Used Wood Shaving Machine for sale (66,215)

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units - Belt speed: 25 m/s Hnjdpfxoymnz Ue Abcji - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Hnjdoycc Tdepfx Abcji Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges. Hsdpfxev Dvfrj Abcsni

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Hnedpev Dvhyjfx Abcsi Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Year of construction: 1966, functionality: fully functional, Equipment: documentation/manual, Good day, I have a Stanko 5A250 gear planing machine for bevel gears for sale. The machine is in very good technical condition and comes complete with all tool setting devices, etc. The price is 6,000 euros. Technical data: Maximum pitch circle diameter: - ratio 10:1: 500 mm Hjdpfxjxwp Nge Abconi - ratio 2:1: 450 mm - ratio 1:1: 350 mm Module: 1.5 - 8 Maximum tooth cutting length: 90 mm Number of gear teeth: 10 - 150 Number of tool speeds: 9 Stroke range of double knife movements: 75 - 472 min-1 Time required for machining one tooth: 8 - 123 sec Power: - main drive: 3 kW - hydraulics: 2.2 kW - cooling: 0.15 kW Machine dimensions: - length: 2200 mm - width: 1600 mm - height: 1800 mm Weight: 8,700 kg

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system. Hjdpfx Absv Nracjcjni

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 Hnjdpjx U A Nqefx Abcoi x

Condition: used, Year of construction: 1997, Control Heidenhain TNC 407 serial number 60/1997 x-travel 1.000 mm y-travel 600 mm z-travel 700 mm TISCHMAß: 1300 X 600 mm Hnodpjumyhrsfx Abcsi Werkzeugwechsler: 24- fac

Condition: used, Year of construction: 1999, Weight 3 to x-travel 750 mm milling-head swivable +/- ja Hjdpfx Abjw Sydrjcsni ja

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Hodpswm Rqajfx Abceni Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t Hsdoh Hrvfjpfx Abcjni +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1977, x-travel 700 mm Hjdpfoqh Ehtjx Abceni

Condition: used, Year of construction: 1990, Weight . kg Year . Hodpfx Aoud Tr Rebcsni content Rubintastkopf cbm

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm 110 Hodpfx Abjwzyt Teconi milling-head swivable +/- ja

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Hodpfx Abovwfiascsni

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Hnjdpju R Sxxefx Abcsi Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1999, functionality: fully functional, cutting length (max.): 1,800 mm, Equipment: CE marking, documentation/manual, PACKED WOOD SECTIONING MACHINE STORTI MOD. TGS P12 - Minimum pack length 1000 mm - Maximum pack length 5000 mm Hnedpfxsx Srtms Abcoi - Minimum pack width 300 mm - Maximum pack width 1200 mm - Minimum pack height 500 mm - Maximum pack height 1200 mm - Conveyor belt width 1250 mm - Feed speed 9.5 m/min - Drive motor 0.35 kW - Cutting bar length 1800 mm - Cutting bar feed speed 66 mm/min - Chain motor 14.5 kW - Number of programs 9 - CE rules - Year 1999

Condition: ready for operation (used), Perimeter tenoning machine BALESTRINI model TO 2 working fields, round/longitudinal tenons – independent processing, Hnsdpfswxrmtsx Abcji adjustment of tenon thickness and width, adjustable table angle setting.

Condition: excellent (used), Balestrini linear milling machine Hjdpfxjvt Ayne Abcsni Two milling units Milling height max 100mm Milling length max 1500mm Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Year of construction: 2002, condition: used, functionality: fully functional, Used HUNDEGGER K2-625 for sale. Hodpfxeycg Sqe Abcjni For sale: Hundegger K2 CNC machine with 4 axes, designed for machining wooden beams up to 13m, featuring 2 independent work clamps for sections up to 625mm x 300mm. Equipped with a circular saw unit (800mm), universal milling unit with finger bit and Milano cutter, interchangeable vertical milling unit, horizontal chain saw for groove cutting, vertical drill and hydraulic unit for beam turning. Comes with compressor unit (ELGI EN11-9.5 2022) and air dryer (MKE 155 09/2022), ready for installation and use. CE compliant. Machine is in fully operational condition. Sold with tooling and spare parts. Price upon request. Videos available upon request.

Condition: good (used), BACCI FC 8 2500 Linear Milling Machine Working length 2500mm Working width 200mm Hnsdpfxsv T I Dfj Abcji Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Grinding 3kw Grinding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE certificate Machine weight 5100kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control Hedpfxowhbgue Abceni The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Key advantages Perfect repeatability, even for large production runs Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy 0.0125mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, first registration: 07/1994, next inspection (TÜV): 05/2026, color: white, overall weight: 18,000 kg, front tire size: 255/70/22.5, empty load weight: 6,400 kg, axle configuration: 2 axles, suspension: air, loading space volume: 45 m³, tire size: 255/70/22.5, Equipment: ABS, lighting, Freudenau volume tipping trailer, 2-side tipper, left side with pendulum doors, right side fixed, approx. 45 m³, platform, sliding tarpaulin, SAF axles, 70% tires, German trailer from first owner. Sale only to business customers and with exclusion of any warranty. Loading possible. Hnodpfx Ajx Ncrhjbcji

Condition: used, SAGA HFVD45-SA 4.5 m³ wood vacuum drying chamber 3 phase, 380V, 50Hz-40KVA OUTPUT POWER: 30 kW TANK DIMENSIONS: 5700 * 2150 * 2000 mm STACKING SIZE: 4500*1000*1000 mm Hnedow Ac Hfspfx Abcsi Stacking capacity: 4.5 m³ INTERNAL DIAMETER: Φ1.7m Manual feeding, automatic feeding with motor HYDRAULIC PRESSURE: 3 tons (2 units) VACUUM PRESSURE: -0.093 MPa. Motor Power: 7.5 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: cabin, crane, Baljer & Zembrod OBX IV Hnedpfxev Tk I Ho Abcoi Reach 13.30m Load capacity 2500kg at 13.0m