Used Window Dolly for sale (10,995)

Condition: used, machine/vehicle number: 1dad0ba418a93eaeb83d187cb, empty load weight: 2,000 kg, maximum load weight: 11,400 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 285/70 r19,5, Year of construction: 2018, Further information Welded fine-grained steel construction, fifth wheel coupling, make of our choice for 2 kingpins, with ball bearing slewing ring, max. 20° stop, lockable, support on drawbar, wheel chocks with holder, steel underride guard, quarter-shell mudguards in front of and behind axle unit, with tarpaulin cover when empty CLG under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle Cgedpji Riyaofx Abcen BPW disc brake axles with 370 mm disc diameter, air suspension with lift & lower valve 2-line compressed air brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connecting lines to the tractor unit2 non-interchangeable coupling heads to the trailer, incl. connecting helix EBS made by Wabco, electronic brake system, with Can-Router, with EBS plug at the front, with connecting cableEBS connecting cable to the trailer, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection for trucks via EBS, without truck instal. 24 volt, 4 x 3 chamber lights + 1 round rear fog light, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck1 x 15-pin socket, with connecting spiral to the semi-trailer, cable for reversing camera system with socket, additional LED work light(s) at the rear, switched via reversing light Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Saddle height approx.: 950 mm

Condition: new, machine/vehicle number: a0a72d14f9b44bce47bc25ffb, axle configuration: 1 axle, tire size: 11,5/80-15,3 alliance, Further information 40 mm towing eye Cgsdpfoi Ri D Tjx Abcsn Support leg with roller Tires: 11.5/80-15.3 Alliance without suspension Drawbar eye to center of saddle plate: 3200 mm Tire load capacity 5800kg at 30km/h + 5,150kg at 40km/h Without road approval, for internal use only!

Condition: new, machine/vehicle number: 04c37f0f66a5be61de6ecd7f2, axle configuration: 1 axle, tire size: 11,5/80-15,3, Further information 40 mm drawbar eye Codpfxei Riyhe Abcjgn Saddle plate: Jost Saddle height approx. 1000 mm Support foot: OMS Tires: 11.5/80-15.3 Alliance without suspension Load capacity tires 5800kg at 30km/h + 5.150kg at 40km/h Without road approval, for internal use only!

Condition: used, machine/vehicle number: 266c1faf254aacf5bd0b3713c, empty load weight: 2,400 kg, maximum load weight: 11,000 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 03/2014, tire size: 285/70 r19,5, Year of construction: 2014, Further information Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2\ kingpin with ball bearing slewing ring, stop max. 20°, telescopic support foot, 2 wheel chocks with holder, steel underride guard, half-shell mudguards CLG under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle. BPW disc brake axles, air suspension with lift & lower valve 2-line compressed air brake system, spring-loaded parking brake, Duomatic front coupling head, with connecting lines to the tractor unit2 interchangeable coupling heads to the trailer EBS, electronic braking system with EBS plug at the front, with connecting cable, Can RouterEBS connecting cable to the trailer, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection for trucks via EBS, without truck instal. Cedpfei Rizmsx Abcegn 24 volt, multi-chamber LED lights, amber LED lighting at the sides, 2 white LED position lights at the front 2 white/red rear lane departure warning lights in LED, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin plug with connecting cable to the trailer, cable routing for camera system Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Saddle height approx.: 1150 mm

Condition: used, Year of construction: 1988, functionality: fully functional, Window manufacturing machine Manufacturer: Okoma Model: UF1 S Cgedpoybbfpefx Abcen Year of manufacture: 1988 with tool

Condition: used, Year of construction: 2013, functionality: fully functional, Graf Synergy SL4-FF 4028 Extended dimension 4000x2800mm Weight 2700 Csdpoyg Ruwjfx Abcjgn Vaccum cleaner In working condition, can be seen at work. Barcode Reader Veka Profiles

Condition: good (used), Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg Cgedeb A S U Ropfx Abcen

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Model: Graf SL4-FF EVO Year of production: 2018 Working direction: right fixed head Maximum weld size: 2800 x 2800 Minimum weld size: officially 380 x 400 (in practice 330 x 350) R0908Mbt3N Standard mirror dimensions W = 58 - 130 mm H = 40 - 130 mm Receiving table and extractor included (original GRAF). Number of cycles worked 88524 as of 05.11.2024 Machine used on one shift, It was practically unused for a long time, Cgedpsvzp Nrefx Abcsn Blue robot, the only one of its kind in the world, made to order!

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Cgjdpfx Aox H Al Njbcjn Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: good (used), Window rubber, cutting machine, seal cutter -Hitches: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg Cgjdpfx Aeb A Ncgobcon

Condition: used, axle configuration: 2 axles, first registration: 04/2019, total length: 6,160 mm, total width: 2,550 mm, total height: 1,200 mm, tire size: 385/55R22.5, tire condition: 70 %, color: black, Year of construction: 2019, Reference size: 385/55R22.5 Tire tread: 70% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Unladen weight: 3,350 kg Payload: 14,650 kg Gross vehicle weight: 18,000 kg Body manufacturer: Krone Damages: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today’s requirements, and comply with our industry’s high standards. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands Cgsdpfx Aox Tfbmobcsn - Telephone: - E-Mail: - Website:

Condition: used, functionality: fully functional, VERTICAL CLAMP FOR WINDOWS ITALPRESSE Cgedpfx Ajx Rrp Eobcsn

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Cgodpfx Abox Suzaecon Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template We have a stock of >100 axles. Cgsdpfjwx Ixlex Abcon Please contact us if you can't find what you are looking for.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a UC Matic 15 window production line as well as a Powermat 500 from Weinig, comprising the following main components: - Infeed mechanization - CNC machining center Unirex 2000 - CNC end processing unit Unitec 15 - CNC longitudinal profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer - Powermat 500 with mechanization The line is configured as an integrated production system for window and profile processing, enabling efficient and flexible manufacturing. Cgjdsx Sqxhepfx Abcon

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: Cgedpfx Abowcxb Sjcjn U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: new, axle configuration: 2 axles, Dolly 20 tons - sprung - from 1 mtr. High dimensions + tires and axles as desired Cedpfxex S H Ace Abcogn State: New

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm Codpsb A Rg Sefx Abcegn -1x pallet tool -different sizes -Weight including pallet: 346 kg

Condition: used, machine/vehicle number: WFDFLT21301009183, axle configuration: 2 axles, first registration: 12/2019, color: other, Year of construction: 2019, Please contact us for more information. Cgodex Sdaxspfx Abcen

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Codpfx Asx Nqqxsbcjgn Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. Cgodpfxex Npzcj Abcen The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press Codexmr Spjpfx Abcegn The machine is complete and fully operational Working range 3000 x 2000 mm

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Cgedpfx Aboxmr Rxjcen Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing Cjdpfxoxwdv Io Abcjgn > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Cgodpjxytpcjfx Abcen Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.