Multispindle lathe

SCHÜTTE AG20

Condition: used, Multispindle lathe SCHÜTTE AG20 Dodozx Hl Ijpfx Aptocl

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Djdpfxogi Dl No Aptocl Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Dodpfx Ashrihyoptjcl

Condition: used, Multispindle lathe SCHÜTTE AG20 Dedpozhcqrsfx Aptscl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. Dedpfxjzlutms Aptecl The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h Dedpew Nqu Aefx Aptscl The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, Year of construction: 2013, Chip conveyor Manufacturer: BMF - BÜRENER, with filter system and high-pressure pump. Dcodpfx Aoiicnkoptel Dimensions of chip conveyor: Inlet width: 600 mm, inlet height: 200 mm, conveying length: 3000 mm.

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Dcsdpjtqfq Usfx Aptol

Condition: excellent (used), Year of construction: 2019, 3 x Miyano ABX-51SYY2 Years: 2016, 2018, 2019 Alps ASR RX45/51EV automatic bar feeder Fanuc 31i-B CNC Control Swarf coveyor Twin Spindles Twin Independent 12 Station Turrets Full Y-Axis on both Turrets Driven Tooling T Thermal Compensation Dcsdpfx Apszq Aqdetol Tooling package Operating manuals Service history (where available) Barloader Alps Tool ASR RX 51Ev Machines available in October 2026

Condition: ready for operation (used), Year of construction: 2005, spindle bore: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 80 mm Dcedpow Rcamsfx Aptsl - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° TOOL TURRET 1 - Number of stations: 10 - Number of live stations: 4 - Driven tool speed: 6,000 rpm FRONT TOOLING - Number of positions: 4 SUBOPERATION TOOLING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2,050 kg ACCESSORIES - Control unit: Fanuc 31i - Guide bushing - Parts removal - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer