Clamping force tester (27945)

Prema max.Druck 100 MPa

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec Duedpfxji A S I De Afwep total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage and drives for external storage of data and images. hard disk for internal image storage and drives for external storage of data and images. This makes it possible to quickly and easily gain insights into the composition and morphology of morphology of specimen surfaces far into the sub-micrometer range. With magnification range from 5x to 300,000x, both macrostructures and microstructures can be examined. as well as microstructures is possible. Dsdpfx Afjfcwwnswjup The range of applications can be extended considerably by adding special accessories, allowing, for example analytical investigations in micro areas of the surface are possible. The device can be operated both via conventional switching elements and via the keyboard or mouse (add-on). or mouse (add-on). Electron optics and vacuum control are conventional. Functions of the Image memory functions are operated using the keyboard or mouse (add-on). A separate information screen is located centrally on the separate information screen for displaying the menus. These operating instructions are intended as a guide to help the user achieve the best possible results with the device. results with the appliance. The explanations have been kept as simple as possible so that even a less experienced user less experienced users the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Stages in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, untipped specimen 25 nm - guaranteed with tungsten cathode at 1kV, 6 mm working distance, untipped specimen 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, untilted specimen Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Duodod Eaukepfx Afwep

Year of construction: 2021, condition: new, Retrofit kit 2-axis digital display consisting of: Dusdpfx Afehcn Efewop FAGOR digital display with scales in Y- and Z-axis. Suitable scale holders f. HF50 Bracket for mounting the display behind the machine (see picture)

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Dusdpeyhhuwefx Afwsp Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Duodpfx Afjp S Sq Dewep

Condition: used, Electric trolley, electric trolley for chain hoist, crane trolley, trolley, rolling trolley For double T-beam STEEL type GU-A035400 . 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roller diameter approx. 80 mm track width from 65 mm to 110 mm driving speed 12,5 m/min Dodpfsl Ab Rtox Afwsup Motor power 0,42 kW Mains connection 380 Volt, 50 Hz. weight 20 kg good condition

Year of construction: 1995, condition: excellent (used), Grasso Screw Unit Amonia with 132KW motor/3000rpm with oil cooler Cap.= 641 KW at +0C°/+35C° Duedpfshryh Asx Afwep Flow rate= 611m3/h

Condition: repair required (used), Year of construction: 2002, operating hours: 6,000 h, functionality: not functional, machine/vehicle number: 158187, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller manufacturer: Fusion 640M, number of spindles: 1, number of slots in tool magazine: 30, Machine: Mazak VTC-300-C II Year of manufacture: 2002, Total spindle hours according to spindle monitor: 47,961 hours. A new spindle was installed, which now has 4,770 hours. Control: Fusion 640 M Travel distances: X-axis = 1,740mm, Y-axis = 760mm, Z-axis = 840mm Spindle: SK-40, 12,000 rpm Tool magazine with 30 positions Equipped with Renishaw probe Machine dimensions: Length = 4,150mm + 1,260mm chip conveyor, Width = 3,300mm, Height = 3,100mm Individual components can also be purchased (such as spindle, control cabinet, control unit, etc.). Djdpfxex U A Elj Afwsup The machine is currently defective and is suitable either for repair (costs approx. €4,500) or for dismantling for parts. For further questions, please feel free to call or send an email.

Condition: used, E-Chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS-control via crane system controller Dujdpfx Afsgd Ipnswjp make no.61456646 year of construction 2003 lifting capacity: 200 kg hook path: 4,0 meter Main hoisting speed: 14,0 / 19,2 m/min. Fine lifting speed: 0,20 m/min. chain size 4,2 x 12,2 mm 1 load strand = 200 kg - with control logic DKES2/5 500V - without crane control - Dematik BUS control via crane system control - without roller trolley Mains connection: 400 Volt, 50 Hz rated power: 750 W rated current: 2,4 A good condition