Used Wire Drawing Machine for sale (65,576)

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. Dusdpjyubh Refx Aa Net They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Dodpfx Aer Nfvmoa Njut Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Dsdpfoy N Df Nsx Aa Njut

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm Dodjwi Tidjpfx Aa Nout speed -meters/sek: 15 m Location: Europe

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe Dujdpewi S Ixefx Aa Nst

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Cooling medium – matrix: Water Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Dujdpfewmnhvsx Aa Njt Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Dujdet Ixkzepfx Aa Nst Maximum Inlet Wire's Diameter: 30 mm

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Dodoymn Hwopfx Aa Nsut Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg Djdpfx Aaey I Uvce Njut General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min Djdpoy Nmxxjfx Aa Njut MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm Djdpoytkdrefx Aa Nsut WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm Dedpfx Aaeyry Tae Nout TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X-axis 500 mm Y-axis 350 mm Z-axis 300 mm U/V-axis 75 mm Max. workpiece dimensions 1,050 x 800 x 290 mm Max. table load 1,500 kg Duedpfx Aajyvr Tze Not Machine weight approx. 4,000 kg Machine is available immediately from stock.

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 Djdpfjw N D Sujx Aa Nsut line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Year of construction: 1987, condition: good (used), Technical Details : Input wire - 7.0 mm Dededzru Uspfx Aa Nout Out put - 1,8 mm Vertical and horizontal Coiler Motor power - 55 Kw/ Block

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Dsdsmqk Tpjpfx Aa Neut Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Djdpfx Aen Ut A Sja Njut Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control Travel paths (X / Y / Z): 550 x 350 x 400 mm Duodpfx Aajy Ifrhs Njt Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Machine dimensions (complete): 2600 x 2810 x 2240 mm Total machine weight: 3300 kg The machine is currently connected to power and can be inspected under power. On request, we offer the following services: - Commissioning of the machine at your site - Overhaul with 6 months warranty - Control system training - Accessories such as chiller and clamping devices

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.05 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Duedsy E Intjpfx Aa Njt Includes AGIEJOGGER hand control unit for convenient machine setup 15" LCD color display with lift keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic changeover between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg The machine has been cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your facility and provide training on the control system and machine operation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Machine FANUC alpha - O I C5 Travel ranges: X 320, Y 220, U 120, V 120, Z 255 automatic wire threading Duedpsy E In Tjfx Aa Nst good condition year of manufacture 2004

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Duodpfjy Ed Enjx Aa Njt Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: - Transport - Commissioning - Chiller - Clamping devices - Consumables

Year of construction: 1999, condition: ready for operation (used), A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Djdoy Nnawspfx Aa Nout

Condition: used, Year of construction: 1963, functionality: fully functional, machine/vehicle number: D06L/7457, Offer Number: D06L/7457 Dujdjwi S Rtspfx Aa Nst Machinetype: wire and strip bending machine Make: BIHLER Type: RM25 Constr. year: 1963 dia. range: 0,5-2,5 mm width of band: 50 mm feeding length: 170 mm number of slides: 5 punching power: 5 to output - pieces/min: 225 Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 220 mm Travel U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Operating hours: 28,500 h Machine weight: 2,700 kg Dujdpfxjy Emxqe Aa Njt

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation. Dujdpoy Ib Ewsfx Aa Not