Universal vertical milling head + special attachment

ORADEA / EURO-MILL FUS 32

Condition: used, Year of construction: 2001, grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control Siemens 840D passage width 1300 mm electro-magnetic table 4200 x 1300 mm grinding height 550 mm grinding motor 306 kW grinding motor turning speeds up to 370 U/min grinding motor feed, infinitely variable 0,5-35 m/min coolant flow rate 2000 l/min weight of the machine ca. 50 t dimensions of the machine ca. 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm Kedethumujpfx Aarodw - continuous: up to 5 mm/min stepless

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Ksdpowtnxnefx Aarsdw Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table length: 2,000 mm, Control: HEIDENHAIN TNC-426 Travel of the X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper tip: ISO 50 Ksdpfxevfr Hbo Aarjdw Speed range: 20 - 3000 rpm Spindle power: 17 kW

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t Keded N Smhspfx Aarodw +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2003, operating hours: 2,916 h, functionality: fully functional, machine/vehicle number: P 032B1591, workpiece weight (max.): 1,000 kg, feed length X-axis: 550 mm, feed length Y-axis: 370 mm, feed length Z-axis: 410 mm, feed rate X-axis: 900 m/min, feed rate Y-axis: 900 m/min, feed rate Z-axis: 900 m/min, continuous power (apparent): 13 kVA, feed length W-axis: 120 mm, The subject of the sale is a Fanuc Robocut Alpha-1iB EDM machine. The year of production of the machine is 2003. The machine has worked 2916 hours, including 178 hours of cutting. The machine has been described by the expert as efficient and in very good condition. Ksdpevwk Alsfx Aarsdw Axis travel: X: 550mm / 900 mm/min Y: 370mm / 900 mm/min U: 120mm / 450 mm/min V: 120mm / 450 mm/min Z: 410mm / 900 mm/min

Condition: like new (used), Year of construction: 2015, operating hours: 14,717 h, functionality: fully functional, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, workpiece weight (max.): 7 kg, total height: 2,247 mm, total length: 2,890 mm, total width: 5,193 mm, overall weight: 7,800 kg, CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 24 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pressure bar: 8 / 20 Equipment Chip conveyor Blowing air through spindle center selectable via M-function Signal lamp Tool measuring arm Workarea light Coolant gun Internal coolant supply Interface for Bar feeder Paper band filter Working time hours Under power: 36.049 Cutting Time: 14.171 Basic machine dimensions / weight Length mm: 2.890 Width mm: 5.193 Height mm: 2.247 Kdjdpfx Aaexdlynerew Weight kg: 7.800

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only Kedpot Ii Rrsfx Aarjdw -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 min. module total power requirement 10 kW weight of the machine ca. 5 t dimensions of the machine ca. m Kodet Hwwqepfx Aaredw

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. Kdedpfx Aajpy Elderjw In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to Kdodpfjftuywox Aarsw bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg