15
Serial No. 011
Capacity 820mm rounds, 1200mm x 820mm rectangular
Blade Size 9680mm x 1.6mm x 67mm
Twin Pillar Yes
Input 415/3/50hz
Speeds 15 - 90m/min
Vice opens 1200mm
Twin vices Yes
Stroke of feed vice 1000mm
Control Bomar
Fitted with Coolant
Equipment Hydraulic infeed tracking 2300mm x 1350mm, Out feed tracking 2000mm x 1350mm
Length 4500mm
Width 1400mm, with tracking 5700mm
Height 2700mm
Nett weight actual. 7,890 Kgs. / 7.76 Tons.
Gbvr02i2
grinder for wide bandsaws. CAUTION ! THE SIDE GRINDER ON THE VIDEO HAS ALLREADY BEEN SOLD
Ywxyzg0j
Grinder made by ISELI model SBT # 113939 with pusher at lef of the wheel , usefull for bandsaws on right hand turning headrig
grinding wheel diam 250, centralised height adjstment on saw support
for bandsaws up tot 8 " (206 mm) wide . Very precise grinding thanks to excentrcal movement in oilbath .
Complete with new frequency inverter on feed speed . Bearings renewed etc.
9
VOLLMER VRB / I straightening bench and VWM rolling machine in good condition
- Year of construction: 1990
Cupb722
- Band length: 8.5-11.5m
- bandwidth: max. 230mm
- bench length: 3m
- Bank width: 0.5m
- Feed speed: 9.5 / 15 m / min
- Number of rolls: 4
Works perfectly, video of the function can be sent
1
WIDE BANDSAWS BALDES IN COIL
Q3fetiyxk
6
Serial No. 08-80002
Capacity 380mm diameter or 615mm x 310mm rectangular
Input 415/3/50 AC 1.1 Kw
Swivel jaw frame 0-60 degrees
Swivel jaw vice Yes
Bkxk7byq7d
Vice opens 625mm
Fitted with Coolant
Length 8'4" / 2.54M
Width 4'8" / 1.42M
Height 4'8" / 1.42M
Nett weight actual. 860 Kgs.
9
Serial No. 160
Capacity 520mm Diameter or 520mm x 520mm Square
Cavtaxua
Input 415/3/50 ac 5.5 kW
Speeds 65'-426' / 20 Metres-130 Metres Per Minute
Vice opens Hydraulically
Twin vices Yes
Stroke of feed vice 500mm
Fitted with Coolant
Length 3400mm
Width 2200mm
Height 2350mm
Nett weight actual. 3,880 Kgs. / 3.8 Tons.
11
Serial No. 26C1020346
Capacity Rounds 260mm, squares 260mm, rectangles 300mm x 260mm
Blade Size 3660mm x 34mm x 1.1mm
Input 415/3/50 hz
Speeds 20 - 100 Metres per minute
Vice opens 450mm
Twin vices Yes
Stroke of feed vice 403mm
Control HITECH touch screen
Fitted with Swarf conveyor, coolant, rear safety guard
Equipment Bundle clamps
Features Roller tracking (2900mm x 500mm x 780mm)
Length 2150mm
Width 2100mm
Height 1800mm
Nett weight actual. 1,700 Kgs / 1.7 Tons
Ca2ryieu
11
Serial No. 6018 - 106 -149
Capacity 520mm Diameter
Bhk7plc3xu
Blade Size 7239mm x 50mm 1.3mm
Input 380/3/50hz
Speeds 20 - 130 metres per min
Vice opens 530mm
Twin vices Yes
Stroke of feed vice 500mm
Multi Feed Yes
Fitted with Swarf conveyor, Coolant
Equipment Roller tracking, 3000mm x 600mm
Length 4060mm
Width 2300mm
Height 2200mm
Nett weight actual. 5,090 Kgs. / 5 Tons.
