Stainless steel housing for a vacuum furnace

Seco Warwick

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 400220/659/2017, functionality: fully functional, temperature: 650 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, Warwick dry nitriding furnace, in very good condition, like new. Nlodpfxjy Eg U Ee Akfoa

Condition: good (used), Year of construction: 2000, table length . mm table width . mm burner heads . 2 total power requirement . kW Njdpfx Asqn A Ryjkfola weight of the machine ca. 1478 KG

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Njdsx Tbf Ujpfx Akfsla Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t Nsdpfx Akeg Dgymjfola PLC: Siemens S7

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Nljdpfjw Emyzjx Akfja

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day Nlodpfx Aovhctwokfja - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V Nodpfxothr Ncj Akfjla output 3 kw range - high tensile Innen 295x230x125 mm

Year of construction: 2025, condition: new, Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T; max. bulk bag size: L1200xW1200xH1700mm; machine dimensions without side crane: L1740xW1740xH5400mm; - Specification of the vacuum pump: Capacity: max. 5000kg/h; power: 380V, 5.5kW; hopper diameter: 650mm; discharge diameter: 420mm; height of vacuum pump: 1800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Njdpfev Nk Dasx Akfjla Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor Nledpfepag R Rex Akfoa 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Nsdpfx Aksw Ifl Tsfola Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Brand new machine, made in Italy Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.