Minigraver

Sany SY50U

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), fuel type: diesel, color: yellow, overall weight: 5,300 kg, empty load weight: 5,300 kg, operation weight: 5,300 kg, chain condition: 80 %, Year of construction: 2021, operating hours: 666 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Year of manufacture: 2021 Operating hours: approx. 666 Operating weight: approx. 5,300 kg Outstanding maneuverability. Impressively efficient. Big performance in a compact size. STANDARD EQUIPMENT: Yanmar engine, Stage V, approx. 40 HP, 145 Nm, 2,191 cc Load Sensing hydraulics, max. 110 l/min 1st proportional auxiliary circuit (GRL/hammer) on joystick 1 2nd proportional auxiliary circuit (grapple) on joystick 2 Swing brake 2 travel speeds Cylinder protection on the arm Bucket breakout force ISO 32.5 kN Stick digging force ISO 22.9 kN ROPS operator cabin Boom 2,700 mm, dipper stick 1,500 mm (L x H x W) 5,390 x 2,630 x 1,960 mm Dozer blade Rubber tracks 400 mm Ksdpfxox Ndcbs Adwswt Master battery switch

Condition: new, power: 79 kW (107.41 HP), fuel type: diesel, Year of construction: 2024, Empty weight: 16.600 kg Serial number: 7E6073 Rental currency: EUR Please contact KEY-TEC Sales for more information Kedpfx Adew Dx U Ijwswt

Condition: used, Year of construction: 2019, operating hours: 3,868 h, front tire size: 540/65R24, rear tire size: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMAND CENTER / AUTOTRAC / JDLINK-CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450SER CONTROL UNITS / MFWD FA- TLS WITHOUT BRAKES / 2-POSIT. STEEL RIMS FRONT / FRONT Kwsdpfxoulaxhe Adwot

Condition: used, mileage: 1,00,836 km, power: 122 kW (165.87 HP), first registration: 07/2006, fuel type: diesel, overall weight: 11,990 kg, next inspection (TÜV): 03/2026, color: yellow, gearing type: mechanical, suspension: other, number of seats: 4, Equipment: air conditioning, trailer coupling, Sunroof, top sleeper, single owner, rear-view camera, electric windows, radio/CD, outside temperature display, center armrest, diesel manual transmission, air conditioning, center armrest, radio/CD, 4 registered seats, electric windows, trailer hitch, rear-view camera, outside temperature display, walkthrough, top sleeper, 2–4 sleeping berths, seating area, storage cabinets, suitable for 4–5 horses, rear and side loading ramps, ramp limiters, windows in horse compartment, roof hatches, horse compartment interior height: 2.37 m, monitoring camera in the horse compartment, external tack room, saddle and bridle holders, permissible gross weight: 11,990 kg, single owner. FOR US, CONDITION AND GUT FEELING ARE DECISIVE, PRICE IS SECONDARY. If you have any further questions, Mr. Faller is happy to assist you at the following number. //*TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All details provided without guarantee.* For more offers, please visit our homepage: The description and listed data do not represent a guarantee and are not binding. The only binding agreement is the purchase contract completed at the dealership when buying the vehicle. Errors and prior sale reserved! Kedpfx Ajv Rp Umodwjwt

Condition: used, Year of construction: 2025, operating hours: 286 h, CLAAS Jaguar 940 Demonstrator machine 2025 Specification: Bestmarke – Driver Package: Comfort cab with A/C MATIC (automatic climate control and heating) electrically adjustable and heated rear-view mirrors LED service and access lighting DAB+ radio LED work lighting – Premium Cooling unit for L-sized storage box Kodpfjwfivrex Adwewt Sunblinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package – Large crop flow components and carbide counter blade Assistant Package: DYNAMIC POWER Camera system, prepared AUTO Fill trailer filling system V-FLEX 28 chopping unit, incl. maize knives MULTI CROP CRACKER SHREDLAGE L, 110/145 teeth, hard chrome plated Silage additive system with tank (375 l) and ACTISILER 37 electrohydraulic accelerator gap adjustment drive axle with differential lock Front tires 710/75 R34 front tire pressure regulation system Mercedes Benz R6-Cylinder OM471 LA (390 kW/530 HP) air horn rear-view camera with CEBIS display PROFI CAM QUANTIMETER yield measurement steering angle sensor STOP ROCK stone detector CAM PILOT steering assistant dynamic steering air brake system PickUp 300 Profi Contour | Internal No.: 11277163

Condition: new, fuel tank capacity: 465 l, operation weight: 27,000 kg, breakout force: 170 kN, The SY265C is in its element under tough conditions on the construction site. Its undercarriage and solid boom provide advantageous stability even when working at full power. Kwjdpfxegmthko Adwet

Condition: used, Year of construction: 2024, operating hours: 315 h, machine/vehicle number: 36373, fuel type: diesel, Empty weight: 3.425 kg Kjdpfsvf T Uysx Adwewt Lifting capacity: 250 kg Working height: 2.700 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1700 m Transport dimensions (LxWxH): 7.69x2.2x2.98 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. Kwedpjullmdofx Adwst * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Kodpfxov Evx Uo Adwewt Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Kwjdefz U S Espfx Adwot This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.