Used Gear Shaving Machine for sale (70,140)

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Fpodpfjruahwsx Aa Esp Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW Fpodpfx Ajyud Tpea Esp weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, Cold Jet i³ MicroClean – Compact Dry Ice Blasting Machine For sale: a used Cold Jet i³ MicroClean dry ice blasting machine, built in 2018 and with only 47 operating hours. The machine is fully functional and in very good condition. The i³ MicroClean is designed for precision dry ice cleaning. The optional DX pellet-shaving upgrade allows the machine to work with loose 3 mm pellets and dry ice nuggets. It can also be used with dry ice blocks. Machine details - Manufacturer: Cold Jet - Model: i³ MicroClean - Year of manufacture: 2018 - Operating hours: 47 - Condition: Used, fully functional - DX pellet-shaving upgrade: Available for €2,000 - Dry ice capacity with DX: approximately 4 kg - Variable feed rate: 0–0.23 kg/min, depending on pellet or nugget size and condition - Air consumption: approximately 0.85–1.4 m³/min at 5.5 bar, depending on nozzle - Included: 20 ft blast hose, applicator, and nozzle - Warranty: 1 year Fedpfx Aaoydpy Tj Ejpp 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Cold Jet i³ MicroClean, Cold Jet i3 MicroClean, Cold Jet i³ MicroClean DX, Cold Jet MicroClean DX, Cold Jet dry ice blaster, dry ice blasting machine, dry ice blasting equipment, precision dry ice cleaning machine, compact dry ice blasting machine, dry ice pellet blaster, 3 mm dry ice pellet blaster, dry ice pellet-shaving machine, dry ice microparticle blasting machine, dry ice nugget blaster, industrial dry ice cleaning machine, low air consumption dry ice blaster, used Cold Jet machine, used dry ice blasting machine, dry ice cleaning equipment for sale.

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm Fjdpfx Aasv Nracs Ejpp turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system.

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 Fpsdpfeyud Tijx Aa Esp min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Fjdpfxoxwlths Aa Eopp Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: ready for operation (used), Year of construction: 1966, operating hours: 10,000 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, wheel width: 400 mm, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 740 mm, table diameter: 740 mm, total length: 4,500 mm, wheel diameter: 1,000 mm, gear diameter: 1,000 mm, total height: 2,450 mm, total width: 2,450 mm, input frequency: 50 Hz, workpiece diameter (max.): 1,000 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, table bore: 89 mm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 50 rpm, table load: 3,000 kg, helix angle: 45 °, Equipment: documentation/manual, rotational speed infinitely variable, Machine Description — Churchill U 3615 Gear Hobbing Machine The Churchill U 3615 is a heavy-duty gear hobbing machine designed for accurate and reliable cutting of spur and helical gears in industrial production environments. Built with a rigid cast-iron structure, the machine ensures excellent stability, low vibration, and consistent machining quality during continuous operation. The machine is capable of cutting gears with a maximum diameter of 1,000 mm without tailstock and 863.6 mm with tailstock, and supports workpieces weighing up to 3,000 kg. A maximum gear face width of 400 mm and a maximum module of 10 allow machining of medium to large-sized gears. The rotary table has a diameter of 740 mm, is equipped with six T-slots, and features a table bore of 89 mm, providing secure and precise workpiece clamping. The machine supports helical gear cutting up to ±45°, expanding its application range. The hobbing spindle accepts tools up to 180 mm in diameter and 240 mm in length. Spindle speed is infinitely variable from 50 to 200 rpm, allowing optimal cutting conditions for different materials and gear geometries. Feed movements are controlled via P.I.V. variable drives, offering smooth and precise adjustment of vertical, horizontal, and tangential feeds, as well as intermittent and continuous hob shifting. The machine is powered by a 7.5 kW main motor and operates on three-phase power at 50 Hz. With overall dimensions of approximately 4,500 × 2,450 × 2,450 mm (L × W × H) and a total weight of around 8,000 kg, the Churchill U 3615 is a solid and dependable solution for heavy-duty gear manufacturing. Manufactured in 1966, this machine is fully functional, ready for operation, and supplied with a full set of change gears, technical passport, and operator’s manual, making it well suited for workshops seeking a proven and durable gear hobbing solution. Fpedpfx Ajx Itfija Eep Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates -Reliable operation for continuous gear production

