Used Wood Boiler for sale (6,566)

Year of construction: 1991, condition: good (used), functionality: fully functional, Wood chip boiler. The boiler is an Ösby Parca model with a capacity of 3 MW, manufactured in 1991. A separate burner from Green Energy with a capacity of 2 MW, manufactured in 2019. It has 3 grate beds, 2 of which are movable. Includes a flue gas fan, an automation cabinet with a lambda sensor, and frequency-controlled fans. It supports high and low combustion modes, as well as a maintenance firing mode. Blodpfey T I Iijx Apreh

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Bodpfx Apoy Dfd Nsrslh suitable for dry material

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ Bedpfxexmrwfe Aprolh 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ Bledpfx Ajwakktjprjh TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification Bedpfx Aoxa Evbeprjlh - Output: 110 kW - Year of manufacture: 2010 - In operation since: 2010 - Fuel feeding: automatic, with screw conveyor

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Bjdpfoyf U R Hex Aprolh Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Bjdpfxeq Igyve Aprjlh Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Bljdpfxeyynq Rs Aprjh Min. cutting width: 20mm Chip box

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Bljdpfxepxnpaj Aprsh Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Bledpfx Asylw Saepreh Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm Bodpfxey Na Hvo Aprslh – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Bodpfxezagkzs Aprjlh Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: good (used), For sale is a professional, stationary, industrial-class Wood-Mizer LT300S band sawmill. This is a flagship, fully automated machine designed for mass, continuous production of lumber with minimal physical labor (the entire operation is handled by a single operator from a stationary station/cabin). The machine comes from the official Polish distribution network (manufactured in the Wood-Mizer Industries factory in Koło). The original nameplate is fully legible, guaranteeing the complete legality of the equipment and trouble-free selection of spare parts and manufacturer's service support. ⚙️ TECHNICAL DATA FROM THE NAMEPLATE: Manufacturer: Wood-Mizer Industries sp. z o.o., Koło, Poland Model / Type: LT300S Serial number: 032006 030 A4.03 Supply voltage: 400 V (Three-phase) Frequency: 50 Hz Full load current (FLA): 54 A Full load current of largest load (FLA of Largest Load): 39 A Short-circuit current (AIC): 35 kA Electrical diagram number: shlt300 💎 KEY FEATURES AND ADVANTAGES OF THE LT300S MODEL: Extreme Performance: "Heavy Duty" construction designed for multi-shift operation. It allows processing from 15 to even 24 m³ of logs per shift (depending on the type and dimensions of the wood). Thin-Kerf Technology: Thin, stable blades (standard width 38-44 mm) significantly reduce the amount of waste in the form of sawdust, resulting in a much higher yield of finished material from each log. Bledpsy Tzqdjfx Aprsh Full Industrial Hydraulics (High-Output): Machines in this series are equipped with a very fast and powerful hydraulic system: two-way chain log turner, advanced log clamping, and leveling rollers. PLC Automation (Setworks): The computer automatically calculates and positions the head to the appropriate cutting dimension with the highest repeatability, eliminating human error and reducing the time between successive saw passes. Board Return System: Integrated sweeping arms automatically remove the cut material during the head's return, so no additional worker is needed to operate the output line. 🪵 PROCESSING PARAMETERS: Maximum log diameter: approx. 91 - 95 cm Maximum cutting width (between rollers): approx. 73 cm Diameter of guide wheels: 600 mm (cast iron) Main engine power: 22 kW (provides a large power reserve for the hardest wood species or frozen logs) 🛠️ TECHNICAL CONDITION: The sawmill is in perfect working order, regularly serviced, and maintained to a high technical standard. Ready for immediate integration into the sawmill's production cycle without the need for any financial investment.

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Bodoyr I Dmopfx Aprjlh

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Bedpfeyr Dcljx Aprslh Weight 370 kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. Bljdpfsyr Dawsx Apreh • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Bljdpfx Apsyr Dfaorjh Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Blodpfx Aovzub Hspreh Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): Bsdpfx Aoyw I Hmjprelh • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: new, Year of construction: 2024, Wood crusher with cyclone filter, eletrical box, etc... The machines has a CE certificate. Bjw7wnlw3f0 Blsdpfx Apsxf Nwyorsh Quantity of cutting tip: 6 pieces Electric motor power: 30Kw Capacity: 800-1200Kg/hour Drive Type: V-Belt Feeder size: 150mmx150mm Located locally in (EU) Hungary

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Blodsyz Ia Iepfx Aprsh Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist.

Year of construction: 2019, condition: ready for operation (used), overall weight: 12,000 kg, total height: 4,500 mm, This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max pressure: 500 t (adjustable) • Filling height: 900 - 1300 mm • Max filling size: 1300 x 2500 mm • Press position: approx. 500 mm below floor level • Feeding table: 2000 x 1960 mm Bedpoyaqgmefx Aprjlh • Pick-up table: 2350 x 2500 mm • Capacity: 6 batches per hour • Ce marking Extra Information Machine still under power Dimensions Machine Depth 3600 mm

Condition: used, Year of construction: 1995, De Dietrich Industrial Boiler – Type GT 517 Manufacturer: De Dietrich (France) Model: GT 517 Year of manufacture: 1995 Technical data (from nameplate): Water capacity: 789 liters Heat output (Germany): 775–820 kW Oil/Gas input range: 845–900 kW Heat flow: 761–978 kW Maximum operating temperature: 120°C Blsdpeyntqwofx Apreh Maximum working pressure: 6 bar Voltage: 230V / 50 Hz Electrical power: 100 / 200 W Heat exchange surface: 28.46 m² Made in France Burner: Weishaupt gas burner Control: York International control panel (Gas burner 1) Condition / sale terms: Used unit, offered as-is, as seen

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 Blsdpfx Apstutwvorsh -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Bljdeun N Auepfx Apreh Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm