Used Window Patching for sale (11,274)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Located: Europe Western Current State: In production Available: Immediately More pictures and video is available. PRICE under request. Rsdpfx Aeyzyhwsbpjcf

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Redpfx Abjzul T Nopecf Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Rcjdpfx Ajzul Utebpsf Control cabinet Freestanding transformer 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Redjzul Tvopfx Abpscf Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 123-2001, functionality: fully functional, planing width: 260 mm, rotational speed (max.): 6,000 rpm, number of spindles: 5, planing height: 120 mm, roller diameter: 140 mm, TECHNICAL DETAILS Maximum planing width: 260 mm Maximum planing height: 120 mm Infeed table length: 2,470 mm Number of spindles: 5 Spindle 1 Spindle type: Horizontal spindle Motor power: 5.5 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 150 mm Spindle 2 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 3 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 5 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Feed and extraction Diameter of feed rollers: 140 mm Feed motor: 2.2 kW Diameter of extraction nozzle: 140 mm Feed drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Electrical data Voltage: 380 V Current draw: 84 A Rcedezuwrkspfx Abpof Fuses: 100 A Total power: 39 kW Dimensions & Weight Dimensions (L × W × H): 4,000 × 1,700 × 1,650 mm Dry weight: 2,500 kg Shipping packages: 1 EQUIPMENT Tools for all spindles included Documentation

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Rcedpfx Abozu Akrepsf Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: used, Year of construction: 1991, Manufacturer Kohmann offers the F-1050 K Window Patcher Machine, produced in 1991. This machine is currently operational in a printshop located in Deutschland. The price for this equipment is available upon request. Notable features include a format of 1020 x 1050 mm. Kohmann, established in 1962, is renowned for its high-quality carton converting machines, including window patching machines and folder gluers. The company has a strong reputation for producing reliable and efficient machinery for the printing and packaging industries1. The F-1050 model is known for its robust design and ease of operation, making it suitable for various window patching applications. It is designed to handle different sizes and types of carton blanks, ensuring precise and efficient window patching Rcedpfx Aoyb R Adebpsf Format: 1020 x 1050 mm

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! Rcjdpfx Abozt Si Ujpef For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Simultaneous machining via 2 handwheels

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: - Infeed mechanism Rcsdpfx Absx Sqxhopef - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 - CNC length profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 035-804, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, Year of construction: 1996, the latest tools were acquired in 2024. Production of wood and wood-aluminum windows. Oppold 67 mm wood and wood-aluminum. Zuani 79 mm wood and wood-aluminum. Zuani 91 mm wood and wood-aluminum. Also, production of entrance doors and lift-and-slide doors. The production line is still fully assembled and functional. Rcjdjzlytxspfx Abpef Also available for individual sale: UC 6 with Oppold IV 67 tool for 3,500 EUR. Zuani tools IV79 and IV 91 for 8,900 EUR. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2015, condition: good (used), Machine type: P 440 D Serial number: P122 0315 Year of manufacture: 2015 Maximum working width / format: – 17 inch (approx. 432 mm) Rcedpfx Ajycv Eajbpjf Certification: – CE compliant Machine configuration: – Feeder / infeed unit – Two gluing stations, suitable for window and corner window patching – Web guiding system with register and deflection units – Operator control panel – Delivery unit (stacking or winding configuration) Condition The machine is in very good technical condition. It was originally purchased as a backup unit and shows only minimal operating hours.

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. Rcedozu Avzepfx Abpjf The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Rcsdpfx Aexw Ux Hebpsf Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: like new (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 105-337, Machine for cleaning the corners of PVC profiles. Rjdpjzdqagofx Abpjcf

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm Rodpfjzm N Nrex Abpocf

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Rcsdjzm I Dhspfx Abpsf Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Rcodpfx Abjzlat Sepsf Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) Rodpozdk Hysfx Abpscf ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Ref Code:1027 Prisma 600 Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Rcedpfx Abozlaucepjf Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Rcedey U Tczepfx Abpsf Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Rcodpfezpyfcox Abpof

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 6080008264, In very good condition (almost perfect). Rcedjzdp Rwopfx Abpjf

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm Rcjdpfxozl D Dno Abpef • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 - digital length stop - digital angle display - roller conveyor - dust extraction Rcedpszm R U Nsfx Abpsf

Condition: used, Year of construction: 2013, functionality: fully functional, URBAN post milling cutter. Rcedpfx Abjzpyhkspjf