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Fjdpfx Aas Aapgzo Espp

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 40/10 23, workpiece weight (max.): 400 kg, helix angle: 45 °, table diameter: 500 mm, grinding spindle speed: 1,690 rpm, grinding spindle motor power: 8 W, overall weight: 5,500 kg, input frequency: 50 Hz, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, Equipment: documentation/manual, NILES ZSTZ 630 C1 ZP – Gear Grinding Machine Manufacturer: VEB Werkzeugmaschinenkombinat “7. Oktober”, Berlin, Germany (GDR) Model: ZSTZ 630 C1 ZP Machine type: Gear Grinding Machine Technical Specifications: Maximum gear diameter: 630 mm Maximum gear face width: 215 mm Gear module: 1–12 Number of teeth: 5–140 Maximum helix angle: 45° Worktable diameter: 500 mm Maximum workpiece weight: 400 kg Grinding stroke: 225 mm Grinding strokes: 75–315/min Grinding wheel diameter: 270–350 mm Grinding wheel speed: 1,690 rpm Connected power: 8 kW Operating voltage: 380 V / 50 Hz Machine weight: 5,300 kg Machine Description: Heavy-duty German gear grinding machine manufactured by VEB Werkzeugmaschinenkombinat “7. Oktober”, Berlin. Designed for precision grinding of external gear teeth. Fedpfxs Aitads Aa Eepp Location: Niš, Serbia Seller: Reparatur von Maschinen We specialize in buying and selling used metalworking machinery, with 25 years of experience and our own 1,500 m² warehouse. Additional photos, technical information, and inspection can be arranged upon request. Worldwide buyers are welcome. Loading and transport assistance available.

Condition: good (used), functionality: fully functional, Technical specifications: Manufacturer: Heidenreich & Harbeck Werkzeugmaschinenfabrik Hamburg Machine type: Spiral bevel gear hobbing machine “RAPID” Model: 15 KH Maximum pitch circle diameter: 150 mm (at a ratio of 1:1) / up to 210 mm (at a ratio of 1:7.5) Minimum pitch circle diameter: 10 mm Maximum module: 5 mm Maximum tooth length: 50 mm Maximum hob stroke: 60 mm Number of strokes per minute: 63–400 (in 7 steps) Fjdpj Aik Ilsfx Aa Ejpp Motor power: 3 HP (approx. 2.2 kW) Machine dimensions (footprint): 1,320 × 1,730 mm Condition: Mechanically well-maintained.

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Fpsdpfx Aaecrd Nmo Eep Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm

Condition: excellent (used), Year of construction: 1978, Gear hobbing machine WMW MODUL ZFWZ 2000/3 Max. diameter with tailstock: 1450mm Fsdpfx Aszt Iu Tja Espp Max. diameter without tailstock: 2100mm Max. module: 30