11
Serial No. 7970201
Capacity 650mm dia, 650mm x 650mm
Input 415/3/50 AC 7.5kW
Speeds 16 - 100 M/Min
Twin vices Yes
Fitted with Swarf Conveyor, Coolant
Length 14'2" / 4.32m
Bfkah8evjt
Width 7'6" / 2.29m
Height 9' / 2.74m
Nett weight approx. 6.5 tons / 6604 kgs
8
Serial No. 785360
Capacity 260 dia, 260mm x 260mm
Input 415/3/50 4kW
Speeds 17 - 120 M/Min
Ycg2nny
Vice opens 270mm
Twin vices yes
Stroke of feed vice 600mm
Fitted with swarf conveyor and coolant
Length 2290mm
Width 2140mm
Height 1680mm
Nett weight 1980 kgs
11
Serial No. C0900075B
Capacity 22" / 558mm dia, 22" x 22" / 558mm x 558mm
Input 415/3/50 7kW
Ycqmtbz
Speeds 18 - 120 m/min
Vice opens 22.1/2" / 571mm
Twin vices yes
Stroke of feed vice 34" / 863mm
Control Hyd-Mech
Fitted with Swarf screw, bundle clamp & variable downfeed
Length 370cm
Width 230cm
Height 240cm
1
Serial No. 980419
Capacity 330mm dia, 300mm x 300mm or 350mm x 250mm
Input 400/3/50 3.7kW
Speeds 25-80 m/min
Bfkakkocj2
Vice opens 400mm
Twin vices yes
Stroke of feed vice 500mm
Multi Feed yes
Fitted with bundle clamps, swarf screw & coolant
Length 7' / 2133mm
Width 6'4" / 1930mm
Height 4'4" / 1320mm
8
Serial No. 598642
Capacity 530mm dia, 530mm x 520mm
Input 415/3/50 7.5kW
Speeds 17 - 110 m/min
Vice opens 540mm
Twin vices yes
Stroke of feed vice 600
Multi Feed yes
Fitted with Chip removal brush, swarf conveyor and coolant
Length 13' / 3.90m
Width 7'6" / 2.28m
Height 7'8" /2.33m
Nett weight actual 4770 kgs/ 4.7 tons
Bfkaihv07u
6
Serial No. 139721
Table size 520mm x 520mm Sub table 480mm x 255mm
Tilts 15 - 0 - 45 degrees
Input 415/3/50hz 1.5 kW
Speeds 15 - 910 metres per min
Throat 762mm
Daylight 254mm
Fitted with ideal blade welder & grinder
Dybdunfqu
Length 1600mm
Width 660mm
Height 1850mm
Nett weight. 300 kg
11
Serial No. 535
Capacity 800mm Round, 800mm x 800mm Rectangular
Blade Size 11500mm x 1.3mm x 67mm
Twin Pillar Yes
Input 400/3/50hz 11kW drive motor
Speeds 15 - 90 m/min Variable
Vice opens 800mm
Twin vices Yes
Stroke of feed vice 500mm
Fitted with Coolant
Length 5300mm
Width 2330mm
Height 2910mm
Fk3ozun
Nett weight actual. 6,430 Kgs. / 6.3 Tons.
6
Complete sawmillCapacity: 70 m3/8 h shift,BandsawManufacturer: MEM, Bandsaw: MEM Teletwin,Production year: 1989,Electric motor: 2 x 75 tirip sawManufacturer: MEM,Model: 2MT2,Electric motor: 2 x 90 kW,Production Year: 1991,Blades: 4 each side,Speed: up to 120 m/min,Blade diameter: 500 mm,Blade thickness: 4,2 mm,Maximum cutting hight: 150 erManufacturer: Lindqvist,Model: K583R,Electric motor: 22 kW,Speed: 50-90 m/pperManufaturer: SEGEM, Model: 668/2,Production year: 1991,Electric motor: 90 kW,Chip...
1
ISELI CNC sharpening machine, type BC 1
manufacture year 2009
Chyek7ey
CNC controlled sharpening machine for wet grinding bandsaw blades and circular saw blades
Technical details
cutting diameter 310 mm
saw band length 5000 x 34 x 1,1 mm
cutting width 520 mm
cutting speed 20 - 140 m/min
total power requirement 8 kW
weight of the machine ca. 3,0 t
Additional information
Automatic Bandsaw + Magazine
Cutting range:
- Round: 310 mm
- Flat (Width x Height): 520 x 310 mm
Mitre left:
- 75 deg. round 310 mm, flat width x height = 520 x 310 mm
- 60 deg. round 310 mm, flat width x height = 450 x 310 mm
- 45 deg. round 310 mm, flat width x height = 350 x 310 mm
...
