Used Wire Comb Binding Machine for sale (68,792)

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2011 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the water tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side only) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V Generator AGIEVISION 5 CNC control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and fully overhauled after receipt of your order. Dkodpfxox Sxa Ts Afpeh You will receive a 6-month warranty on all machine parts. Commissioning and training services are also available on request.

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Weight: 130kg Dkjdpfx Ajx Nc Aajfpjh Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 Dsdpfxem Amf Dj Afpskh travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Djdpfxsx Ncxhe Afpekh Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Dksdpfxjx Ncw Rs Afpeh Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: good (used), 4-station bookbinding press for gluing blocks Dsdsx Ncw Dopfx Afpskh MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Dkjdpfxsx Ncvms Afpjh Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air.

Condition: good (used), Offer consisting of: Müller Martini Tigra Year of production: 1999 Technical specification: - ZTM 1571 12 station gatherer + hand feeding station (1999) - Criss cross delivery - Hotmelt perfect binding line Tigra (1999) - Drying belts - Threeknife trimmer Esprit (2007 ) - Stacker Uno (2007) - Max. format: 370 x 285 mm - Min. format: 120 x 100 mm - Book thickness: 3 - 40 mm - No. of clamps: 9 - Production speed: 1000 - 3600 cycles/h Dksdsvlk U Depfx Afpsh

Condition: good (used), machine/vehicle number: 52513/5, Hunkeler RE320VAR register punch, in good condition, immediately available. We have two more machines in stock at our warehouse. Dedpfsrc Attjx Afpekh If you are interested, we would be happy to inform you about additional machines in our facility. You are welcome to inspect the machine at our premises by prior appointment.

Year of construction: 2016, operating hours: 4,439 h, condition: ready for operation (used), General Data Machine weight 4200 kg Control Unit Brand FANUC Model 31i-WB Dimensions Machine Length 2900 mm Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 800 mm Z-Axis Movement 310 mm Dsdpfx Ajx Nr N Ajfpjkh Y-Axis Movement 600 mm This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2008, functionality: fully functional, Handfeed station – 14 x feeder – book Block feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Dsdpjxtau Eefx Afpjkh Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Dedpfx Afou Ic Hnepokh Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m Dsdpfx Asvc Akljfpjkh WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible Dkedpfein Rn Aox Afpoh -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Dsdpoycwtfefx Afpokh

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: SC2-00252, total height: 1,270 mm, total length: 1,250 mm, total width: 1,980 mm, empty load weight: 350 kg, Connection: 230V/ 50Hz/ 15Amp. Compressed air supply: not included in delivery Serial number: GP2/ SC-2 - 252 Smallest tyre size: 170H x 219W mm Largest tyre size: 400H x 771W mm without angle direction Dkjdpfx Afew Tlp Njpeh

Condition: used, Year of construction: 2003, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, CNC wire EDM machine Fanuc, type Robocut Alpha O I B, year of manufacture 2003. Travel of XY axes: 320 x 220 mm. Travel of UV axes: plus/minus 60 mm. Z-axis adjustment: 180 mm. Clamping area: 530 x 360 mm. Maximum workpiece height: 180 mm. Internal space: 70 x 430 mm. Maximum workpiece weight: 500 kg. Dedpfx Aoyankpjfpokh

Condition: used, Year of construction: 2004, 1 wire EDM machine, manufacturer Mitsubishi, model FA 20, year 2004, with filtration unit, internal no. 13 Djdeyaw Sijpfx Afpjkh

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire EDM machine (2018), in excellent technical condition, continuously operated, fully functional, and ready for immediate use – very low operating hours (only 2,700 hours). Technical Specifications: - Year of manufacture: 2018 - Manufacturer: Mitsubishi Electric - Model: MV2400R - Control system: Mitsubishi M700 Series - Axis travel (X/Y/Z): 600 / 400 / 310 mm - Max. workpiece dimensions: 1050 × 800 × 295 mm - Max. workpiece weight: 1,500 kg - Worktable size: 840 × 700 mm - Wire diameter: 0.1 – 0.3 mm (0.25 mm currently in use) - Positioning accuracy: ±1 µm - Power supply & cooling: complete and fully functional - Machine dimensions (L×W×H): 2687 × 3030 × 2150 mm - Weight: approx. 3,500 kg Equipment and Accessories: - Original upper and lower wire guides - Automatic Wire Threading (AWT) - Filter tank with ion-exchange resin - Complete set of clamping and locating devices (in carrying case) - Wire alignment device - Original operation manuals and documentation Additional accessories purchased for over €10,000: - Wire guides for 30° angle cutting (upper and lower) - Processor battery - Precision workpiece clamping vise - 0-600 PSI pressure gauge (2 pcs) - MV power contact (259320) (2 pcs) - CF card with software - 0.25 mm EDM wire – 3 new spools - 2 sets of new filters - Machine transport and handling system Dedpfx Aoxu Hvlefpjkh Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Complete filtration and cooling systems included. We offer assistance with transport, installation, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price negotiable. VAT invoice available. Export (0% VAT) possible.

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Dsdpex Dit Ssfx Afpekh Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels Dkodpfx Aewwrk Nsfpoh * large dielectric capacity * ability for taper cutting * robust CNC control system.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Dkjdpfxowwq S So Afpjh Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), Dkodpfxowwrtwe Afpeh * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Dksdpfxowww Sxo Afpeh Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Dkodjx Ryr Ispfx Afpsh