Gearbox

PIV Getriebe stufenlos

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock Fpjdpfx Adexn Aczsajd With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Fpsdorfw Nhepfx Adasd Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Fjdpfxovpgq Nj Adaspd Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Fodpfjgwlrdjx Adaepd Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Fsdpsyahv Sofx Adaspd Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor Fpjdpfxsvb Dcao Adaod *

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool Sharpening Machine Used Cutting Wheel Sharpening Machine, Grinding Machine, Cutting Wheel Sharpener Lorenz Type MS 80, year 1966, without coolant system, especially suitable for sharpening gear shaping cutters (cutting wheels), maximum shaping cutter diameter to be ground approx. 200 mm, maximum stroke of the grinding spindle slide approx. 50 mm, table clamping surface approx. 600 x 245 mm, table travel (longitudinal, manual) 250 mm, table adjustment (vertical, manual) 275 mm, with coarse and fine feed adjustments, suitable grinding wheel diameter 150 mm. With cutting wheel sharpening device MSV 75 for producing bevel profile grinding on straight-cut gear cutters. Driven by a worm gear motor. Supplied with operating manual. High-performance special machine for sharpening cutting wheels available at a favorable price. An on-site inspection under power is possible by prior appointment. Price €450 net ex location plus packaging costs. All technical details are subject to typing errors/mistakes. Sale exclusively to EU countries. Fpjdoffybgopfx Adaed

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 Fsdpfeg Stz Asx Adaepd RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Fpodsrpn Dvspfx Adasd Technical details shown on picture.

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Fpjdpfofbml Nox Adaed Weight in kg: about 13000