Screw making machine

National Machinery M5

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: Lajdpfsw Niuhox Akfsa - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: good (used), Year of construction: 2000, table length . mm table width . mm burner heads . 2 Lsdjqn A Ryopfx Akfsaa total power requirement . kW weight of the machine ca. 1478 KG

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled Lasdpfswp Rqfox Akfja All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Laedpfx Aeu Rqynokfsa Complete documentation

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Lasdpfx Ajhwrgtokfea Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Lsdpfx Aodt Rgvjkfeaa VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg Lajdsc Rmy Nepfx Akfsa The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Lodpow Iu T Tsfx Akfsaa Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Ledpfx Akehx Elfofoaa Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, WIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC Unit functions only with DC welding and contact ignition Serial no.: 445276 Year of manufacture: approx. 1990 Output: 230 amps = 35% duty cycle 180 amps = 60% duty cycle 140 amps = 100% duty cycle Lsdpfx Asdzqa Ijkfsaa Adjustment range: stepless Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding function - DC welding with contact ignition operational - AC welding and high-frequency ignition not operational - 7 meter hose package with TIG torch - Connector for remote potentiometer (foot pedal) - foot pedal not included - Air cooled - Gas pressure regulator Space requirements (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test produces good results when welding stainless steel with DC current; high-frequency ignition is non-functional, but the arc can be triggered via a short contact. When welding aluminum with AC current, no arc is formed.