Used Zero Point for sale (8,293)

Year of construction: 2018, condition: like new (used), Zero Point Clamping System Manufacturer: Vischer & Bolli VB tools Year of manufacture: 2018 Condition: unused Lodpfx Asgquv Uoanjak System consists of: 1 piece of Dock Lock locking plate, steel Size: 600x200x85/95 mm with 2 DockLock SAFE20 built-in cylinders up to 12.5 kN per cylinder 10 mounting holes for M16 Allen screws 1 custom base plate, steel Size: 800x250x76 mm 1 DEUX-MILL clamp 1 custom base plate, aluminum Size: 600x600x40 mm 5 SAFE20 long clamping studs with centering 10 SAFE20 long clamping studs without centering 5 SAFE20 long compensating clamping studs 1 hydraulic pump

Condition: good (used), We offer you: Lodpfxsw Ra Hwj Aanjak

Condition: like new (used), Zero point clamping system For rotary table: Laodpfx Ajhlu Nzsanok Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm. For clamping plate: Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Condition: new, Zero-point clamping system with Lang riser. Laodsxl R Dhepfx Aanek

Year of construction: 2014, condition: as good as new (ex-display), Zero point clamping system Make AMF Lasdpfx Aaef Dx R Uonsk Type 302828-K 20 diameter 110 mm

Condition: excellent (used), consisting of: 2 pcs. Art. No. 47155: Makro Grip 125 Centering Vise, clamping range 155 mm 1 pc. Art. No. 41350: Extended Stamping Unit 1 pc. Art. No. 41010: Center Marking Device for Stamping Unit 16 pcs. Art. No. 45570: Mounting Bolts, diameter 20 mm 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Art. No. 47355: Makro Grip 125 Centering Vise, clamping range 355 mm 1 pair Art. No. 44251: Avanti Base Jaws 4 pcs. Art. No. 44258.76: Top Jaw 77x126mm for Avanti 125 4 sets Art. No. 45570.10: Spacer Mounting Bolts, diameter 20 mm 2 pcs. Art. No. 47255: Makro Grip 125 Centering Vise, clamping range 255 mm 3 pcs. Art. No. 45742: Plate L384xW384xH27 mm, 4-position grid plate 96 (photo attached) 1 set Art. No. 47355-TG27: Twin-Grip Conversion Kit for Makro Grip 125 No. 47355 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Trolley for Stamping Unit Ledpoxauacsfx Aansak

Condition: new, Year of construction: 2025, functionality: fully functional, The 5-axis laser cutting system from the OPMT brand is a high-tech solution developed especially for the production and re-sharpening of PCD (diamond) and hard metal cutting tools. Thanks to laser processing, high surface quality is achieved without contact, while tool life and precision are significantly increased. The LTR-5AX model is suitable for both mass production and special tool processing needs with its robotic loading option and user-friendly software interface. It is especially recommended for companies processing wood, aluminum and composite materials. The machine is offered in Turkey with the CoreCut guarantee, and installation, training and service support are provided locally. The system, developed by the joint engineering of Joerg and OPMT, is actively used by many manufacturers in Europe. Delivery time: 8–12 weeks Warranty: 1 year Condition: New Laedpfjwr Tiiex Aansk Price: On request For more information or to get a quote, you can contact us: Emre Özkan – CoreCut

Condition: ready for operation (used), controller manufacturer: Heidenhain tnc 124, empty load weight: 6,000 kg, total length: 3,960 mm, total width: 2,450 mm, total height: 2,600 mm, Kiheung Point U3 X: 1200 - Y: 600 - Z: 550 mm CNC Longitudinal travel X-axe: 1200 mm Lajdpjx Impbofx Aansk Cross travel Y-axe: 600 mm Travel Z-axe: 550 mm Dimensions clamping space- table: 1700 x 470 mm Power on spindle: 7,5 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 40 > 1620 rpm

