Shredder

Robust SD 90 XL/22 kW

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Todpfx Aey D E Tdof Aoc

Condition: new, Year of construction: 2026, The ball mill is ideal for mineral ores. Tsdepahwvopfx Af Ajc

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 850 mm - Machine weight: approx. 3500 kg - Tank capacity: approx. 110 liters - Hand protection grid in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitting table design - Documentation: 2 copies in German (1 printed, 1 on CD) - Color: RAL 5012 - light blue - Protective grid/knife beam: RAL 1028 - melon yellow Machine in stock and immediately available Price and further information upon request. Tedpfjgl Adzsx Af Ajc

Condition: new, - Motor power: 9 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue Tedpfegl Ac Ssx Af Ajc - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: Tedpfjftnt Nox Af Aoc - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite - Color scheme: Housing RAL according to customer requirements Protective guard/knife bar RAL 1028 melon yellow Made to order Price and further information on request.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Todpfxon Argis Af Aoc Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. Tedpfxjk S Dw Ej Af Aec The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Tjdoqmi Irspfx Af Aoc Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours Tedpfx Aeiq U D Eof Aoc

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler Tedpfsrhig Eox Af Asc - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg