Cryogenic tank rail cars,gas,wagons,CO2

Rheinstahl AG

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Dcedpfeh Eibaox Abzoh Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Dedpfx Abeqt Dmyszoch According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, 1 Used Concrete Batching Plant In excellent condition! Manufacturer: EUROMECC Model: EURO 5 MIX Year of manufacture: 2019 Theoretical capacity: approx. 60–75 m³/h Total production to date: approx. 95,000 m³ Aggregate storage in high silo / inline silo (reihensilo) • Capacity: 5 bins – each 45 m³ • 4 load cells (each 5,000 kg capacity) • Silo loading via feed conveyor belt • Truck feed via loading hopper (25 m³ volume) Complete plant with winter enclosure / insulation Mixers • 1x Planetary mixers with agitators • Type EUROMECC MEP 3000/2000 Dosing system • Aggregates: Weighing belt • Water dosing: 1 water scale 500 kg per scale • Admixture dosing: 1 admixture scale 2x12 liters • Cement dosing: 1 cement scale 1,000 kg per scale Control system • Operator/control container included • Main control system: ElettronData Cement silos – total: 6 units • 2x 150 m³ (Diameter: 4.6 m) • 1x 90 m³ (Diameter: 3.5 m) • 1x 45 m³ (Diameter: 3.5 m) Optional equipment: • Warm air heating system inside container • Chemical admixture storage in container • Rest concrete recycling system (optional) Condition: • The plant is in very good and fully functional condition. • AVAILABLE IMMEDIATELY • Location: Denmark Djdoxn A Nbepfx Abzoch • Price: on request Note: Offer is net ex-works, subject to prior sale. Errors, omissions, and/or misrepresentations excepted. No warranty or guarantee. Sold “as-is”, lying or standing. Any duplication, publication or reuse of this offer – in part or whole – is strictly prohibited.

Condition: used, mileage: 1,70,000 km, power: 70 kW (95.17 HP), first registration: 09/2012, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €5,690 Mercedes Benz Sprinter MAXI – Box van (SAXAS) Euro 5 Please, no email/do not email, as we can only process them sporadically due to time constraints! Thank you for your understanding! Opening hours and further information: Viewing/purchase possible without prior appointment: Viewing/purchase possible without prior appointment: No appointment necessary!!!! Mon - Thurs: 9:00 AM to 4:00 PM Fri: 9:00 AM - 1:00 PM Sat: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch: or our friendly staff. TÜV (technical inspection): Can be carried out upon request at the time of purchase. - Maintained according to service schedule / Service history - 1st owner - LED interior lighting - Motion sensor in the interior - Sliding door between the cab and the box - Rear view camera (see photos) - Various ventilation openings - Foldable shelves - Electrically locked doors - Rear step Loading area length: 4.40 m Loading area height: 2.00 m Loading area width: 2.00 m Special equipment: - Hill-start assist - Generator 220 A - Steering wheel (steering column mechanically adjustable) - Radio preparation - Front mud flaps - Rear stabilizer - Reinforced front stabilizer - Fleece battery 95 Ah Further equipment: - Adaptive brake light - Airbag driver side - Display for windshield washer fluid level - Exterior mirrors electrically adjustable and heated - both - Exterior mirrors with integrated turn signal - Battery 74 Ah - Brake assist - Braking system with ABS+ASR - Headliner in the cab - Lockable glove compartment - Body/superstructure: Box van - Fuel tank: Main tank 75 liters - Headlight range adjustment - Truck registration - Engine 2.1 L - 70 kW CDI - Wheelbase 4325 mm - Smoker's package - Tire repair kit with compressor - Low emission according to Euro 5 emission standard - Seat cover / upholstery: Fabric Lima - Service interval display Assyst - Heat-protective glazing - Permissible total weight 3.50 t If you have any questions: Christian Hirsch Please try again frequently as we are often in a customer meeting. Dsdpfx Abjxnvm Tozsch If you have any questions, please contact Christian Hirsch: or our friendly staff. If you have any questions: Christian Hirsch More offers can be found at / More offers can be found at / The equipment was determined with the help of a VIN query, errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale reserved.

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Dsdoucfwpjpfx Abzsch

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Dcedpfx Aboiy Dtbjzjh Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Available immediately

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Djdpfx Asd A Hbcebzsch Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Condition: excellent (used), mileage: 77,813 km, power: 59 kW (80.22 HP), first registration: 04/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,510 mm, fuel: diesel, color: grey, emission class: euro6, number of seats: 2, total length: 3,960 mm, total width: 1,720 mm, permissible axle load (axle 1): 960 kg, permissible axle load (axle 2): 960 kg, Year of construction: 2023, Equipment: Bluetooth, air conditioning, electric window regulation, navigation system, General information Number of doors: 2 Registration number: VVH-17-J Technical information Number of cylinders: 4 Engine capacity: 1.248 cc Max. front axle load: 960 kg Max. rear axle load: 960 kg Weights Empty weight: 1.325 kg Carrying capacity: 595 kg GVW: 1.820 kg Max. towing weight: 2.820 kg Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Radio Bluetooth Djdpfoyl Iv Nex Abzsch

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 Dcsdpfx Abovr Hgvozjh -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, x Dcsdpjip Rdljfx Abzeh x x dismantled x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++