Oilfree 3.7 kW SCROLL Compressor 10 bar

RENNER SLDK-NEO 3.7 S

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Ksdpfx Aef Dwa Ujfdsnb +++++

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 250 mm, Coating machine / brush applicator Manufacturer: Ceetec Type: A 250 Automatic coating machine with brush application Workpiece dimensions: Width max. 250 mm Height max. approx. 100 mm Length from approx. 800 mm The coating machine is suitable for applying paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical data: - electronic diaphragm pump (no compressed air required) - spray nozzles for all-round application of wood preservatives - 12 rotating applicator brushes on 8 axes (standard nylon bristles) for 4-sided application of coating materials Workpiece feed adjustable via feed roller, approx. 16-45 m/min. Capacity approx. 960 – 2500 meters/hour Power connection 3 × 380 V EU Machine weight approx. 350 kg The machine has been cleaned and technically inspected. Hose connections, diaphragm, and brush set have been renewed. Knodpfx Afsyuaptsdjb Ready for immediate use!

Condition: new, working length 2451 mm Working width 2170 mm Kodpfxji Hmpio Afdjnb Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: excellent (used), UNLOADER (SINGLE-CAGE) Ksdpfx Asd Tyvxsfdenb - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Knjdpjxpn Tnjfx Afdsb Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence Reconditioned: NEW=> hydraulic cylinders, air piping, safety guards This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Knjdpfx Afswh Rvrsdsb Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

Condition: used, machine/vehicle number: 008210, Max. panel width: 1000 mm Max. panel length: 2500 mm Kedpex A Thwjfx Afdsnb Length of conveyor: 10000 mm Panel return for edgebander: Right

Condition: excellent (used), HSS saw grinder WERKO Ksdoipid Tspfx Afdonb

Condition: used, machine/vehicle number: 006621, Max. panel width: 1500 mm Kodpfxotvrfgj Afdsnb Max. panel length: 2200 mm Length of conveyor: 13500 mm Panel return for edgebander: Left

Condition: new, Type DTW-120A Horizontal three axis Knedpfx Aod Tquiofdob Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m