Condition: new, functionality: fully functional, fuel type: diesel, Year of construction: 2025, Equipment: hydraulics, rubber tracks, These four new tracked dumpers are ideal for professional use in construction, landscaping, and agriculture. The machines impress with their compact dimensions, high payload capacity, robust track systems, and reliable drives. Perfect for working in confined, challenging, or sensitive terrain. 1. Tracked Dumper 500 – 500 kg Payload Compact mini dumper for tight construction sites and gardens. Key Features: Engine: Koop 173 diesel, 4.0 kW Operating weight: 414 kg Payload: 500 kg Skip: 1050 × 730 × 730 mm Track width: 180 mm Tipping angle: 90° Speed: 4 km/h Dimensions: 1570 × 880 × 1300 mm Net price: €3,400 (RRP) 2. Tracked Dumper 500S – Lift Dumper, lift height 1200 mm With hydraulic lifting function, ideal for unloading into containers or trailers. Key Features: Engine: Koop 173 diesel, 4.0 kW Operating weight: 550 kg Payload: 500 kg Lifting height: up to 1200 mm Skip: 1050 × 730 × 730 mm Track width: 180 mm Speed: 4 km/h Dimensions: 1570 × 880 × 1450 mm Net price: €3,800 (RRP) 3. Tracked Dumper 1200 – Heavy-Duty Dumper, 1200 kg Payload Lsdpfxex Ifh Aj Aansak Powerful dumper for demanding transport tasks. Key Features: Engine: Koop 193 diesel, 8.2 kW Operating weight: 850 kg Payload: 1200 kg Skip: 1400 × 800 × 600 mm Track width: 180 mm Tipping angle: 90° Speed: 5 km/h Dimensions: 2060 × 880 × 1400 mm Net price: €6,200 (RRP) 4. Mini Tracked Dumper HT500Y-4 – Lift Dumper with Petrol Engine Compact and precise transport solution with hydraulic tipping system and lift function, ideal for tight work sites and sensitive ground conditions. Rubber tracks ensure minimal ground disturbance and high traction; the Briggs & Stratton petrol engine stands for reliability and low maintenance. Key Features: Engine: Briggs & Stratton petrol, 4.8 kW Engine type: 1-cyl. OHV, 4-stroke, air-cooled Displacement: 203 cm³ | Tank: 3.6 l Operating weight: 550 kg Payload: 500 kg Tipping system: hydraulic | Tipping angle: 100° Max. lift height: 1,020 mm Skip: 1050 × 730 × 730 mm (200 dm³) Speed: 2.88 km/h Gradeability: 20° Track width: 180 mm Dimensions (without platform): 1570 × 880 × 1450 mm Dimensions (with platform): 2050 × 880 × 1450 mm Net price: €3,800 (RRP) Condition & Delivery: Brand new, unused, current production (incl. 12 months warranty) Immediately available or short delivery times (subject to stock) Multiple units per model available on request Viewings possible by appointment. All machines comply with current EU safety standards and are CE certified. Interested? Contact us today! We are happy to advise you personally and provide an individual quote. Location: Rheda-Wiedenbrück

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Weight: 6.000 kg Horizontal band saw machine Ledpfswnhn Esx Aaneak High point HP-400 Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2013, condition: ready for operation (used), A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible. Laedpox A Hhkofx Aanek

Condition: used, Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Point, Incremental Rotary Encoder Lajdpeq Dr Svofx Aanek -Type: EI281B500ZE5LP/LD1 -Hollow shaft: Ø 15 x 26 mm -Dimension: 80/61/H48 mm -Weight: 0.3 kg

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,600 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, The SE18 Mini Excavator in the 1.6 t class stands out with its robust construction, modern hydraulics, and proven Kubota diesel engine. This machine is ideal for earthworks, landscaping, municipal use, and operations on confined construction sites. Thanks to its adjustable undercarriage, precise offset boom swing, and a fully CE-certified safety cab (ROPS/TOPS), the SE18 offers maximum flexibility, safety, and operator comfort. The integrated air conditioning with heating function, ergonomic controls, and clear cab layout allow for comfortable operation even over long hours. With the comprehensive bucket set included, this excavator is ready for immediate use. Technical Data & Features: - Engine: Kubota D902 – 3-cylinder diesel, 11.8 kW (economical & durable) - Operating weight: 1,600 kg - Hydraulic pump: Branded pump - Hydraulic valve: Northern Hydraulics – precise control - Auxiliary hydraulics: 2 circuits (e.g. for breaker, grab, auger) - Undercarriage: Rubber tracks, 230 mm - Adjustable undercarriage: 1,000 – 1,250 mm - Dozer blade: 1,100 mm - Boom: Swing left / right - Pin diameter: 25 mm - Full cab with ROPS/TOPS, CE-certified - Front windscreen can be opened - Side sliding window - Air conditioning with heating function Accessories & Attachments – SET includes: ✔ 30 cm digging bucket (with teeth) ✔ 50 cm digging bucket ✔ 80 cm digging bucket ✔ Air, fuel, and oil filters ✔ Toolbox ✔ Mechanical quick coupler Key Advantages: - Proven Kubota engine – extremely reliable - Hydraulic components from renowned manufacturers - CE-compliant safety cab - Perfect for tight job sites thanks to adjustable undercarriage - Complete bucket set included in the price Excellent value for money Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: - Short lead time possible (depending on stock) - Fixed delivery date in January 2026 guaranteed Lsdpfjx H Tirex Aanjak - Europe-wide delivery organized on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €14,490 (RRP) Location: Rheda-Wiedenbrück

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Lsdexmgq Tjpfx Aanoak Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: new, Year of construction: 2025, operating hours: 5 h, functionality: fully functional, fuel type: diesel, gearing type: automatic, number of seats: 1, operation weight: 2,000 kg, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.025 m³, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The HT20 PRO is a compact and powerful mini excavator in the 2.0-ton class, designed for professional use in construction, landscaping, and municipal applications. This machine stands out thanks to its robust construction, precise hydraulics, and high operational safety. The proven Kubota D902 3-cylinder diesel engine with 11.8 kW delivers smooth operation, low fuel consumption, and long service life. With its compact dimensions and adjustable undercarriage, the HT20 PRO is ideal for work on confined jobsites. Technical Specifications: Engine: Kubota D902 3-cylinder diesel engine Engine power: 11.8 kW Low fuel consumption Very low vibration operation Hydraulics: Two-stage cast hydraulic pump Load-sensing hydraulic valve Travel motor with high/low speed Steel-reinforced hydraulic hoses Work Equipment: Boom with side swing (left/right) Lajdpjx Hvvhofx Aanek Maximum digging depth: 1,995 mm Maximum reach: 3,130 mm Maximum digging height: 2,875 mm Maximum dumping height: 1,930 mm Undercarriage: Adjustable undercarriage Reinforced frame made of manganese steel Heavy-duty cast iron counterweights Rubber tracks with steel cord, 3-ply Track width: 200 mm Dimensions: Transport length: 2,650 mm Overall width: 970 – 1,270 mm (adjustable) Upper structure width: 1,055 mm Overall height with ROPS canopy: 2,350 mm Track gauge: 770 – 1,070 mm Tail swing radius: 980 mm Minimum swing radius: 1,670 mm Gradeability: 30° Equipment: Fully enclosed cab Heating and air conditioning Excellent all-around visibility Ergonomic controls Joystick control LED work lights Comfort seat Reinforced steel construction Accessories / Attachments (available as a set): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Auger bits 150 / 200 / 300 mm + extensions) – SET PRICE 700€ RRP Maintenance & Warranty: Service intervals: every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: Short-term delivery possible (depending on stock) Fixed-date delivery for January 2026 guaranteed Europe-wide delivery organized upon request This machine meets the highest safety standards and is CE-certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €16,600 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, The HT25PRO is a high-performance 2.5-ton class mini excavator in the premium segment, designed for professional and demanding applications. As a larger and more powerful version of the HT20, it offers increased power, reach, stability, and productivity. Equipped with an original Kubota diesel engine, load-sensing hydraulics, and a reinforced manganese steel structure, the HT25PRO is ideally suited for civil engineering, landscaping, municipal applications, and agricultural operations. Technical Specifications: Engine: Kubota D1105 3-cylinder diesel engine Power: 14 kW rated output (continuous duty), up to 18.4 kW peak output (no switchable power stages) Very low vibration Fuel-efficient Designed for continuous operation Hydraulics: Load-sensing hydraulic pump Load-sensing multi-way hydraulic valve Hydraulic pump pressure: 25 MPa System pressure: 22 MPa Hydraulic flow: 61.6 l/min Travel motor with high/low speed (Japanese standard) High-quality, heavy-duty hydraulic hoses Dimensions & Weight: Length × Width × Height: 345 × 143 × 250 cm Chassis width: 140 cm Operating weight: 2,500 kg Working Range: Swing boom left/right Rotation function Maximum digging depth: 2,370 mm Digging / dumping height: 3,500 mm Undercarriage & Structure: Manganese steel undercarriage with high torsional resistance Extendable / telescopic undercarriage Laser-cut, high-precision steel components Heavy-duty cast iron counterweight Equipment: Steel tracks (extra robust, professional duty) Fully enclosed cab Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick control LED work lights Comfort seat Reinforced steel construction Attachments / Implements (included set): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler including solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Augers 150 / 200 / 300 mm + extensions) – SET PRICE €850 RRP Maintenance & Warranty: Service every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: Short-term delivery possible (subject to stock) Fixed-date delivery January 2026 guaranteed Europe-wide delivery can be organized on request This machine meets the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) Lodpfsx Hhu Nsx Aaneak 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €23,500 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, overall weight: 2,320 kg, suspension: other, color: orange, Year of construction: 2025, operating hours: 5 h, power: 14.6 kW (19.85 HP), fuel type: diesel, gearing type: automatic, fuel consumption per hour: 2 l/h, number of seats: 1, operation weight: 2,200 kg, lifting height: 4,190 mm, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.068 m³, fuel tank capacity: 20 l, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact and powerful 2.5-ton mini excavator designed for professional use in construction, landscaping, municipal, and agricultural applications. Its robust construction and advanced load-sensing hydraulics deliver efficient, precise performance, even under demanding conditions. With its boom swing capability, the machine is ideal for work in confined spaces as well as for traditional earthmoving and foundation work. Key Technical Features: - Boom swing for precise operation in tight areas - Stable undercarriage (1,300 / 1,500 mm) for high stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-performance axial piston pump - Hydraulic piston travel and swing motors - High digging and breakout forces - Wear-resistant rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Upper structure ground clearance: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Travel & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dump height: 2,880 mm - Min. swing radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. drop depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Operating pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cabin with heating - Dozer blade - Joystick control - LED work lights - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel structure Accessories & Attachments – Included Set: - 25 cm trenching bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP Ljdpfsx Hg Etsx Aaneak - Hydraulic auger set up to Ø 300 mm (drills 150 / 200 / 300 mm + extensions) – Set price €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Short delivery times possible (subject to stock) - Fixed-date delivery January 2026 guaranteed - Europe-wide delivery available on request This machine complies with the highest safety standards and is CE-certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator, designed for continuous professional use in structural, civil engineering, and landscaping applications. With its robust steel construction, advanced load-sensing hydraulics, and compact dimensions, this machine is perfectly suited for tight construction sites as well as demanding earthmoving and foundation work. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, providing exceptional operator comfort, safety, and productivity — even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise work in confined spaces - Extendable undercarriage (990–1,300 mm) for maximum stability - Integrated travel motors with high/low-speed - Load-sensing hydraulic valves — energy-efficient and responsive - Axial piston pump with variable displacement - Plunger-type slew motor for upper carriage - Double cast counterweights for high stability - Wear-resistant rubber tracks, 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (upper carriage): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (extendable) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 HP) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. dumping height: 2,480 mm - Max. digging height: 3,570 mm Dozer Blade: - Max. lift height: 280 mm - Max. digging depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - System pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Standard Equipment: - Fully enclosed cab incl. heating - Joystick controls - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel frame - Double cast counterweights Accessories & Attachments — SET includes: - 25 cm trenching bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (150 / 200 / 300 mm augers + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: - Short delivery times possible (subject to stock) - Fixed-date delivery in January 2026 guaranteed - Europe-wide delivery organized on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück Lasdpfx Aaex Hg D Aenok

Condition: new, Year of construction: 2025, functionality: fully functional, LMH-3000 – Industrial Laser Welding Machine – 3000 W Fiber Laser – 4-in-1 Description The LMH-3000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single unit. Building on the proven LMH-1500, the LMH-3000 offers even more power and flexibility with its 3000 W laser source – ideal for thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling system, and ergonomic handheld operation, this machine is perfectly suited for continuous 24/7 industrial use. Technical Specifications Model: LMH-3000 (4-in-1) Laser Source: 3000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber laser Functions: Welding, cutting, brazing, surface treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Ledpjxc Ec Tsfx Aansak Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets, and more Energy Efficiency: Up to 80% savings compared to conventional processes Operation: Ergonomic handheld operation with optional wire feeder Advantages 4-in-1 functionality – versatile applications Higher output (3000 W) for maximum welding speed and material thickness CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal reworking Robust design for industrial applications Flexible use in metal construction, manufacturing, and maintenance Special Notes Available immediately from stock in Rheda-Wiedenbrück, Germany. Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Introduction to operation and application available by appointment. Extras & Accessories Wire feed system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts – ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Via freight forwarding (pallet shipping) within Germany and the EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and receive ready-to-use delivery!

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 170 kg, type of cooling: water, input current: 16 A, laser power: 2,000 W, input frequency: 50 Hz, continuous power: 3 kW (4.08 HP), Equipment: documentation/manual, type plate available, LMH-2000 – Industrial Laser Welding Machine – 2000 W Fiber Laser – 4-in-1 Description Laedpfoxc Ebcox Aanok The LMH-2000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single system. Based on the proven LMH-1500, the LMH-2000 offers even greater power and flexibility with its 2000 W laser source – ideal for thicker materials and demanding applications. Featuring an energy-efficient fiber laser, stable cooling system, and ergonomic hand-guided operation, this machine is perfectly suited for continuous industrial 24/7 operation. Technical Data Model: LMH-2000 (4-in-1) Laser Source: 2000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber Laser Functions: Welding, Cutting, Brazing, Surface Treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets and more Energy Efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic hand-guided torch, optional wire feeder Advantages 4-in-1 functionality – highly versatile Increased power (2000 W) for maximum welding speed and material thickness CE compliant according to Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal post-processing required Rugged design for industrial use Flexible applications in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Instruction on operation and application is available by appointment. Extras & Accessories Wire feeding system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts: Ideal for workshops, mechanical engineering, metal fabrication, automotive bodywork, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: By freight carrier (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!

Condition: like new (used), functionality: fully functional, fuel type: diesel, fuel consumption per hour: 2.5 l/h, fuel tank capacity: 20 l, overall weight: 2,800 kg, drive condition: 100 %, chain condition: 100 %, DGUV certified until: 05/2026, next inspection (TÜV): 05/2026, emission class: euro5, mast type: telescopic, Year of construction: 2024, operating hours: 35 h, Equipment: UVV, crane, hydraulics, rubber tracks, Top-maintained mini crawler crane (demonstrator with approx. 35 operating hours) offering powerful performance in the smallest spaces! For sale: 3-ton spider crane – almost new, only 35 operating hours We offer a premium 3-ton spider crane for sale. Technical Data: - Lifting height: 16 m - Drive type: Hydraulic motor drive, two-stage Lajdow Ugkqjpfx Aanjk - Motor voltage: AC 380 V - Starting method: Electric starter - Vehicle dimensions: 3450 × 950 × 1700 mm - Weight: 3,200 kg - Engine: Changchai Euro V - With remote control Optional Accessories (included in the sale): - Fly jib (3 meters) – for extra reach - Work basket (200 kg load capacity) – ideal for assembly work at height - Vacuum glass lifter – for safe and efficient handling of glass panels - Safe load moment indicator – for maximum operational safety - Remote control with display – for precise and convenient operation Key Advantages: - Only 35 operating hours, practically as new - Robust construction, compact dimensions – ideal for confined job sites and indoor work - Versatile deployment thanks to extensive accessories - Ready for immediate use - Attractive price-performance ratio Documentation and Approval: Supplied with complete documentation for the German market, including: - CE marking in accordance with the Machinery Directive (2006/42/EC) – required for commissioning in the EU - Annual inspections in accordance with DGUV Regulation 52 (UVV “Cranes”) and quadrennial expert inspections by a DGUV or BG recognized body - Inspection book (or electronic record) in accordance with BetrSichV for documentation of checks

Condition: new, Year of construction: 2025, functionality: fully functional, Product Description Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model featuring a 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser welding – precise, deep, and virtually distortion-free Laser cutting – ideal for thin sheets up to approx. 4 mm Laser cleaning – effectively removes rust, paint, and oxidation Weld seam cleaning – instantly cleans seams right after welding 📌 Technical Specifications: Laser power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Optical fiber: 10 meters Cooling: Integrated water cooling Operating modes: Welding, cleaning, cutting, pulse Voltage: 3×400V / 50–60 Hz Welding speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Scope of Delivery: 1× LMH1500 Fiber Laser Welding Machine 1× Handheld welding gun including nozzles 1× Automatic wire feeder 1× Laser safety goggles 1× Operating manual (German) 1× CE declaration of conformity 1× Risk assessment according to Machinery Directive 💼 Areas of Application: Suitable for stainless steel, galvanized sheet metal, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal fabrication, body shops, or maintenance operations. 🔒 Certified & Safe: CE certificate including risk assessment according to EU directives. Delivered with all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: By freight forwarding (pallet shipping) within Germany & the EU – shipping costs on request. Lasdpfow Tfbrox Aansk 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate operation!

Condition: good (used), Year of construction: 1990, functionality: fully functional, BOBST 3 POINT AUTOMATIC FOLDER & GLUER MACHINE • TYPE : DOMINO 110 • YEAR : 1990 Lsdpfxovy Tpgs Aanoak • SIZE : 110 CM DETAILS: 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment Very Good Condition Immediately Available

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Front dimension: Ø 90 mm -Recording: see photos -Total dimensions: Ø 110 x 315 mm -Weight: 8.5 kg Lsdpfxsrv Au Hj Aaneak

Condition: new, Year of construction: 2024, functionality: fully functional, 4-6 Point Folder Gluer for Corrugated and Cardboard TYPE : Technofold 800 SL SIZE : 80 cm YEAR : 2024 (Brand New) DETAILS: 4&6 corner device Back folding device: - Suitable to fold rear 4 & 6-corner flaps or panels and many other designs. - Motorized and untimed electronic back folding system with intelligent servo motor technology. - Easy to set up through the main touch screen. Feeder section - Driven independently by servo motor. - Adjustable electronic pile vibrator. - Lateral feed gates fully adjustable to the width of the blank. - 6 feeder belts. - Three adjustable front feed knives. Side register section - Independent section with an unparalleled lower carrier that guides the box to a parallel handrail, allowing for perfect blank alignment. Pre-folding section - Left-hand glue flap pre-folder up to 180º. - Third crease line pre-folder up to 135º. - 1st and 3rd crease openers. Crash lock bottom section Ledpfxovy T Uis Aaneak - 3 sets of upper and lower carriers. - Complete set of folding hooks and helixes to fold the front flaps of the blank smoothly and accurately. - Set of accessories for "B" lock bottom. Lower gluing section - Left lower gluing tank. - Easy to remove and clean. - Optional electronic upper gluing system by guns, upon request. Folding and Closing section - Smooth and accurate folding of 2nd and 4th creases. - Outer folding belts L&R side adjustable up to 180° with variable speed. - Two upper and lower carriers. - 25 mm lower and 30 mm outer belts on left and right carriers. - Width-wise adjustable heavy-duty compression rollers. Trombone section - Upper and lower drive mechanism for length adjustment. - Equipped with automatic belt tension-adjusting system. - Continuous and automatic box collection mechanism that ensures a neat transfer to the Press section, guaranteeing a well-aligned flow. - Electronic counter and "Kicker" for marking packets. Conveyor section - Independent and motorized press section. - Manual and automatic mode (follow-up). - Upper section moves back and forward, allowing for different box length. - 5.59 meters total length with 3.1 meters effective pressure length. - Pneumatic pressure adjustment. Processed Material Carton board max.800 gsm Corrugated flute type N,E,F & B Dimensions & Weight Length AC: 14.3m PC: 16.6m SL: 16.6m Width AC: 1.45m PC: 1.45m SL: 1.56m Height AC: 1.4m PC: 1.4m SL: 1.4m Weight AC: 7 Ton PC: 7.5 Ton SL: 8.1 Ton Capability Speed max. 300 m/min Inching speed 20 m/min Thickness of folded box max. 15 mm Blank width 800 mm Installation Electrical connected load AC: 20 Kw PC: 25 Kw SL: 30 Kw Compressed air 6 Bar Air compressor capacity 10m³/h Air tank capacity 60L