CNC Turning- and Milling Center

NILES-SIMMONS N20-2 MC

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm Cjdpsv Nw Npefx Agkspw turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Specifications Manufacturer LORENZ Model LS 630 Condition Used Stock Number DCL1722 Module 12 Max diameter 630 mm Working stroke 220 mm Center distance worktable / cutter spindle 450 mm Machine weight 10.000 kg Spindle diameter 110 mm Table diameter 730 mm Cpsdjwr Dx Uopfx Agkjw distance between table and spindle 580 mm Ø table hole 450 mm Description Equipped with : Change gears Manuals

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Cpodpfxev Uqcge Agkow

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW Cpodpjw Tcvmsfx Agkew - Torque: 1,050 / 883.8 Nm Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: • Box ways • C-axis • Y-axis • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: height tilted min: 800mm Cpedpfxom Ew Ste Agkow height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Codpfx Aoiwkhkogkspw

Condition: excellent (used), Year of construction: 2013, operating hours: 87,327 h, functionality: fully functional, We offer you: Universal CNC machining center Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical specifications: Travel distances: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. spindle speed: 18,000 rpm Drive power - main spindle (100/40% ED): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & equipment: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - In-process tool measurement, type: BLUM Laser NT Hybrid - Coolant supply 40 bar through the spindle center - Coolant tank 2,500 l Cjdpfx Asyhbcuogkepw - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D path control - Infrared measuring probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal tower - Rinse gun with pump - Operating mode 4 - Machine adaptation for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partly with additional Viton/felt wipers - Sealing air for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adjustment of the maintenance plan for steel covers - Interface for camera monitoring and integration into the control system - Machine equipped for vacuum operation, including: - 2-channel rotary union, special centering bush and cable conduit in T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum port) - Integration of vacuum monitoring with terminals for NC stop and error message "Vacuum error" - Oil-resistant rubber hose secured by 2 clamps at the rotary union - Evaluation of "minimum level" error in feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use of spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides in X, Y, and Z axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly listed in the additional information. Technical data, information, and interim sale subject to change and errors!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Contact us for more information about this machine. • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment Cpjdpfxjx D Iirj Agkjw • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor Cpedpfxoxn Aczs Agksw - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: used, Year of construction: 1992, Technical details: spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1450 mm Cjdpfx Ageu Idqbjkjpw z-axis: 930 mm w-axis: 506 mm B-axis (table): 360 ° control for program: HdH TNC 407 tool taper: SK50 number of spindle speeds: 5 - 1.600 / stufenlos table load: 4,0 t table-size: 1100 x 1400 mm table rotating: 360 ° feed steps: X/Y/W/Z-Achse: 2 - 2000 mm/min Rapid feed X axis: X/Y/W/Z-Achse 5000 mm/min. total power requirement: 40 kW dimensions electric cabinet: 2000 x 600 x 2000 mm machine dimensions LxWxH: 4,9 x 3,7 x 3,8 m weight of the machine ca.: 14 t CNC drilling-milling machine with hydraulic power unit. Working paths from the table: X-axis table transverse 1500mm W-axis table longitudinal 1000mm 9x T-slots according to DIN 650 Equipment: measuring probe electronic handwheel hydr. weight compensation Y-axis universal milling head And some accessories, ask for them! i.D. *