Thread rolling machine

PEE-WEE S-831

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Djdpoxf Ikljfx Addewf

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min Dwodpfxsv E R Eie Addof total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: good (used), turning diameter: 5,000 mm, travel distance Z-axis: 2,000 mm, turning length: 2,500 mm, The machine is in good technical condition, fully functional, modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm and a clamping plate diameter of 2500 mm. The workpiece weight is 40 tons and the height is 2000 mm. Djdpfxov Dkyko Addewf

Condition: good (used), Year of construction: 2015, Very good machine - precise and reliable... worked in 1 shift only (8- 10 hours per day) Dsdpfx Ajv Acphoddjwf

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Dwjdpfx Ajua Iw Teddjf Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Heidenhain TNC 640, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, table load: 200 kg, rotary table diameter: 380 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 36 bar, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses Djdpfx Adoq Tafxedewf -Full protection coolant cabin -Spindle oil cooler -Oil separator -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale)

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 495 mm, roller (top) diameter: 515 mm, side roll diameter: 355 mm, roller diameter: 495 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 60 mm, overall weight: 29,200 kg, total length: 5,770 mm, total width: 2,390 mm, total height: 2,760 mm, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Djdpfx Adjv Nhkwjdjwf

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Table size: 800 x 400 mm Dedpfxjv Irwro Addewf

Condition: good (used), Year of construction: 2008, functionality: fully functional, Control: OSP-P20L-R Swivel diameter over bed: 450 mm Swivel diameter over longitudinal slide: 350 mm Swivel diameter over cross slide: 300 mm Spindle bore: 43 mm Dwedevk Sqkspfx Addsf Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12-way Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader BREUNING IRCO

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] Dwjdpouhcbcofx Addof - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading