Autoclave for laminated glass production

Scholz Autoklav

Year of construction: 2010, condition: excellent (used), controller manufacturer: SIEMENS, controller model: S7-1500, temperature: 250 °C, year of last overhaul: 2021, CONTROLS .. electronic controls SIEMENS S7-1500 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 250 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: tempering .. heat treatment medium: water .. temperature max.: 250 °C .. length: 8000 mm .. width: 4300 mm .. diameter: 4300 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 15000 mm .. space requirements -front/back-: 6300 mm .. total height: 6600 mm .. height above floor level: 5500 mm .. height under floor level: 1100 mm .. total weight approx.: 60000 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Ndjdexyvy Rspfx Abusd Electrically upgraded in 2021 (Siemens). - Has an aviation and aerospace certification. - Complete documentation of all calibrations - Monitoring system for temperature and pressure zones Operating temperature: 250 °C Operating pressure: 12.5 bar Operating hours: - Vacuum pump: 9,132 h - Fan: 15,497 h

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range. Nodpoucdqnsfx Abujdd

Year of construction: 2010, condition: used, working temperature 250 °C working pressure 12,5 bar workpiece diameter 4.300 mm workpiece length 8.000 mm weight of the machine ca. 60 t SCHOLZ AUTOKLAV - 4300 x 8000 for the curing of components made from composite carbon fiber mats (PREPREG). The Autoclave was electrically refurbished in 2021. It is certified for use in the aviation and aerospace sectors. Furthermore, a complete and uninterrupted calibration record is available up to the present day. The autoclave is equipped with a monitoring system for temperature and pressure zones. Operating hours: - vacuum pump: 9.132h - fan: 15.497h The Autoklav is in very good condition and can be inspected under power at any time in the Swiss factory location (aviation company). Ndodpfewfc Sasx Abuod The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 4300x8000 | 4.300 x 8.000 | 4.300x8.000

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Ndjdpfovx Tmcox Abued Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] Ndodsuhantjpfx Abusd - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that installation be carried out by trained personnel only. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 7.5 kW 3 x 190 - 208/380-415V/220-240V 50 Hz incl. gas ballast in B-cover incl. level switch cooler reduced Nsdjipu Umjpfx Abuedd Ultimate pressure with open gas ballast: 1,5 mbar Ultimate pressure with closed gas ballast: 0.82 mbar Subject to prior sale! This offer is only valid for customers within Germany and European countries!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, HEGLA, ProLam 46 LTR-TD Combined Cutting Line for Laminated (VSG) and Float Glass Year: 2014 In very good technical condition. Inspection is possible by appointment. Njdpfsv I Ed Eox Abuedd Available: NOW

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. Ndodpfsu T N Efsx Abuod The machine is in very good condition.

Condition: used, Year of construction: 2010, x-travel 730 mm y-travel 730 mm z-travel 730 mm control Matrix Nexus Mazatrol Main spindle: turning speed range - main spindle 35 - 18.000 min/-1 power capacity - milling spindle 35 / 26 kW tool taper ISO 40 DIN 69871A transmission ratio 2 pallet changer: numbers of pallets 6 (5+1) size of pallet 500 x 500 mm max. workpiece weight 700 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm change time of pallets 7 sec B-axis (table) 0,001 ° Tool-Presetter: number of toolpositions 160 pos. tool taper ISO 40 DIN 69871A max. tool diameter 95 mm max. tool-dia with free toolbox 150 mm max. tool length 420 mm max. tool weight 12 kg change-time tool to tool 2,7 / 3,2 sec feeds: rapid traverse 60 m/min feed speeds max. 60.000 mm/min total power requirement 78,5 kVA weight of the machine ca. 16,4 t dimensions of the machine ca. 7,5 x 3,5 x 3,0 m CNC - MachiningCenter Horizontal MAZAK - Nexus 5000 II Nedpfxoup H Dro Abujdd - palletchanger 6(5+1) pos. - WITHOUT tools

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 Njdpfx Abogllxgjuedd - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)