WIG Welding Machines

Rehm INVERTIG PRO 350 AC/DC compact / 450 DC

Condition: used, Technical details: welding current: 500 A Hfedpfx Aowtctmol Djk weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings Hjdolb I Daepfx Al Dofk - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc Hfodpjw Rm Saofx Al Dok IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm Hfedpfxsvc Ax Nj Al Djk ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Hfsdeulc Ixepfx Al Dek Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: excellent (used), Tacchella Macchine grinding machine, type 40LR, in very good condition. Specifications: Longitudinal travel, X-axis: 400 mm Cross travel, Y-axis: 250 mm Hjdpfx Aljivg E Hs Djfk Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimension: 150x20 mm Weight: 800 kg

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Hfjdpfx Alevrz Rvj Dsk Overband magnet Irrigation

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Hfodpfx Aljk Sat De Dsk

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Hodedzqb Ejpfx Al Djfk Otherwise in good condition.

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 41 kW (55.74 HP), motor manufacturer: Toyota (1ZS), gearing type: automatic, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, tire condition: 100 %, front tire size: 7.00-12, rear tire size: 6.00-9, overall weight: 4,040 kg, color: orange, Equipment: CE marking, full service history, head guard, lighting, pallet forks, sideshift, === MAIN SPECIFICATIONS === Year of manufacture: 2023 Operating hours: 0 h (new) Max. lifting capacity: 2500 kg Max. lift height: 5.0 m (5000 mm) Mast type: Triplex (FSV – Full Free Lift) Free lift: Yes (Full free lift) Hfodpfxeynli So Al Djk Fork length: 1000 mm Sideshift fork carriage: Yes (Integrated sideshift, IIA class) Drive: Diesel Transmission: Automatic (Torque converter) Cabin: Open (Overhead guard) Tyres: Solid (SE – Super Elastic) Front tyres: 7.00-12 Rear tyres: 6.00-9 Engine manufacturer: Toyota 1ZS (3-cylinder diesel) Engine power: 41 kW Emission class: Stage IIIA Weight: approx. 4040 kg (with 5m mast) CE certification: Yes === HIGHLIGHTS === Triplex mast with full free lift (ideal for indoor use with low ceilings) Integrated sideshift with 3rd hydraulic function Heavy-duty 2.5-ton capacity Solid SE tyres for industrial applications Toyota SAS (System of Active Stability) === CONDITION === Brand new machine – unused. Fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable 2.5-ton diesel forklift equipped with a 5.0 meter Triplex (FSV) mast and full free lift, making it ideal for warehouse operations with limited ceiling height. Powered by the durable Toyota 1ZS diesel engine (41 kW), this model delivers strong performance, high efficiency and long-term reliability. With a rated capacity of 2500 kg at 500 mm load centre and integrated sideshift, the Toyota 52-8FDF25 is perfectly suited for logistics, construction and industrial material handling. Equipped with solid SE tyres and Toyota’s SAS safety system for maximum operational stability and safety. Fully inspected, CE certified and ready for immediate deployment. Spare parts and professional support available upon request. === DELIVERY === Crane loading available upon request. Flexible worldwide shipping options available. Transport professionally handled by Collé Rental & Sales.