Nate Veral 60-12 Isobarometric Filler (1997)

Nate Druckfüller

Condition: used, Year of construction: 2005, Overview NATE PETBLOK 30/60/8 rinser-filler-capper monoblock for PET bottles, built in 2005 in the Czech Republic. Counter-pressure filling for carbonated soft drinks and sparkling water, also used for still water and other non-carbonated beverages. Output up to 11,000 bottles/h on 1.5 L PET. The machine is still installed, under power and in production. Technical data - Manufacturer: NATE (Czech Republic) - Model: PETBLOK 30/60/8 - Year: 2005 - Output: up to 11,000 bottles/h (1.5 L PET) - Bottle formats: 0.33 L, 0.5 L, 0.85 L, 1.0 L, 1.5 L and 2.0 L PET - Neck finish: PCO 1881 (short neck) - Products: carbonated soft drinks, carbonated and still water, non-carbonated beverages Equipment - Rinser, counter-pressure filler and capper in one monoblock - Bottle infeed with feed screw and neck-handling starwheels - Cap elevator with chute to the capper - Operator panel Siemens SIMATIC Multi Panel - Full guarding with doors Condition Used, in good working condition, installed and running in production. The machine can be seen in operation before dismantling. Bwsdpfxjz R Ulme Alfsw Availability In production until 23 December 2026, ready for pickup from January 2027. Location: Serbia.

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Bwedpfexfvh Ssx Alfew

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details - Manufacturer: NATE (Czech Republic) - Model: Veral 60 - Year of Manufacture: 2004 - Number of Filling Stations: 60 - capacity: 20.000 bottles/h - Filling Method: Counter pressure (overpressure) - Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Bwsdpfxeyb Si So Alfsw - Condition: Well-maintained, fully operational

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Bsdpfx Ael Sli Dslfoww

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Bwedpsw U A T Isfx Alfjw Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. Bwsdpfotrv E Usx Alfew The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle.

Condition: new, functionality: fully functional, For the gentle preservation of liquid foods with or without carbon dioxide in pre-filled bottles, jars, pouches, or cans. Depending on the type of container, 240–360 l/h can be pasteurized. A wide range of bottle shapes can be used (milk bottles, beer bottles, preserving jars, etc.). The desired product temperature and holding time can be electronically controlled between 0 and 99 minutes. The display is clear and easy to operate. Nominal heating capacity: 20,000 W (up to 360 l/h) Connected load: 20.15 kW Electrical connection: 400V 50Hz (3-phase, 16A) External dimensions: Length: 2214 mm Width: 870 mm Height (= working height): 1090 mm Water bath internal dimensions: Length: 1770 mm Width: 800 mm Maximum bottle height: 330 mm Bwsdpjw Aw T Tjfx Alfew Empty weight: 220 kg Water capacity: approx. 345 l

Condition: good (used), Year of construction: 2021, MEP AVT400 Capping machine Serial: 271221 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph Bodsu S Rk Hepfx Alfsww

Condition: like new (used), Stainless steel storage tank 5.000 liter Bwsdpfx Ajhridcjlfjw Dimensions: (diameter)1.850 mm x (height) 2.200 mm Storecapacity: 5.000 liter Material: SS 304

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) Bsdpezcu Sljfx Alfsww - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system