Multi-spindle head 5 drills

Nottmeyer 32 Lochabstand

Condition: good (used), Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 2x drills -Recording: M8 -right/left: rotating alternately Nsdpjb A R Iisfx Abbodd -Drill distance: 32 mm -Quantity: 1 piece available -Dimensions: 90/60/H130 mm -Weight: 2 kg

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e Nsdpef Aad Njfx Abbsdd They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: good (used), Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 9x drill Ndsdob A R H Rjpfx Abbsd -Admission: M8 -right/left: rotating alternately -Distance drill: 32 mm -Number: 10 drill heads available -Price: per piece -Dimensions: 285/80/H90 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 9x drills -Recording: M8 -right/left: rotating alternately -Drill distance: 32 mm -Quantity: 2 pieces available -Price: per piece Ndjdpfx Asb A R R Tobbod -Dimensions: 310/60/H135 mm -Weight: 8 kg

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Ndedpfowf Dpgjx Abbsd Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 11x drill -1x drill: clockwise 32 mm distance -Admission: M8 -right/left: rotating alternately -Distance drill: 32 mm -Number: 4 drill heads available -Price: per piece -Dimensions: 350/100/H90 mm -Weight: 5 kg Ndodpfx Asb A R H Tobbjd

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 19x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 32 mm -Number: 2x drill heads available -Price: per piece -Dimensions: 635/75/H100 mm Ndodpfjb A R Igjx Abbed -Weight: 10 kg

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Ndsdpsfy T Arsfx Abbed Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear Ndjdpfxeb A R Rhe Abbjd -Number: max. 9x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 32 mm -Dimensions: 140/125/H120 mm -Weight: 4 kg

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 10x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 32 mm Njdpfjb A R Rwox Abbedd -Dimensions: 350/95/H85 mm -Weight: 8 kg

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Ndedpfxsrc Dgmo Abbjd Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 7x drill -Admission: M8 Nedpfxsb A R Rrs Abbodd -right/left: rotating alternately -Distance drill: 32 mm -Number: 2 drill heads available -Price: per piece -Dimensions: 240/70/H80 mm -Weight: 6 kg

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear Njdpsb A R R Djfx Abbsdd -Number: max. 3x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 32/40 mm -Dimensions: 150/100/H100 mm -Weight: 3 kg

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, pressing force: 315 t, table width: 1,250 mm, table length: 900 mm, overall weight: 35,000 kg, stroke length: 129 mm, Equipment: safety light barrier, Press Müller 21ZE 250315-12,5.13.2 A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. Ndsdpfxjv Hqavj Abbed New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller 21ZE 250315-12,5.13.2 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 4x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 32 mm Distance drill: 15 mm -Number: 2 drill heads available Ndedob A R R Hjpfx Abbjd -Price: per piece -Dimensions: 200/75/H90 mm -Weight: 3 kg