Precision turning lathe

Schaublin

Condition: used, Tip height 125 mm Tip width 500 mm speed 45 - 3000 rpm feed rate 4 - 260 mm/min spindle nose Camlock D1-3" Bodpfx Afsbzlgljhscu Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over cross slide 120 mm top slide travel 100 mm cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) Bcsdpfxeu U Naro Afhsu length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Bodsbxkl Tjpfx Afhscu Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Condition: excellent (used), - Steel holder Multifix "B - Quick release collet device Bcedpfohmkh Tex Afhju center height 150 mm center width 630 mm spindle bore 40 mm speed (stepless) 55 - 3000 rpm feed rate 0,05 - 0,35 mm/rev inner taper spindle / tailstock MK 5 / MK 3 turning diameter over cross slide 177 mm turning diameter over bed 340 mm power 4.45 kW dimension 1730 x 970 x 1300 mm Weight 1250 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 Bcjdjup Hwxjpfx Afheu - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Bcodjtzxh Topfx Afhsu

Condition: used, turning diameter over bed 310 mm turning dia. over slide 160 mm control BOSCH CNC ALPHA 2 centre distance 340 mm centre height 148 mm spindle tunring speed 3.000 U/min x-axis 220 mm Bjdew Sx Ucjpfx Afhocu z-axis 400 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Pillar drilling machines Bsdpfsb N Ezrsx Afhocu

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, total height: 1,840 mm, overall weight: 3,040 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 4, This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information. Additional equipment • Machine supplied with manuals and CE conformity declaration Machine Benefits Technical Machine Benefits Bedpfeyalqgox Afhocu • Driven tool stations: 12 • Max tool size: 20 x 20 mm • Driven tool speed: 30 – 6000 rpm • Tailstock a2-3 • Possibility to mount 3-jaw chuck: yes • Recommended max turning diameter: 200 mm • Coolant system: tank capacity 180 l, pump capacity 20 l/min, pump pressure 6 bar • Max turning diameter: 300 mm • Recommended max turning diameter: 250 mm • Equipped with y-axis and sub-spindle Extra Information Machine still under power Dimensions Machine Depth 2650 mm

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. Bodpfox Upugox Afhscu X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: excellent (used), Year of construction: 2005, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: U-HD 800 Heating surface approx.: 14 m² Previously operated with: 640 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.05 bar Water content at normal level approx.: 748 l Total water content approx.: 1,108 l Bcodewwt D Djpfx Afhsu Year of manufacture: 2005 CE marking: CE 0036 Equipped with Weishaupt combination burner gas & oil type GL3/1-E, ZMD, gas control section, control cabinet, feed water pump and existing coarse and fine fittings.

Condition: excellent (used), Center height 125 mm Distance between centers 500mm Bjdpfxelyrcie Afhocu Spindle speeds 40-3000 rpm Several accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1999, operating hours: 17,282 h, functionality: fully functional, machine/vehicle number: 341671, Schaublin 180-CCN for sale Bcjdjyb Rwnjpfx Afhou

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Bodpstwliwofx Afhocu Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm Bjdpfx Aewvq Tmjfhscu >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.