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Fpedsz Et E Eopfx Aa Eep Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (40°), total length: 6,100 mm, gear diameter: 180 mm, total height: 3,450 mm, total width: 2,975 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, tool diameter: 80 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. Fpsdpfjz Et Rzex Aa Eop The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 1,15,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. Fedpsz Etmpsfx Aa Espp The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 1,200 mm, position of the milling head: Schwenkbar (45°), table diameter: 1,200 mm, total length: 5,250 mm, gear diameter: 1,250 mm, total height: 4,420 mm, total width: 4,700 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 160 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,000 mm, overall weight: 22,000 kg, distance table to spindle center: 780 mm, tool diameter: 260 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A ZFWZ 10 module for large gears up to 1250 mm in diameter and module 22, which was completely overhauled in 2009 by SerWeMa and converted to a Siemens Sinumerik ONE with six CNC axes. The machine is in operational condition in our hall in Chemnitz: you can inspect it while it is running, we can mill your own sample part on request, and you can pick it up from us. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul, owns the module drawing archive, and knows the machine inside and out. The ZFWZ 10 is the classic Chemnitz gear hobbing machine for gearbox construction, crane and conveyor technology, mining, and heavy machinery construction: heavy cast iron bed, 1200 mm table, milling head with ±45° swivel range. It mills spur and helical gears up to module 16 in hobbing and up to module 22 in single indexing. With 1000 mm of axial travel between the cutter axis and the table surface, long shafts and large workpieces can be securely clamped. The Sinumerik ONE controls all six axes with an electronic gear train; the SerWeMa gear software guides you through workpiece and tool data via masks, without requiring programming. Fjdoz E Hy Aopfx Aa Eepp Technical data: max. workpiece diameter 800/1250 mm, table diameter 1200 mm, distance between cutter axis and table axis 80–780 mm, distance between cutter axis and table surface 350–1350 mm, max. module 16/22, max. cutter diameter 260 mm, max. cutter length 350 mm, tangential travel 250 mm, cutter speed 20–160 rpm, swivel angle ±45°. Installation dimensions approx. 5.25 × 4.7 × 4.42 m, weight approx. 22 t. Equipment: Siemens Sinumerik ONE control with six CNC axes, machine enclosure, magnetic chip conveyor, central and loss lubrication, hydraulic unit, coolant system, operating manual. We offer the conversion to Siemens Sinumerik ONE with Sinamics S120 and a new control cabinet, either before delivery or later at your plant – then with a guarantee on the new electrical equipment. Also optional: sample part milling in our plant, geometry acceptance according to DIN, installation and commissioning at your site, operator training. Spare parts and service are provided from a single source, worldwide, even after the purchase.

Condition: used, functionality: fully functional, LIEBHERR Gear Hobbing Machine - Max. Module 20 / Max. Diameter 1800mm The machine is in good operational condition and is complete with comprehensive peripheral equipment. It is sold including change gears (dişli takımları), hob arbors/mandrels (malafalar), and original technical manuals/documentation (kitaplar). • Available for immediate inspection under power. • Transport and dismantling can be arranged upon request. Technical Specifications • Manufacturer: LIEBHERR • Type of Machine: Vertical Gear Hobbing Machine • Max. Machinable Module: 20 mm • Max. Workpiece Diameter (with Counter Support/Steady Column): 1250 mm Fjdpfx Asz Ipadea Espp • Max. Workpiece Diameter (without Counter Support): 1800 mm • Workpiece Table Bore Diameter: 300 mm • Workpiece Bore Taper Diameter: 60 mm • Workpiece Table Taper: Morse Taper 10 (MK 10) • Max. Cutter (Hob) Diameter: • Standard Hobbing Head: 250 mm • Universal Hobbing Head (Type 2529): 300 mm • Tangential Hobbing Head (Slot Φ): 300 mm • Max. Cutter (Hob) Length: 340 mm • Hob Arbor Diameter Options (60-70-80): • Included Machine Accessory: 40 mm • On Request / Optional: 32 mm, 50 mm, 60 mm etc. • Cutter Spindle Taper: Morse Taper 10 (MK 10) • Center Distance between Cutter and Workpiece Axes: • Standard Hobbing Head: Min. 245 mm / Max. 1260 mm • Tangential Hobbing Head: Min. 185 mm / Max. 1200 mm • Universal Hobbing Head (Type 2529): Min. 160 mm / Max. 1175 mm • Machine Dimensions (LxWxH): 6500 x 3900 x 3300 mm

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Fpodpswvbqisfx Aa Esp Digital pressure controls Hydrostatic guide

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Fpodpfsz Et N Rjx Aa Eop Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Fsdpfxoz E Hx Ss Aa Ejpp Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: good (used), Year of construction: 1965, max. wheel diameter 900 mm max. module 6,5 stroke up to 150 mm table diameter 900 mm table hole 360 mm weight 3,7 t External: max. diameter 900 mm Max. gear width 150 mm Internal: Max. diameter 630 mm Max. gear width 150 mm Spindle bore table 360 mm Table diameter Ø 900 mm Module 6.5 mm Length 2500 mm Fpsdpjywnt Tsfx Aa Ejp Width 2300 mm Height 2600 mm Weight 4100 kg

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm Fsdpfx Aajvkpu Ho Eopp max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Fpsdozz Ilnopfx Aa Ejp Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Fjdpfxoxwlmue Aa Eopp Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Fpodpfx Ajz E Ra Hea Eop Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No