Automatic optimising end cutting saw

Salvador Superpush 200

Condition: ready for operation (used), Year of construction: 2025, This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Additional equipment • Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. • Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. Machine Benefits Qualitative Machine Benefits • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Pusher slide dimensions: 300 x 345 x 25 mm • Feed speed: adjustable max feed speed set to 60 m/min • Pusher drive system: brushless dc servo drive motor with electronically controlled feed. • Productivity enhancements: increases productivity and improves wood yield. Hnjdpfx Aisyaikdsyel • Reliability features: robust construction with thick, reinforced steel frame. • Processing accuracy: two electropneumatic aligners ensure square cuts. Technical Machine Benefits • Special inclined surface with a 30° angle, intelligent clamping, and automatic lift pusher during scanning. • Windows-based software with a 22" led color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-aided cnc. • Software: linux-based optimization algorithm with a windows 10 interface. • Pc features: intuitive s4u software, extensive customization, real-time updates, error detection, and remote maintenance software. • Saw motor power: 5. 5 kw • Saw blade type: carbide-tipped circular saw • Blade diameter: 500 mm • Number of teeth: z=108 • Board length before cutting: max 4100 mm, min 500 mm Extra Information Machine still under power. Please contact us for consultation and a custom-tailored offer.

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom Hjdpfjhuthyox Aiyjnl constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives immediately ready for use

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Hnjdpfxjhpbtho Aiysl Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width Hedpfx Aswl Hyujiysnl At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: as good as new (ex-display), Year of construction: 2026, - Usable internal dimensions: D=900mm H=580mm (other sizes available on request) Hedpof A D Itofx Aiyonl - Spray pressure: 3.2 bar - Basket load: 200kg - Tank volume: 130L - Standard equipment: • Oil skimmer - Discharge device • Frame, lid, and housing made of stainless steel • Timed electric steam extraction • Basket in stainless steel • Stainless steel filter on the pump suction side • Stainless steel heating elements • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water filling • Safety limit switch monitors the lid opening • Stainless steel spray nozzles • Weekly timer for heater and oil separator • Operating hours counter

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Hnodpjflc T Sofx Aiysl Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,213 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: gas, mast type: duplex, drive type: Treibgas, LPG forklift Mast type: Duplex Technical condition: good Battery condition: 80 - 100% Sideshift, Hsdpfjvgh Hysx Aiyjnl 3rd valve, 4th valve, heater, full cabin, CE certificate,

Condition: good (used), Year of construction: 2010, functionality: fully functional, Weinmann Butterfly Turning Table Dimensions per table: 12.0m x 3.20m 1 fixed table with pneumatic clamps and extendable counter-clamps 1 movable table with longitudinal transport rollers incl. cable trays and floor rail Hedoxdm H Aopfx Aiyenl Fully functional. Immediately available, partially already dismantled.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Hnedpfx Aisx H Uaxjyel Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW

Condition: used, Technical data: Max cutting width: 400mm Max cutting height: 200 mm Max saw blade diameter: 420 mm Shaft diameter: 80mm Smooth feed adjustment Anti-reflection protection Extraction port: 250 mm Safety switch Power: 400V Power of the main engines: 2x45 kW Total power: 92 kW Hnsdpfx Aisitvblsyel Manufacturer: Demak Overall dimensions: Length: 2500mm Width: 1900mm Height: 2100mm