Vertical Turret Lathe - Single Column

SCHIESS-FRORIEP 27 DE 250 - Retrofit

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 SP Ncjdpfox Dbydsx Aflew Model: TM500 8P Year of Manufacture: 1979 Chuck diameter: 6300 mm Max. turning diameter: 15000 mm Max. workpiece height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Max. workpiece weight: 80 tons Side tool post section: 360x360 mm Side tool post travel: 2500 mm Machine weight: approx. 230 tons Video available Milling and hobbing heads available

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Njdpfx Ajt T Rkdoflecw Table 1000 x 1000

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height Ncsdpskwcdbsfx Aflsw 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year Njdsvm Eixopfx Aflscw MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, Ncjdov N Uuvepfx Aflsw HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: new, ZEATZ NC rotary tables, PHV series – available for short delivery times The ZEATZ NC rotary tables from the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines with HEIDENHAIN or SIEMENS control systems ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load-bearing capacity for heavy workpieces Why ZEATZ: ZEATZ stands for innovative NC rotary table solutions with the highest precision and reliability. Thanks to robust construction, backlash-free drive systems, and state-of-the-art control technology, the rotary tables are ideally suited for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless turning, and interpolative machining in a single setup Sizes: Faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional square clamping surfaces also available) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Nsdpfxom Tvz Ds Aflecw Integration: Compatible with HEIDENHAIN and SIEMENS control systems Your advantages: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast supply of spare parts ✔ Support for integration and commissioning ✔ Numerous reference projects available in Germany

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Njdolhwr Rjpfx Aflscw Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for the production of automotive and other high-precision and complex 3D components. The system offers 25% more processing area than machines with the same concept. For flawless cutting performance, the powerful machine body and rotary table provide the best quality. Thanks to the easy-to-use design, you can save time. Due to components from well-known manufacturers and high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. With this technology, you will have lower energy consumption and can increase your company's profits. The machine is impressive due to its speed, reliability, and design. HD-FA Technical Data Available in 2, 3, and 4 kW X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360° Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm Njdpfeg Adknex Aflocw MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm, h= 3700 mm Working area: 9,000 mm x 10,000 mm (Safe area) Distance of rotary table door: 4,000 mm Machine weight: 16,000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19-inch touch screen Filter Capacity: 2,500 m³/h - 4 kW

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm Nedpfxsyb S Rij Aflscw max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: used, Year of construction: 1992, grinding length 0800 mm Nsdjwgnz Ajpfx Afljcw grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!