10
cutting diameter max. 255 mm
saw band length 2.750 mm
width of saw-band 27 mm
dimensions of saw-band 2.750 x 27 x 0,9 mm
cutting angle - 60° / + 45 °
band speed 35 / 70 m/min
Owq2x
Cuttingrange 90° max. 255 mm
capacity 90 degrees: square 190 mm
capacity 90 degrees: flat 190 x 310 mm
capacity 60 degrees: round 135 mm
capacity 60 degrees: square 135 mm
capacity 60 degrees: flat 135 x 135 mm
capacity 45 degrees: round 220 mm
capacity 45 degrees: square 190 mm
capacity 45 degrees: flat 135 x 190 mm
...
cutting diameter 0450 mm
saw band length 5850 mm
cutting width 1,3 mm
capacity 90 degrees: square 450 x 450 mm
capacity 90 degrees: flat 450 x 600 mm
sawing stroke 752 mm
feed in one step 400 mm
height of blade 41 mm
total power requirement 8,5 kW
weight of the machine ca. 2 t
dimensions of the machine ca. 3,1 x 1,6 x 2 m
C3wvg2jc
New horizontal full automatic bandsaw. Machine is a two column type.
Machine is complete with sawing blade ready for work. Material feeding by servo
motor. All oth...
1
Technical specifications: Welding range: metal working bandsaws 5 - 32 mm, bi-metal working bandsaws 6 - 25 mm, tungsten alloyed bandsaws 5 - 25 mm, wood working bandsaws 5 - 35 mm, connected load 4 kW (400 volts / 50 Hz), weight 39 kg, dimensions w x d x h = 250 x 255 x 355 mm, colour green.
Description: Suitable for butt welding band saws, band knives, etc. without the addition of solder and flux. Accessories: Attached shears
Bnc2obl77u
3
cutting diameter 320 mm
band length 4660 x 34 x 1,1 mm
cutting lenght max. 1100 mm
Rovdkfs
sawing motor 4,0 kW
weight of the machine ca. 2,6 t
range L-W-H 2,8 x 2,0 x 2,0 mm
used 2 coloumn automatic bandsaw
- chip conveyor
- coolant system
- Mitsubishi E 1032 control
- some bands
- 320 x 320 mm cutting area
- package clamping
3
Beschreibung:
- Zuverlässige Bandsawing for präzises Arbeiten
- Verwindungssteife Konstruktion
- Hohe Standfestigkeit by kleinstem required space
- Sicheright hand and verlauffreie Sägeschnitte in wood, plastic and NE-Metall
- Der heavy gusseiserne working table with geschliffener Oberfläche ist tiltable from 0 to 45°
- Leistungsstarker motor
- Sicherheitsschalter stellt beim opening der door the machine ab and verhindert ungewolltes Weiter- soas Anlaufen
- Mit präziser 3-rolls-Sägebandführung t...
cutting range: 1200 x 500 mm
round material: bei 90°= 530 mm
flat material: bei 90°=1200x500 mm
round material: bei 45° re/li = 530 mm
flat material: bei 45° re/li =700x500 mm
cutting speed: 17-110 m/min
mitter cutting - both sides: 45 °
dimensions of saw-band: 8800 x 54 x 1,6 mm
Ly87chi3
bore diameter: 35 mm
spindle taper: SA 40
spindle stroke: vertical 0-350 mm
spindle revolutions per minute : 200-800 U/min
number of spindles: 3 Stück
control: 7-achsig numerisch
feed min/max: max. 300 mm/min
...
6
Vertical wood bandsaw PEHAKA type SH-8
Masch. No. 35077 built in 1981
Roll diameter 800 mm
Throat depth 780 mm
Cutting height 340 mm
Table dimensions 810 x 780 mm
Belt speed 3000 m / min.
