRC (Conveyor) e. "HYMMEN" Mod. ADZ (Evaporation / Flashing-off Zone) f. "HYMMEN" Mod. KKL (Laminating Calender) g. "HYMMEN" Mod. DSS (Double-belt continous press) h. "HYMMEN" Mod. PWG (Pressing conveyoring rollers) i. "HYMMEN" Mod. FAA (Foil Unwinding Station) j. "HYMMEN" Mod. GLK (Final Calender) 05) "KONTRA" 1 Speed-up roller conveyor with length guide rails on both sides and pusher 06) "KONTRA" Unloading station 07) "KONTRA" 1 Protection board magazine