Straightening Press - Single Column

NEFF 6 SRK

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Djdpfx Adeiffwqedocr Useful length : 1270 mm Top roller diameter : 130 mm Side rolls diameter : 130 mm Motors total power : 3,3 KW Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Dcodsfx Hv Hjpfx Adder hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Dedpfx Adotiwgijdjcr Ground level installation

Condition: excellent (used), Year of construction: 1992, working width: 1,020 mm, sheet thickness steel (max.): 4 mm, stroke length: 250 mm, Motorized folding machine Fab. Schröder Typ. MAK II 1000/4,5 year 1992 Technical data Make: SCHRÖDER Type: MAK 2 Year of construction: 1992 Effective length: 1020 mm Capacity at 400 N/mm² 4.5 mm Stroke upper beam: 250 mm Adjustment of bending beam 50 mm Dodpfx Adjugum Ijdjcr Bending angle: max. 135° Weight: approx. 2,140 kg Dimensions: approx. L 2.10 x W 1.90 x H 1.50 m Equipment - Manual backgauge with support table: 10 - 1000 mm - Double foot switch - 45° focus rail - Bending rails 10 mm, 25 mm All data without guarantee A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2022, operating hours: 550 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm Djderwvvyspfx Addecr * Overall width (minimum): 1,280 mm (990 mm) * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) * Tool kit * CE conformity * Cab with heater * 1x standard hydraulic circuit (with pedal) * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN Dodpeg S R Twefx Addocr die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: ready for operation (used), Year of construction: 1998, pressing force: 250 t, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, stroke length: 150 mm, power: 37 kW (50.31 HP), Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. Dcsdpfery Trpex Addjr L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA Dsdpfxorxg S To Addscr rated current 6,1 A weight of the machine ca. 1 t

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm Dodsktg Dhopfx Addscr - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm Dcodpeffm Hhjfx Addor table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.