Used Woodworking Bandsaws for sale (12,597)

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. A device similar to the ProLoc system is used. Location: Nattheim. Chjdpfx Aswhqplslfed

Condition: used, Year of construction: 1999, Description of Hundegger K1-A Equipment: 1. Cross-sections: 20 x 60 to 300 x 450 mm 2. Infeed cross conveyor: 7 strands, 2.2 m 3. Undercutting miter saw 4. Universal milling machine - Roller cutter - Finger cutter 5. Combination support for vertically operating tools - 1 drilling unit - 1 finger milling machine 6. Combination support for horizontally operating tools - 1 drilling unit Chodps Ah Swwjfx Alfed - 1 slotting machine 7. Beam turning station, fully automatic Machine installation: 8. Substrate, foundation: - The base plate must have a thickness of at least 10 cm (with corresponding good reinforcement). - This should be level and suitable for anchoring. 9. Energy requirements, type, quality, quantity: 09.1 Electrical: - Voltage: 400/230 V, 3/N/PE - Fuse rating: 3 x 63 A - Frequency: 50 Hz - Peak demand: 15 kW - The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2 Compressed air: - Flow rate: V < 600 l/min - Pressure: Operating pressure p = 8.5 bar - Maximum permissible pressure p = 10 bar Important: The control system was updated by Hundegger from MIPPS to CAN in autumn 2020. Price ex works, location D-91154 Roth: 25,000.00 EUR

Condition: excellent (used), Catalog number: 7446 TECHNICAL DATA - track width: 340mm - roller width: 400mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm *from above: - pawls - sliding, metal pressure roller - pawls - sliding, metal pressure roller - saw arbour - sliding, metal pressure roller, 2 pcs *from below: - guide strip - sliding, metal roller - pawls - track - central lubrication - stepless feed speed adjustment, 1.5kW - main motor, 37kW - extraction nozzle diameter, 240mm - overall dimensions (L/W/H): 1900x1750x1980mm - weight approx. 3000kg ADVANTAGES - German-made - stepless speed adjustment Csdpfozrmtlex Alfshd - suitable for short workpieces - multi-blade saw, used, very good condition Net price: 79900 PLN Net price: 18581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Cjdpfx Ajxtwxbslfohd

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Chsdpfx Aloy Nkpusfjd Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Csdpfewkf Dvex Alfohd Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Leuco slotted discs or slotted cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: Chodpj Ahpwlefx Alfod - Blade: WP Z4 V4 - Flight circle (ø): 250 mm - Bore: 50 mm - Marking: MEC - Length: 8 mm - Material: Steel

Condition: used, Leuco slotted discs or slotted cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP Z4 V4 Chsdpo Ahpvcsfx Alfsd - Flight circle (ø): 250 mm - Bore: 50 mm - Marking: MEC - Length: 15 mm - Material: Steel

Year of construction: 2008, condition: used, Grinding machine Chsdpfxs Ahnpbs Alfjd Manufacturer: HS Maschinenbau Type: Year of manufacture: 2008 Technical data Grinding machine for brush handles and similar products (putty knives, trowels, etc.). Operating hours: approx. 50,100 h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Tangential ceramic wheel for tool & cutter grinders 175X8X20 Csdpfx Als Ahpl Tjfohd

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives for woodworking. Production from a straight blank or regrinding of used knives using a template. Includes a new grinding wheel and a new cooling lubricant pump. Cjdpfj Ahm Ixex Alfohd Technical data: - Clamping length: 230 mm - Mandrel ⌀: 40 mm

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Chsdpfxo Ahnkhs Alfjd Technical data: - Blade: HW - Flight circle (ø): 140 mm - Bore: 40 mm - Marking: MEC - Length: 55 mm - Material: Steel

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm from above: - infeed rollers, toothed, pulling, 6 pcs, including 2 double rollers - outfeed rollers, pulling, rubber, 2 pcs from below: - infeed roller, toothed, pulling, metal, twisted in the lower table + - outfeed roller, pulling, metal, smooth - rollers adjustable pneumatically - length of infeed table (with pneumatic feeder) 3390mm - possibility of operation without activating the pneumatic feeder, - table adjustable up/down - central lubrication - electric adjustment of planing thickness - stepless adjustment of feed rate Cedpfx Asztzmcjlfshd - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions (L/W/H) 7000x1950x1700mm, - weight approximately 3000kg – for wet and dry wood – pneumatic feeder on the infeed table, – used planer, very good condition Net price: 65900 PLN Net price: 15326 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper shaft 510mm - max. width of workpiece – lower shaft 450mm - max. thickness of workpiece, 2-sided 200mm – from above: - deflectors - 1 metal, toothed feed shaft - 2 metal, sequential feed shafts - 1 metal, toothed feed shaft - pressure roller - 510mm planing shaft, 4 knives, with the possibility of installing profile knives, approx. 7.5kW - pressure roller - smooth, metal feed shaft - upper pressure roller at the outlet, with 2 rubber feed rollers – from below: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing shaft, 4 knives, 7.5kW - 2 smooth, metal feed shafts – from the rear: - 2 side spindles 1) vertical right 200mm, 6.6kW 2) vertical left 200mm, 6.6kW - spindle diameter 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged in alternating positions - electric height adjustment - 2 types of feed speeds + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle 2x125mm, 145mm, 130mm - dimensions L/W/H 3200x1740x1650mm + control panel - weight 2100kg ADVANTAGES Chodpfx Ajzu R Thjlfod – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing shafts + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11372 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90119NTT 182902, overall weight: 20,000 kg, number of previous owners: 1, AUTOMATIC TANDEM PALLET PRODUCTION LINE: STORTI GSI 170-270 TA9 Cedpfxsz Hk Ndo Alfehd Industrial tandem hydraulic pallet nailing line by Storti S.p.A. (Italy). Model: Storti GSI 170-270 TA9. Year of manufacture: 2024. The equipment is in as-new condition with minimal running hours. Engineered for high-volume production of standard Euro pallets (EPAL / EUR) and customized wooden pallets. Technical Specifications & Components (Total Weight: Approx. 20,000 kg): * Storti GSI 170 TA9 (4,500 kg) – primary nailing machine (bottom part/skids assembly). * Storti GSI 270 TA9 (4,000 kg) – secondary nailing machine (top deck boards nailing). * Storti GSP 170 (1,150 kg) – automatic block & board feeder. * Storti GSM 3/6 (3,000 kg) – pallet chamfering & corner cutting unit. * Storti GA 90/180 (1,000 kg) – pallet turning / rotating device (90°/180°). * Storti AGS/237 (1,860 kg) – automatic hydraulic stacking system. * Storti C/5 (1,000 kg) – outfeed / transport chain conveyor. * Storti DAT 2008 (1,100 + 600 kg) – pallet branding / marking unit. * Control System: Main electrical display console Q1 + auxiliary control panels (Q2, Q3, Q4). * Safety: Complete set of original protective barriers and industrial heavy-duty cable ducts. * Serial number: 90119NTT 182902. Terms: * Location: Harghita, Romania. * Delivery: EXW / FCA.

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm Codpfx Aozu Sgpelfohd - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Connection data: Cedpszxr Uhjfx Alfehd 400 V, 50 Hz, 3-phase, N

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Chedpfo Ahgkdex Alfod Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Used Weinig Rondamat 960 PowerLock Grinding Machine | Rehomy Year of construction: 2009 WEINIG RONDAMAT 960 with Powerlock HSK Machine with following options: OP02 OPTIONSPAKET -2- COMFORT OPTIONSPAKET -8- HSK POWERLOCK TOOLING Chsde Ahyz Tjpfx Alfsd

Condition: good (used), Code: 0514 Brand: FMB - ITALY Model: BM 4/L - CE Standard Automatic edge bander for wood, Pvc, veneer, Abs, panels, joinery, furniture, bespoke furnishings, doors, kitchens and various other applications – CE Standard Technical data: Panel height 10–60 mm Max edge thickness 10 mm Min panel length 120 mm Min panel width 60 mm Glue tank capacity 2 kg Feed speed 14 mt/min Electric roller press lifting Composition: Gluing unit – Glue tank 2 kg – PVC shears End-trimming unit with 2 motors 0,5 Hp 12000 rpm – Cut inclination 0–5° Trimming unit with 2 motors 1,5 Hp 12000 rpm Bevelling unit with 2 motors 0,5 Hp 12000 rpm Space available for additional units Cede Ahytaopfx Alfshd Tilting sanding unit from –10° to +45° – Sanding is carried out using a straight or shaped pad which acts directly on the abrasive belt Oscillating belt Pneumatic belt tensioning Telescopic roller conveyor for supporting large panels Suction inlet diameters n°1 150 mm – n° 1 120 mm Compressed air 6 atm Overall dimensions mm 5900 x 1250 x 1700 h Weight kg 1700

