Complete Schüco Aluminium Profile Proces

Schüco PBX AL / PDG SET / PBA 3250

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 28,300 h, machine/vehicle number: 16500126, Press force: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis approach speed: 2000 mm/s Y-axis approach speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines. 2. ByVision software with a 22-inch LCD display and touch technology 3. Intelligent process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. 'Bend G2' – optical safety system with manual height adjustment 11. 6-axis backgauge (3 additional axes) Cjdpfx Ajwv N Naoddeaa 12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake 13. Ergonomic LED lighting package - Light output: 1500 lux 14. Ergonomic front supports with table. Max. load is 35 kg. 15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies). 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system. 17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations. 21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends. The machine is fully operational. In continuous use. Viewing and testing of the machine are welcome.

Year of construction: 2004, condition: good (used), functionality: fully functional, We have no more use from the machine and therefore its for sale. It is fully operational. The machine is in our ownership from 2007, regularly maintained and can be seen in our production hall in Croatia. Dismantile and load on truck are in price. Some other information: 4-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Cjdpfx Aewwtxneddoaa Max. working lenght: 7.200 mm 8 pneumatic clamps Tool magazine with 8 tools capacity Additional tehnical specifications available on request

Condition: new, Year of construction: 2025, Laser fiber cutting machine GEP Series A modern, fully enclosed fiber laser for sheet metal cutting. The offer includes a laser with a power from 1000W to 6000W, and the highest quality components ensure long and trouble-free use of the fiber laser. Fiber optics laser cutters constitute modern devices with many advantages. These are not only a perfect and more profitable alternative to the CO2 technology, but they also possess a lot of pros by themselves, such as improving the production by considerable margin and increasing its quality. FIBER technology allows for cutting sheets and other materials of various thickness: from very thin to very thick. The length of a wave in a FIBER laser is 1.064 micrometre long. The biggest advantages of the laser are failure-free optical fiber cable no elements that wear out the source of the fiber optic laser takes 1/3 less space high energetic efficiency - 100000 hours of work universal applicability (specific metal sheets, carbon and stainless steel, copper, brass, aluminium, titanium) Optical fiber laser increases the efficiency by 80% reduces the handling costs by 70% saves 80% of energy minimises the consumption of gas saves space in the workplace by 30% Technical parameters Caedpfxsizi S Ie Addja WORKING AREA 1500x3000 mm | 2000x4000 mm | 2000x6000 mm POWER 1000W 2000W 3000W 4000W 6000W POSITIONING REPEATABILITY ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min MAXIMUM ACCELERATION 1,5G DIMENSIONS 8850x2850x2310 mm POWER SUPPLY 400V 50Hz Safety and pollution Fully built-on laser Observational window with a laser protective glass compliant with the European CE marking The smoke produced by cutting can be filtered internally, and not pollute environment Sliding gate made of annealed aircraft aluminium The construction of the sliding gate is made of annealed aircraft aluminium, formed with a strength of 4300 tonnes, achieving unprecedented rigidity. Aircraft aluminium has many advantages: high rigidity (higher than cast iron), small mass, resistance to corrosion and oxidation as well as susceptibility to machining. Replaceable working table Replaceable working table consists of upper and lower platforms, whose movement and swapping are controlled through the controller. The machine can swap the platform in 15 seconds. Welded bed made of rectangular profiles The inner structure of the bed adopts a metal honeycomb structure which is welded by a plurality of rectangular tubes. Inside the tubes, stiffeners are placed to increase the strength and tensile strength of the bed, and also to increase the strength and stability of the guide rail to effectively avoid deformation of the bed. RayTools head Automatic focus regulation – Autofocus – The software automatically regulates the focusing lens during cutting metal sheets of various thickness. The speed of automatic focus regulation is 10 times higher than the speed of manual regulation. Greater range of manual regulation – The range of regulation -10mm - + 10 mm, precision of 0.01 mm is useful in when it comes to materials of different thickness (0–20 mm) – Below 1500W. Long durability. Collimating lenses and converging lenses possess a heat sink which cools down water, in turn decreasing the temperature of a cutting head, in order to improve the durability of the cutting head. The laser uses components from world producers

Condition: new, Year of construction: 2025, Laser fiber cutting machine GEP Series A modern, fully enclosed fiber laser for sheet metal cutting. The offer includes a laser with a power from 1000W to 6000W, and the highest quality components ensure long and trouble-free use of the fiber laser. Fiber optics laser cutters constitute modern devices with many advantages. These are not only a perfect and more profitable alternative to the CO2 technology, but they also possess a lot of pros by themselves, such as improving the production by considerable margin and increasing its quality. FIBER technology allows for cutting sheets and other materials of various thickness: from very thin to very thick. The length of a wave in a FIBER laser is 1.064 micrometre long. The biggest advantages of the laser are failure-free optical fiber cable no elements that wear out the source of the fiber optic laser takes 1/3 less space high energetic efficiency - 100000 hours of work universal applicability (specific metal sheets, carbon and stainless steel, copper, brass, aluminium, titanium) Optical fiber laser increases the efficiency by 80% reduces the handling costs by 70% saves 80% of energy Cajdpfoiznlyox Addoa minimises the consumption of gas saves space in the workplace by 30% Technical parameters WORKING AREA 1500x3000 mm | 2000x4000 mm | 2000x6000 mm POWER 1000W 2000W 3000W 4000W 6000W POSITIONING REPEATABILITY ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min MAXIMUM ACCELERATION 1,5G DIMENSIONS 8850x2850x2310 mm POWER SUPPLY 400V 50Hz Safety and pollution Fully built-on laser Observational window with a laser protective glass compliant with the European CE marking The smoke produced by cutting can be filtered internally, and not pollute environment Sliding gate made of annealed aircraft aluminium The construction of the sliding gate is made of annealed aircraft aluminium, formed with a strength of 4300 tonnes, achieving unprecedented rigidity. Aircraft aluminium has many advantages: high rigidity (higher than cast iron), small mass, resistance to corrosion and oxidation as well as susceptibility to machining. Replaceable working table Replaceable working table consists of upper and lower platforms, whose movement and swapping are controlled through the controller. The machine can swap the platform in 15 seconds. Welded bed made of rectangular profiles The inner structure of the bed adopts a metal honeycomb structure which is welded by a plurality of rectangular tubes. Inside the tubes, stiffeners are placed to increase the strength and tensile strength of the bed, and also to increase the strength and stability of the guide rail to effectively avoid deformation of the bed. RayTools head Automatic focus regulation – Autofocus – The software automatically regulates the focusing lens during cutting metal sheets of various thickness. The speed of automatic focus regulation is 10 times higher than the speed of manual regulation. Greater range of manual regulation – The range of regulation -10mm - + 10 mm, precision of 0.01 mm is useful in when it comes to materials of different thickness (0–20 mm) – Below 1500W. Long durability. Collimating lenses and converging lenses possess a heat sink which cools down water, in turn decreasing the temperature of a cutting head, in order to improve the durability of the cutting head. The laser uses components from world producers