HSM - milling cutter for graphite

Seagull + Cimtrode Gemischt

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen Dedpfx Ajylw Stea Nocg • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Dcsdpfx Aaevvlmcj Neg Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 Dcjdpfsycuuysx Aa Nsg • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: excellent (used), 5-axis Year of production: 2018 Dcsdpfeun Rqgjx Aa Nsg Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-live machine) Dodpohtrdyjfx Aa Necg Technical data: Adjustment travel: 450x300x300mm workpiece clamping table 820x400mm tank size 900x520mm filling height 300mm distance table/electrode holder 150/450mm workpiece weight max. 800Kg Dielectric max. 700l dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz power consumption 6,7 KVA Equipment: Color: new painting light grey + telegrey New control cabinet New control APC910/2 (win10) User interface MF30 V 2.8 New drives B&R with Endat interface Screen touch screen Generator exopuls+ 60A Rev.4 WZW 5-fold Touch protection operable via push button Linear scales in all axes X, Y, Z (Fagor) cartridge filter 2 pieces Cooling unit Termogamma Complete new machine installation New ball screw, bearing, coupling Maintenance unit with digital pressure switch Valve island Co² extinguishing system C-axis Hirschmann 50/min., holding brake Refurbished Manual control bar with enabling button Lowering tank automatic tracking chuck Erowa IST, Hirschmann, 3R Warranty 12 months Transport commissioning on site training

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 130 kg, grinding length: 1,500 mm, grinding wheel diameter: 500 mm, total width: 2,155 mm, total length: 5,465 mm, total height: 1,700 mm, grinding diameter: 300 mm, grinding wheel width: 63 mm, The cylindrical grinding machine was fully overhauled in 2021 and has hardly been used since. The condition of the machine is practically like new. Dsdsx A Dfyepfx Aa Necg Equipment as shown in the photos. The machine is connected to power and can be inspected at any time by prior arrangement. Technical specifications: Grinding diameter: 300 mm Grinding length: 1500 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Dcedpfxev Hxbbj Aa Nsg

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Dedpfevygwwox Aa Nscg Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2026, A 220-liter top-loading sandblaster with telescopic cylinders is a device for sandblasting and cleaning surfaces from rust, paint, greasy deposits and other impurities. The top opening significantly improves the ergonomics of working with heavy details. It is standardly equipped with a set of nozzles, a gun and glass protection stickers. A sandblaster is an essential tool in the metal, automotive, construction and shipbuilding industries. Thanks to its capacity and the stream of sand to the type of surface, the sandblaster ensures quick and effective cleaning of surfaces. The KDP220TOP sandblaster is a top quality product. It provides users with long and reliable work, and what is more, it enables quick and effective cleaning of surfaces of various types of elements. Equipped with an upper opening on telescopic actuators, it significantly improves work ergonomics and makes it easier to load heavy elements, and the capacity of 220 liters enables effective cleaning of larger surfaces in a short time. Advantages of our sandblaster model Complete for immediate use Convenient sandblasting gun with 4 replaceable ceramic nozzles Large, stable front door with rubber seal around the perimeter for safe and dust-free operation Telescopic actuators for increased work comfort High-quality rubber gloves integrated with the device Vent connection Efficient lighting of the workspace 4 pieces of replaceable protective film for the window, visor Sand blasting hose placed at the bottom of the collection container Adapted to work with various abrasives Drain hole allows for quick change of blasting material Ease of use, reliability and work safety Technical parameters Technical parameters of KDP220TOP AIR REQUIREMENTS 400-700 L/min ALLOWABLE PRESSURE 8 BAR AIR CONNECTION 1/4" quick connector ABRASIVE TANK CAPACITY +/- 18kg Dcjdevzqf Ujpfx Aa Nog SUCTION CONNECTION (venting) 63mm VIEWFINDER AREA 540x250mm FRONT HEIGHT 370mm INTERIOR CABIN DIMENSIONS (LxWxH min-max) 840x550x370-550mm EXTERNAL DIMENSIONS OF THE CABIN (LxWxH min-max) 890x560x1118-1380 mm WEIGHT 49kg Technical parameters Technical parameters of the extraction unit MODEL DC23 TENSION 220V POWER 1200W UNDERPRESSURE >12Kpa INPUT DIAMETER 45mm CAPACITY ~16l Standard equipment Work area lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality rubber work gloves, integrated with the device 2 suction (venting) connections with a diameter of 63 mm and 90 mm, enabling the connection of a suction device Sandblasting gun with 4 replaceable ceramic nozzles in sizes: 4, 5, 6, 7 mm 4 pcs. of replaceable protective film for window, visor Upper door with rubber seals around the perimeter to ensure dust-free operation Stable grid on the processing field Instructions in Polish Dust Extractor DC23 Connecting hose approx. 2m Bag filter We kindly inform you that the device requires self-assembly. Manufacturer: Cormak

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm y-travel: 1000 mm z-travel: 750 mm table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t with CNC HEIDENHAIN TNC 426 Dedpfx Aevptmwea Nscg 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders *