El. heated sintering furnace

Riedhammer TP12,75/2x20/15-E-145

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Ijdpfeg Dgymex Alzsar Max. loading weight: approx. 2,5 t PLC: Siemens S7

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Ijdpeiryyasfx Alzoar Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Iaedpjtk It Sofx Alzor Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. Isdpjffamvjfx Alzjar :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: new, column width: 2000 x 1000retracting speed: 150weight approx.: 35.000stroke: 800total power requirements: 30daylight: 1000rapid traverse: 120pressure: 500: 2500 x 1500working speed: 12messurements (LxWxH): 2500x2700x5400 Iasdsd Aca Aepfx Alzjr

Condition: refurbished (used), Roller hearth furnace, make Mahler Iodpfx Alsfc Hbdezsar type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Year of construction: 2023, condition: ready for operation (used), An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible. Iasdpfxeulkums Alzer

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment. Iasdpfx Aljx Af A Hszor

Condition: excellent (used), Year of construction: 2006, operating hours: 53,244 h, functionality: fully functional, Technical Data – Gleason Phoenix II 600HC (CNC Hypoid Gear Cutting Machine) Working Area Max. workpiece diameter: Ø 600 mm Max. tooth depth: 24.6 mm Max. gear width: 110 mm Iajdpfx Aloxwzu Iezor Number of teeth: 1–300 Cutterhead size face milling (FM): 18" diameter Cutterhead size hobbing (FH): 210 mm radius Max. cutter spindle speed: 600 min⁻¹ Work Spindle Front taper diameter: Ø 203 mm Taper bore diameter: Ø 181 mm Bore depth: 884 mm Max. work spindle speed: 600 min⁻¹ Dimensions and Weight Footprint L × W × H: 4.4 × 3.5 × 3.5 m (incl. peripherals) Machine weight: 26,000 kg Connection Data Total connected load: 139 kVA Main fuse: 200 A Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC

Condition: excellent (used), Stratasys Type: Stratasys 3D printer PolyJet printer J750 Objet Stratasys 3D printer The Stratasys J750 3D printers allow you to optimize and streamline the process of producing models from different materials with one build platform in the same print job. In the design phase, the J750 3D printer (with CAD software) can be used to assign colors to parts of a model. The model can then be saved as a VRML file and printed with the desired colors. The Stratasys J750 3D printer has a build volume of 490 mm × 390 mm × 200 mm (19.3 x 15.35 x 7.8 in). AC connection 100–120 VAC, 50–60 Hz, 13.5 A, 1-phase Or 220–240 VAC, 50–60 Hz, 7 A, 1-phase Materials Agilus30 family Digital ABS Plus Tango Transparent Vero family Veroflex VeroUltra Opaque SUP705, SUP706 support material Applications Rapid prototyping Concept models Medical models Equipment and devices Colored textures Isdpjizah Ajfx Alzear Total printing time on the machine is approx. 1483 hours Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.