Blade length 5500 and 5600 mm
Blade width 6-30 mm
7.5 kW
Power supply 380 Volt, 50 Hz, 15.5 amp.
-adjustable work table
-both wheels with new rubber bandages
-Band saw blade roller guides above the table height-adjustable
-Band saw blade roller Guide under the table
-1 piece of pipe connection for suction Ø 100...
2
cutting diameter 0280 mm
saw band length 3660 mm
cutting width 0,9 mm
capacity 90 degrees: square 260 x 260 mm
capacity 90 degrees: flat 210 x 340 mm
feed length 500/2000 mm
capacity 45 degrees: round 230 mm
capacity 45 degrees: square 220 x 220 mm
capacity 45 degrees: flat 240 x 140 mm
M0d9r
cutting speed 20- 110 m/min
total power requirement 3 kW
weight of the machine ca. 0,8 t
dimensions of the machine ca. 1,3 x 1,27 x 1,9 m
New horizontal full automatic bandsaw with electronic control. Ma...
8
Used full automatic bandsaw from BIANCO
Type: MOD 330 AUT
Bsa7bvax3f
YOM: 2011
Single side angle adjustment
Equipped with mist lubrication
3
cutting diameter 1600 mm
saw band length 11000 mm
cutting width 1,6 mm
capacity 90 degrees: square 1600 X 1600 mm
capacity 90 degrees: flat 1600 X 2500 mm
total power requirement 11 kW
weight of the machine ca. 19 t
dimensions of the machine ca. 4000 X 8400 X 3500 m
New horizontal semiautomatic bandsaw. Machine is a two column type. Machine
Brcudkfji7
has a loading table with automatic feed. Machine is complete with sawing blade
ready for work. Machine has a feeding table infront of the mac...
1
throat 480 mm
workpiece height 220 mm
Beohglap8o
table-size 750 x 650 mm
roll diameter 530 mm
dimensions of saw-band 3425/3725 x 6/19 x 0,85 mm
cutting speed 10 - 154 m/min
table - inclinable nach 2 Seiten
total power requirement 1,1 kW
weight of the machine ca. 1 t
dimensions of machine L x W x H 1,60 x 0,65 x 2,0 m
= vertical bandsaw, tilting
table swivelling in 2 planes
2
- Ideal for ambitious modellers and
handyman
- Flywheels made of die-cast aluminum with
special coating
- Gray cast iron worktable swiveling up to 45 °
- Equipped with precise 3-roller saw
band guide respectively above and below the table
Technical specifications:
Dimensions and weights
Ct2ruqm3
Length approx. 490 mm
Width / depth approx. 420 mm
Height about 835 mm
Weight approx. 20 kg
Connection dust extraction
Suction nozzle diameter 53 mm
Work table (s)
Length 300 mm
Width 300 mm
Height...
6
Fully automatic mitre band saw
Automatic bandsaw for miter cuts KASTO type KastoPOS GA3
machine No. 6417 103 007 Year of construction 2001
Cutting range round at 90° Ø 320 mm
Cutting range square at 90° 320 x 320 mm
Pyitpylb
Cutting range Round at 45° Ø 280 mm
Cutting range square at 45° 280 x 320 mm
Cutting range Round at 60° Ø 220 mm
Cutting range square at 60° 200 x 200 mm
Maximum material weight 1000 kg
Saw blade dimensions 4930 x 34 x 1.1 mm
saw band speed 20-110 m/min. infinitely variable
...
6
Dear customers currently we offer a bandsaw of the brand F. Zimmermann. Here are the technical data of the machine:
Table: 750 x 750 mm
Cutting width: 600 mm
Super cutting height: 510 mm
Swivelling of table: 45/20°
Diameter of the pulley: 630 mm
Power: 3 kW
Bsd7ogkmxt
Speed: 3.000 U/min
Cutting Speed: 1.400 U/min
Dimensions: 1.170 x 1.510 x 2.400 mm
Weight: approx. 650 kg
If you have further questions feel free to ask us. We are looking forward to your inquiries!
6
1.100 €
Offer not including VAT
Another 23 days
Another 23 days
Vertical bandsaw Mössner Rekord SM 320
Qig2unr
1 piece Vertical bandsaw Mössner Rekord SM 320, year 1990, S/N 27931, with lighting ex location production hall/workshop
item number: 000075103
Location: Production hall/workshop
cutting diameter 0670 mm
saw band length 8330 mm
cutting width 1,6 mm
capacity 90 degrees: square 650 x 650 mm
capacity 90 degrees: flat 650 x 1080 mm
capacity 45 degrees: round 670 mm
capacity 45 degrees: square 650 x 650 mm
Ov2xz
capacity 45 degrees: flat 650 x 670 mm
capacity 60 degrees: round 670 mm
capacity 60 degrees: square 650 x 650 mm
capacity 60 degrees: flat 650 x 860 mm
total power requirement 9 kW
weight of the machine ca. 4,3 t
dimensions of the machine ca. 4,5 x 2,2 x 2,5 m
New...
1
Cutting capacity round 90 ° 255 mm
Cutting performance square 90 ° 230 mm
Delivery time approximately 8-10 weeks after placing the order
Cutting capacity: 90°: approximately 255 mm square 230 mm rectangle 300 x 180 mm
45°: about 210 mm square 190 mm rectangle 200 x 160 mm
60°: about 135 mm square 110 mm rectangle 130 x 100 mm
Band saw blade dimensions: 2,765 x 27 x 0,9 mm
Berpj8i3xz
Speed: 18/110 m / min
Working height: 870 mm
Motor: 1.5 kW
Dimensions: 2,300 x 1,830 x 1.600 mm
Weight: 1,000 kg
A...
1
NEW
description
- Ideal for ambitious model makers
and home improvement
- Flywheels made of die-cast aluminum with
special coating
- Gray cast iron worktable swiveling up to 45 °
- Equipped with precise 3-roller saw
band guide respectively above and below the
table
- Aluminum longitudinal stop with quick release
Ok8o7
precisely adjustable with the help of magnifying glass and
millimeter scale
- Two belt speeds adjustable
Technical specifications:
Dimensions and weights
Length approx. 870...
4
cutting diameter 0650 mm
saw band length 8200 mm
cutting width 1,6 mm
capacity 90 degrees: square 650 x 650 mm
capacity 90 degrees: flat 650 x 850 mm
feed length 1-1400 mm
sawing stroke 700 mm
coolant tank 120 l
hydraulic power unit 36 l
Control touch
total power requirement 9 kW
weight of the machine ca. 8 t
dimensions of the machine ca. 3,9 x 1,5 x 2,6 m
Oaju9
New horizontal full automatic bandsaw. Machine is a two column type with linear
guides. Machine automatic material feed and bundle...
9
Brand: Ideal.
Type: BAS 52.
Flash Butt welding Machine.
Pneumatic clamping.
Annealing pyrometer.
Blade width up to 50 mm.
Eqrajdyq8
Machine in good fully working condition.
Weld band saw blades for wood or metal.
Made in Germany.
Delivery from stock.
Welding ranges:
Bi-metal: 6 - 50 mm;
Band knives: 6 - 50 mm;
Wood bandsaw: 6 - 50 mm;
Stainless steel saw: 10 - 30 mm;
Bandsaws high speed steel: 12 - 32 mm.
Weight cca.: 460/560 kg.
Packing dimensions h x w x d: 1500 x 1400 x 900 mm.
Packing in...
6
ID000560Log reducer - bandsaw line Söderhamn AKE 245A 1500 twinManufacturer: Kockums Söderhamn, Model: AKE 245A 1500 twin,Capacity: 50 m/min,Chipper canter electric motors: 2X45 kw,Disc diameter: 1460 mm,Number of chipper knives: 2x114,Band saw electric motor: 2X55 kw,Blade width: 125 - 206 mm,Blade thickness: 1,25 - 1,47 mm,Blade length: 9,9 m,Max log diameter: 600 mm,Max distance between blades: 483 mm,Min distance between blades: 75 cirption: - board separator after bandsaw,- log turner and f...
cutting diameter 0750 mm
saw band length 8920 mm
cutting width 1,6 mm
capacity 90 degrees: square 650 x 650 mm
capacity 90 degrees: flat 550 x 1000 mm
capacity 45 degrees: round 650 mm
capacity 45 degrees: square 650 x 650 mm
capacity 45 degrees: flat 600 x 700 mm
2sq2tq
capacity 60 degrees: round 750 mm
capacity 60 degrees: square 650 x 650 mm
capacity 60 degrees: flat 600 x 800 mm
total power requirement 9 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 4,5 x 2,2 x 3 m
New ho...
