Multi-spindle drill head

Romai KMSK 8/6 ST

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drilling head, drilling gearbox Hfodpfsdz A Trex Agwed -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Hfodsiypzdopfx Agwed Ready for delivery

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 2x available! x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Hedpfxjp S Sche Agwsfd Immediately ready for use Free loading, transport no problem.

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hfsdpfsq Ulucox Agwed Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Standard equipment: 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Hfjdolub Htepfx Agwjd Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Delivery time: ex stock Waiblingen Beinstein

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission Hedpfxsh Ic Ufj Agwefd - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm Hodpfxepxrkns Agwjfd control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Hodpfx Aetxquhsgwsfd

Condition: excellent (used), Year of construction: 2006, X-Y-Z Axes travel:520x320x350mm Fanuc control system BT30 10000 rpm spindle APC Automatic Pallet Changer System Pallet size: 650x440 mm IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers Hodpfenyh Sqjx Agwjfd *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hodpoh Hrvfjfx Agwofd Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++