Condition: excellent (used), CATALOG NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm - max blade diameter 300mm - blade bore diameter 80mm - min workpiece length 630mm - max workpiece width 600mm from above: - pneumatic pressure - pawls - pressure shaft, metal 2 pcs - pawls - blade shaft - smooth pressure shaft - pawls - smooth pressure shaft from below: - metal shaft, pulling, toothed 2 pcs - pawls - track - blade shaft - track - continuously variable feed speed adjustment via frequency inverter - main motors 2x55kW - feed motor 4kW - hydraulic body lifting up/down - hydraulic adjustment of blade shafts - pump motor 0.37kW - central lubrication - extraction nozzle diameter 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg ADVANTAGES - Made in Italy Chedpfx Aj Af Uw Njlfsd - Two-shaft - Multi-blade saw, used, very good condition Net price: 218900 PLN Net price: 50507 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - Track width: 300mm - Shaft width: 300mm - Max cutting height: 120mm - Max blade diameter: 350mm - Blade bore diameter: 70mm - Top: - 2 rows of pawls/ejectors - Smooth, sliding pressure shaft - Pawls/ejectors - Pressure pad - Shaft with saws - Pressure pad - Smooth, sliding pressure shaft - Bottom: - Guide rail - Pawls/ejectors - Track - 1 feed speed + variable - Main motor power: 22kW - Feed motor: 2kW - Central lubrication - Laser - Diameter of extraction nozzle: 250mm - Table dimensions (length/width): 2000x710mm - Dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Cjdpfx Ajzx U Iqolfohd Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 1997, Used Machine Year of Manufacture: 1997 Features and Technical Specifications: - Fitting drilling head Cjdpfx Alszk Nu Aofjhd - Drilling unit with 3/4 spindles - 2 clamping cylinders - Motor power: 0.8 kW - Power supply: 400/50 volts / Hz - Machine dimensions - Dimensions: 950 x 650 x 700 mm - Weight: 80 kg

Condition: used, Year of construction: 1994, pressing force: 60 t, table width: 1,250 mm, table length: 2,500 mm, ram plate width: 1,250 mm, ram plate length: 2,500 mm, distance table to ram: 350 mm, total length: 3,050 mm, total width: 1,550 mm, total height: 1,900 mm, overall weight: 3,200 kg, number of cylinders: 6, No. 04557 Veneer press Johann Frischling V 60 E Used, year of construction 1994 Type 250/125/6 Pressing area 2500 x 1250 mm Chjdo Ahz Awopfx Alfsd Total pressing force 60 t 6 hydraulic cylinders, bottom-mounted Scissor guide for even pressure distribution Daylight 350 mm Loading possible from all sides Electric heating plates ELKOM, gold anodised Top and bottom plates heated, 8.5 kW each Automatic temperature control via thermostats Electro-hydraulic unit with contact manometer Automatic pressure top-up, infinitely variable pressure adjustment Press timer with automatic opening, switchable to manual mode Push-button control for opening/closing Pressure chart on the machine for direct reading of the closing pressure Emergency stop pull cord all around, stops opening and closing Surrounding safety bar below the press table Mechanical inspection support Transport dimensions approx. 3050 x 1550 x 1900 mm LWH Weight approx. 3200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - Shaft width: 410mm - Bed length: 2220mm - Cast iron beds - Both beds are adjustable - Original cast iron guide - Motor: approximately 3kW Csdpfx Aszrlb Uelfohd - Dimensions (L/W/H): 2220x800x1140mm - Weight: 504kg ADVANTAGES – German-made – Used surface planer – Very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)