5
cutting diameter:10-250 mm
saw band length:4100 x 34 mm
cutting width:1,1 mm
cutting lenght:3 - 9999 mm
sawing motor:5,3 kW
total power requirement:8 kW
weight of the machine ca.:1,7 t
dimensions of the machine ca.:1,65 x 1,95 m
hydraulic bandsaw machine in double-column design with double reciprocating piston, hydraulic work piece feed, max. feed length 600mm/stroke, multiple stroke, stepless VARI-drive, stepless adjustable saw blade pressure via hydraulic valve,piece counter with piece qt...
10
cutting diameter 220 mm
saw band length 2455 mm
table height 850 mm
cutting width 230 mm
cutting speed 25 - 80 m/min
dimensions of saw-band 2455 x 27 x 0,9 mm
90 mm
90 mm
90 x 100 mm
150
Impact energy 150
Air consume per blow 150 x 210
220 mm
stroke back stop 210 mm
cross-slide 230 x 185
total power requirement 1,2 kW
weight of the machine ca. 0,24 t
dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
Miter cuts to 60 ° left
Benwb9nae8
- cutting speed 35/70 m / min.
- Vice with rapid cla...
cutting diameter 0750 mm
saw band length 8920 mm
cutting width 1,6 mm
capacity 90 degrees: square 650 x 650 mm
capacity 90 degrees: flat 550 x 1000 mm
capacity 45 degrees: round 650 mm
capacity 45 degrees: square 650 x 650 mm
capacity 45 degrees: flat 600 x 700 mm
capacity 60 degrees: round 750 mm
capacity 60 degrees: square 650 x 650 mm
capacity 60 degrees: flat 600 x 800 mm
total power requirement 9 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 4,5 x 2,2 x 3 m
Bku8uh0uff
Ne...
6
On offer is a vertical bandsaw Select Interkont SU4.
2suw8m
1
Cutting capacity round 90° 260 mm
Cutting capacity square 90° 330x120 mm
Bdslilp0rt
delivery time prompt, subject to prior sale
special price € 10.900,- (instead of € 12.300,-)
or leasing rate from € 203,83 *
cutting capacity 90°: round 260 mm, square 240 mm, rectangle 330 x 120 mm
Cutting capacity 45°: round 200 mm, square 190 mm, rectangle 200 x 130 mm
Cutting capacity 60°: round 120 mm, square 115 mm, rectangle 120 x 100 mm
Cutting speed: 35/70 m/min
motor: 0,9/1,5 kW
belt dimensions: 3....
cutting diameter 1100 mm
saw band length 11000 mm
cutting width 1,6 mm
Brctxwhn2w
capacity 90 degrees: square 1100 x 1100 mm
capacity 90 degrees: flat 1100 x 1300 mm
total power requirement 7,8 kW
weight of the machine ca. 7,05 t
dimensions of the machine ca. 5,2 x 1,6 x 2,90 m
New horizontal semiautomatic bandsaw. Machine is a two column type. Machine
has a loading table with automatic feed. Machine is complete with sawing blade
ready for work. Machine has a feeding table infront of the ma...
cutting diameter 325 mm
saw band length 4160 mm
cutting width 350 mm
cutting capacity - flat 450 x 325 mm
cutting capacity - square 325 mm
dimensions of saw-band 4160 x 34 x 1,1 mm
table height 580 mm
total power requirement 3,67 kW
speeds steplessly adjustable 20 - 100 m/min
250 mm
250 mm
Capacity 45° rectangular 250 x 325 mm
weight of the machine ca. 1,01 t
dimensions of the machine ca. 2,15 x 0,86 x 1,5 m
Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low
Brxa9b...