Broaching Machine

Rausch RS4/1000

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Hfsdsw H Dgnjpfx Ahfjn Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: used, Year of construction: 1998, Technical details: Hodpfx Ahju Ngrqefsfn height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad Hfedpfx Asiqp Erohfon total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Hedjx Uw S Hopfx Ahfjfn Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm Hedpfxeu Iwyio Ahfsfn drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: new, Year of construction: 2026, - Capacity: 2070 x 6 mm - Electrically adjustable nip roller - Electrically adjustable bottom roller (material clamping) Hjdpfx Aslht N Ijhfofn - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Tapered rollers - Rotatable top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm Hsdpfx Asv Sdz Rshfjfn spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Hfsdew Dy Rqepfx Ahfon

Year of construction: 1963, condition: ready for operation (used), Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible. Hfsdpey A Smbjfx Ahfon

Condition: new, Year of construction: 2025, machine/vehicle number: SH-250, functionality: fully functional, pressing force: 250 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 8 mm/s, total length: 3,000 mm, total width: 2,000 mm, total height: 1,700 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Hfedpfx Ahswk Hkqjfon Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements.