Hydraulic single column press

Raster PYE 40 S1

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Cedeyl Uh Sopfx Ai Ssrh Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine Cedjfv Awhopfx Ai Serh - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: good (used), Year of construction: 1999, Technical specifications Ø: 1100 mm Rectangular: 1300 x 1100 mm Csdpjv Tzxvjfx Ai Ssrh

Year of construction: 1995, condition: ready for operation (used), A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible. Crsdpewftcpjfx Ai Soh

Condition: used, Year of construction: 1995, faceplate diameter 4000 mm swing diameter 4300 mm turning height 1750 mm slide adjustment 1000 mm table load 18 t turning speeds 1-92 U/min Control Siemens type 840 D mm Rest 2 ram head dimension 250x250 mm Feed 1-4000 mm/min main gear-box motor 55 kW total power requirement 85 KVA weight of the machine ca. 64 t dimensions of the machine ca. 8x5,8x8 m The machine was overhauled in 2007. The machine is currently designed to machine rings, but can be converted again for machining large parts. Additional information Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Cedpsyquyfofx Ai Ssrh please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2002, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Crsdpfx Aonvfdqoi Ssh

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min Crsdozd Sqaspfx Ai Sjh * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: good (used), Year of construction: 1979, functionality: fully functional, center width: 2,840 mm, center height: 1,200 mm, center height in crank: 1,700 mm, spindle motor power: 28 W, spindle speed (min.): 5 rpm, spindle speed (max.): 540 rpm, quill stroke: 750 mm, feed force X-axis: 75 N, feed force Z-axis: 110 N, workpiece weight (max.): 3,000 kg, input voltage: 400 V, The machine is in good condition; the control cabinet was replaced 10 years ago. The machine is currently disassembled and stored in the warehouse. Crjdpfjy S A Tdox Ai Seh If required, we can install the machine and provide training.

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm Crjdpfx Ajw Smuksi Sjh total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: D-MS360, load capacity: 2,000 kg, working height: 3,000 mm, Abus 2000 kg column-slewing crane DC-Pro 2/1 H5 chain hoist - Outreach: 6 m - Lifting capacity: 2,000 kg - Lifting height: 3 m - Year of manufacture: 2007 Delivery, customisation, installation, inspection and commissioning are all possible upon request. Is this crane not exactly what you are looking for? We have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. Codpfxjz Dtc Us Ai Sjrh We sell, among other things: - overhead cranes - underslung cranes - column and slewing cranes - chain hoists - Demag KBK rails and accessories - travelling carriages Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl