Wheel loader

Schäffer Hoflader Typ 2024

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Fsdpfxeufgnzj Afpjpi Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Fjdjt N Antspfx Afpspi Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: new, functionality: fully functional, Year of construction: 2026, Loading, unloading, loading dock, access, mobile ramp 10T ramp, 2M width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Ramp Grating: Galvanized grating with anti-slip grooves. Provides a secure and safe surface. Forklifts and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization and can be disassembled. ✅ Forklift Handle - installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in all directions. Specially designed handle allows maneuvering even in limited space. ✅ Chain for connection to a TIR truck, wagon, or fixed warehouse ramp: Solid steel chain is another advantage of our ramp, additionally secured to prevent ramp movement during loading operations. ✅ Sturdy side barriers: Protective barrier with the option to remove and install a frame/roof (roofing is optional). ✅ Electric height control for the ramp: Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V so it can be operated from a standard socket. Fpodpfopk Auqjx Afpei ✅ Dual-sided Manual Pump: Hydraulic pump for height adjustment in case of no access to electro-hydraulic power - dual lifting. This is an excellent solution for working in any conditions. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch Fodeu Nhh Topfx Afpepi - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: excellent (used), Year of construction: 2012, Kuka KR 240 R 2900 C Ultra Arm range: 2896mm Load capacity: 240kg Fjdpfx Afen R Nh Repopi Year of manufacture: 2012 Control system: KUKA KRC4 Robot designed for hanging

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional, with special coating: saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Dust extraction port 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German engineering Machine stand in aesthetically pleasing, modern, torsion-resistant, double-chambered, welded steel construction Upper and lower doors secured via limit switches Upper and lower precision band saw blade guides APA 2, size 1 Finely planed gray cast iron table Tilting table top up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Fence rail on the left of the saw blade, can be used Fence profile can be folded down Fpodpfx Afev Huggspei Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth spacing 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet Push-button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE compliant GS tested Machine stand, left-hand version Drive motor 1.5 kW / 2.0 HP Weight approx. 210 kg Availability: short-term Location: Flörsheim

Condition: new, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, color: orange, Year of construction: 2026, Equipment: all wheel drive, hydraulics, IRUS Crawler – Mowing, Mulching & Forestry Maintenance Model designation: various models Base price: €53,000.00 (smallest machine) Mowing & Mulching • Mowing on slopes and steep terrain (depending on model, up to approx. 60° incline) • Roadsides, embankments, levees • Solar parks, wind farms, utility corridors • Orchards & extensive grassland • Tall growth, shrubbery, blackberries (with flail mower) • Mulching instead of mowing → material remains on the ground and decomposes Forestry & Landscape Maintenance • Maintenance of reforestation areas • Removal of undergrowth in the forest • Keeping paths, aisles, and logging roads clear • Preparing areas for new plantations Municipal & Construction Applications • Railway embankment maintenance • Mowing along highways & federal roads • Operations in hard-to-reach terrain • Use on landfill or recultivation sites With Attachments (very important!) Fpedpfxjyim Uvs Afpoi Depending on the configuration, you can use e.g.: • Flail mower • Sickle bar mower • Rotary mower • Snow blower or snow blade • Sweeper • Winch • In some cases also rotary tiller / forestry mulcher This makes the IRUS Crawler usable all year round. ️ Operation & Safety • Radio remote control → work from a safe distance • Very low center of gravity → extremely stable on slopes • Ideal for locations where use of a tractor or manual labor would be too dangerous Cost-effectiveness • Saves labor time & personnel • Replaces manual brush-cutting • Especially interesting for: o Contractors o Municipalities o Landscaping companies o Forestry operations ✅ Rental & demonstrations available! We are happy to offer rental solutions and organize demonstrations (also on challenging terrain), to help you find the right IRUS Crawler including attachments for your application. Contact: Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog General Representative JCB Sales and Service Partner Hans-Grade-Straße 2 · 04509 Wiedemar Marlon Schütz – Sales Municipal Special Equipment

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,140 kg, lifting height: 2,530 mm, tire size: 31 x 15,5 -15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, hydraulics, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With a high lifting capacity of 950 kg, the H&R 2010 loader can lift even heavy loads to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the H&R 2010-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-B35 Farm Loader • Wide track for greater stability • Technically and visually optimized in-house • Manually adjustable pallet forks included • Standard 150 cm bucket included • Comfort cab with heating, ventilation, and radio • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted tools, 3rd and 4th control circuit • Trailer hitch for trailer use • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,672.00 VAT: €4,117.68 Gross: €25,789.68 € Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Fjdpfx Afsv Dachspepi Emissions class: Euro 5 Lifting capacity: 950 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2140 kg Speed: approx. 16 km/h Bucket width: 150 cm Standard tires: 31 x 15.5 - 15 Accessories and spare parts are in stock. Please provide us with your telephone number when making inquiries!

Condition: used, Year of construction: 2008, operating hours: 4,909 h, * Farm loader * Bucket * Hydraulic connections * Yanmar diesel engine -----Internal vehicle number: 10779----Errors and prior sale excepted. WhatsApp support available! Fedpfxswbyp Ij Afpepi If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, mileage: 1,25,560 km, power: 124 kW (168.59 HP), first registration: 01/1983, fuel type: diesel, number of seats: 32, gearing type: mechanical, Equipment: air conditioning, parking heater, * S 208 H * mechanical manual transmission * 124 KW / EURO 0 / diesel * EZ 05.01.1983 * L 7,600 / B 2,500 * Air conditioning installed - probably not currently working. * The vehicle was probably originally delivered in German-speaking countries, based on documents from the "80s". * Vehicle comes from southern Italy -> FRAME "CLEAN" * Manufacturer: Kässbohrer / SETRA * 124 KW / 5636 cc, engine OM 352 A * Mileage according to speedometer -> over 1 million km * Travel seats Fjdpfx Aotvczbofpopi * We would be happy to send you more photos if required. * etc. * Sale to businesses - * Unfortunately, sale to private customers is not possible. * ALL INFORMATION WITHOUT GUARANTEE * WE RESERVE THE RIGHT TO SELL PRIOR TO SALE