Panel-Drilling Machine

Serrmac FDR 18

Condition: not inspected (used), Trapani a colonna Ijlhccqeuau Sdstotf

Condition: excellent (used), CATALOGUE NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm - max disc diameter 300mm - disc hole diameter 80mm - min. element length 630mm - max. element width 600mm from above: - pneumatic clamp - pawls - metal pressure shaft 2pcs - pawls - shaft with saws - smooth pressure shaft - pawls - smooth pressure shaft from below: - metal, pulling, toothed shaft 2pcs - pawls - caterpillar - shaft with saws - caterpillar - smooth feed speed regulation on the inverter - main motors 2x55kW - 4kW feed motor - hydraulic lifting of the body up/down - hydraulic adjustment of the shafts with saws - 0.37kW pump motor - central lubrication - diameter of the exhaust port 1x300mm, 1x380mm - dimensions length/width/height 3200x2350x2000mm - weight about 5500kg ADVANTAGES - Italian production - two-shaft - used multi-saw, very good condition Itjlheqy H Euoccqtof Net price: PLN 238,900 Net price: EUR 56,100 Net price calculated according to the exchange rate of PLN 4.25/EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: used, SERRMAC SERR-MAC Type TMF 32 3-Station In-Line Drilling and Tapping Machine Manufacturer No. 985080, Year of Manufacture 1999 Drilling Capacity 32 mm Table Size 2000 x 330 mm Thrust 270 mm Drill Head Spacing 1000 / 500 mm Drill Head Left: MDR 32 Spindle Mount MT 4 Quill Stroke 60 mm Spindle Speed 64 - 1720 rpm 12 speeds Motor power 2.2 kW Itslhcswb Hxpjcqtof - Thread cutting device via guide cartridge, 1 guide cartridge with 1 mm pitch - Spindle speed with 12 gear steps - Drill head height adjustment via rack and hand crank Center drill head: MK 3 spindle mount Quill stroke 130 mm Spindle speed 100 - 1650 rpm, continuously variable Motor power 0.92 / 1.5 kW - Spindle speed with 2 motor speeds and continuously variable via variator gear - Automatic feed 0.05 / 0.1 / 0.2 mm/rev - Drill head height adjustment via rack and hand crank - 1 RÖHM keyless chuck Ø 0.5 to 13 mm Right drill head: MK 3 spindle mount Quill stroke 130 mm Spindle speed 100 - 1650 rpm Continuously variable Motor power 0.92 / 1.5 kW - Spindle speed via 2 motor speeds and continuously variable via variator gear - Automatic feed 0.05 / 0.1 / 0.2 mm/rev - Thread cutting device - Drill head height adjustment via rack and hand crank - 1 RÖHM keyless chuck Ø up to 16 mm Power supply 400 volts, 50 Hz - Coolant system for all 3 drilling stations Space requirement L x W x H 2320 x 1100 x 2300 / 2930 mm Weight 1500 kg Very good condition

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm - Drill spindle speed: infinitely variable rpm - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via gear rack and hand crank Itolhccqjv Uy Npjtof - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise - Keyless drill chuck: 1-13 mm - Lighting

Condition: new, Drill Drill SERRMAC TCS E TC ( Cross Table ) New " CE " 3 years warranty Automatic descent High efficiency transmission and electronic speed variator Iteljfh Si Uohccqtof by vector inverter. Tool cooling system Threading via inverter and complete with digital tachometer Threaded spindle axis for tool clamping CM4 Cross table mm 800 x 255 Drilling capacity on steel R50 mm ø 50 Tapping capacity on steel R50 mm M 26 CM4 Spindle Cone Spindle stroke mm 145 Spindle sleeve diameter mm 72 Automatic descent rpm 3 speed: 0.05 - 0.1 - 0.2 Automatic descent with electrom. clutch. 3 speeds: 0.05 - 0.1 - 0.2 mm/rev. Prismatic Column Table cross Inverter Transmission I Spindle speed rpm 45 - 2150 Motor power (380 V - 50 Hz) kW 3 T-slot size mm 14 14 Table cross: long run. X axis manual mm 585 Cross table: manual transversal travel Y axis mm 240 Dimensions (h x w x d) column mm 1.986 x 1.340 x 1.280 Weight Kg 780

Condition: good (used), Year of construction: 2007, Drill, pillar drill, column drill, column drill -Manufacturer: Serrmac Ielhcotzf Rzecqtstf -Type: F 28 -Engine: Lafert 1.1 kW -Speed: 250 - 2200 rpm, continuously variable right-left rotation -Table size: 290 x 190 mm, travel 635 mm -Spindle holder: MK3 -Spindle stroke: 120 mm -Projection: 205 mm -Column Ø: 100 mm -Dimensions: 720/410/H1860 mm -Weight: 167 kg with pallet

Condition: used, Year of construction: 2001, Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270 Iolsl Hx Ecshccqtstf

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1 year warranty 48V 5PZS 775AH REMA 320 A plug installed - alternative plugs can be converted by arrangement including Aquamatik for automatically filling the cells with distilled water Test date 2024 Islhovnrwfoccqtetf Dimensions: 832 x 631 x 785 mm L/W/H Weight: approx. 1,120 kg Capacity: min. 90-100% (C5 protocol is included with delivery) Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side change Linde E 18 - 386-02 - side change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side change Linde EG 16 H - 1275-02 - side change Linde EG 16 P - 1275-02 - side change Linde EG 16 PH - 1275-02 - side change Linde EG 20 PH - 1275-02 - side change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 and more... All common battery sizes available.

Year of construction: 2008, Condition: used, Decorate Barbie House GL 18 Closure for medicament flat GL18 Injection form with 10-speed Itsledqbzqjhccqtjf

Condition: good (used), The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schäfer type: LF 511 G ZW design: recessed grip on one side Groove: f. partition walls color: blue Material: polypropylene outer dimensions LxWxH: 500x156x143mm inner dimensions LxW: 448x123mm Useful height in stack: 127 mm Dimensions front wall opening: 85x60 mm (WxH) Capacity: 7.60 liters Stackable: yes Weight | pc: 0,785 kg Remark: These are used stacking boxes. Islhcsn Dw Tvjcqtotf There may be scratches, soiling and color defects may be present. Application: The open fronted storage boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, Precise, quiet and reliable drill press. Built to strict accident prevention standards. Precision spindle axis with tempered morse taper, base plate machined. Electronic speed variator included. Rotary table + vise mm 350 X 250. Drilling capacity on steel :R50 mm ø 22. Tapping capacity on steel :R50 mm M 14. Ijlhcceir Aihoqtotf Spindle taper :CM2 Spindle stroke :mm 90. Spindle sleeve diameter :mm 52. Column diameter :mm 98. Spindle center column distance :mm 201. Transmission PU Electronic variable speed drive (E). Spindle speed :Rpm 270 ÷ 4,200. Motor power :kW 0.75 / 220 V Single phase. Dimensions :( h x w x d ) mm 1950 x 600 x 680. Weight :Kg 220.

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1 year warranty 80V 3PZS 465AH REMA 320 A plug installed - alternative plugs can be converted by arrangement including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: 1,025 x 564 x 784 mm (L/W/H) Weight: approx. 1,240 kg Capacity: min. 90-100% (C5 protocol is included with delivery) Linde K - 5231-00 Linde K - 5231-00 - side change Linde K 12 - 02 - 148-00 Linde K 15 - 148-00 Ieljvnmlwehccqtjtf Linde P 120 - 5007-10 - side change Linde P 120 - 5007-10 - vertical change Linde P 180 - 5007-10 - lateral change Linde P 180 - 5007-10 - vertical change Still MX 13 Still R 60-15 Still R 60-16 Still R 60-18 | Still R 60-20 Still RX 60-16 Still RX 60-20 Jungheinrich EKX 513 Toyota 7FBMF16 Toyota 7FBMF18 Toyota 8FBMKT20 Toyota FBM16 Crown TSP 6000-A Crown TSP 7000 Doosan BR13R-5 Mitsubishi FBP16 Yale MTC 13 and more... All common battery sizes available.

Condition: excellent (used), Included in delivery are: 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.010 mm depth of support: approx. 1.000 mm Itoloib H Hyjhccqtsf clear span: approx. 895 mm profile dim.: C: 75 x 45 x 18 mm Technical data of the deep bar: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) crossbar support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pc. ----- General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, SERRMAC ETD 22 DRILL PRESS - PGM Turntable + Clamp Precise, quiet and reliable Direct drive via INVERTER without pulley change Precision spindle axis with hardened morse taper Power supply 380V 3 Ground column. Standard configurations : - Digital display with spindle speed indication - Tapping with working depth adjustment - 24 V LED lighting system - Electronic membrane control panel - Spindle rotation reverse button Drilling on steel mm: Ø 22 Tapping: M16 Cone attachment: CM2 Ijljgyggzshccqtstf Column diameter mm: 98 Spindle stroke mm: 120 Transmission: Direct with Inverter No. speed: Variable No. rpm: 265-4200 Motor : kW 1.8-2.5 / 380V 3-phase. Power supply V 380V 3 Weight Kg 240 Column

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 48V 5PZS 625AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Itolhccjr Akzijqtef Test date 2024 Dimensions: 827 x 627 x 625 mm - DINA Weight: approx. 850 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Suitable for the following models and more: Linde E15 S- 355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16 - 386-02 - lateral change Linde E16 C - 1275-00 Linde E16 C - 335-00 Linde E16 L - 335-00 Linde E16 P - 1275-00 Linde E16 P - 386-00 Linde E16 P - 386-02 - lateral change Linde E18 - 335-00 Linde E18 - 386-00 Linde E18 - 386-02- lateral change Linde E18 C - 335-00 Linde E20 L - 386-00 Linde EG 16-1275-02 - lateral change Linde EG16 H -1275-02 - lateral change Linde EG16 P -1275-02 - lateral change Linde EG16 PH -1275-02 - lateral changeover Linde EG20 PH -1275-02 - lateral change Linde T30 R - 143-00 Still R20-15 Still R20-16 Still R20-18 Still RX20-15 Jungheinrich EFG Series Jungheinrich EFG 18 Jungheinrich EFG 216 Jungheinrich EFG 216 k Jungheinrich EFG 218 Jungheinrich EFG 218 k Jungheinrich EFG 316 Jungheinrich EFG 316 k Jungheinrich EFG 318 Jungheinrich EFG 318 k Jungheinrich EFG DF 16 Jungheinrich EFG DF V16 Toyota 7FBE15 Toyota 7FBEF15 Toyota 8FBEK16T Toyota 8FBEK18T Toyota /BT CB 1600 Crown SC1018 Crown SC3240 -1.8 Crown 5340 - 1 Caterpillar EP 16CPNT Caterpillar EP 16CPN Caterpillar EP 16C Caterpillar EP18CPNT Cesab Blitz 416 Clark GEX 18/20S Clark GTX18 Clark GTX20S Daewoo B16X-5 Hyster J1.8XNT Komatsu FB18M Mitsubishi FB16 Nichiyu FBT15P Nichiyu FBT15P-75 Nissan G1N1 TX16 OM-Pimespo-Fiat XE 18 Yale ERP 16VT and others All common battery sizes available

Condition: good (used), The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schäfer type: LF 511 G ZW design: recessed grip on one side Groove: f. partition walls color: red Material: polypropylene outer dimensions LxWxH: 500x156x143mm inner dimensions LxW: 448x123mm Useful height in stack: 127 mm Dimensions front wall opening: 85x60 mm (WxH) Capacity: 7.60 liters Stackable: yes Weight | pc: 0,790 kg Remark: These are used stacking boxes. There may be scratches, soiling and color defects may be present. Application: Itjlhccqon D Dxfotjf The open fronted storage boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, SERRMAC NEXT 25 PGM DRILL PRESS - DOUBLE SPEED THREE PHASE - NEW "CE" - ROTARY TABLE + VICE Drilling on steel: Ø 25 mm Tapping: M16 Column attachment: CM3 Column diameter: 98 mm Spindle stroke: 100 mm Transmission: pulleys (PU) No. of speeds: 12 Iolhjuif Sysccqtetf No. of revolutions: 164 - 2460 rpm Motor power: 0.75 kW Power supply: 380 V - 3 phases Weight: 185 kg

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1 year warranty 48V 5PZS 625AH - DIN B REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Test date 2024 Dimensions: 1,025 x 525 x 630 mm Weight: approx. 870 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Suitable for the following models and more: Still FM 20 Still R 20-15 Still RX 20-14 Still RX 20-15 Still RX 20-16 Iolhccqeulg T Estjtf Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Utilev UT20PFH and others, please inquire. All common battery sizes available

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 48V 6PZS 750AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Test date 2024 Dimensions: 827 x 735 x 625 mm Weight: approx. 1,034 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Linde E15S-355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16L - 386-02 - lateral change Linde E18 - 355-00 Islhccqort Itzototf Linde E18 - 386-02 - lateral change Linde E18C - 355-00 Linde E18 L - 386-00 Linde E18 L - 386-02 - lateral change Linde E20 L - 386-00 Linde E20 L - 386-00 - lateral change Linde E20 PL - 386-00 Linde E20 PL - 386-02 - lateral change Linde R14 X - 116-03 - front change Linde R14 X HIGH - 116-00 - frontal change Linde R16X - 116-00 Linde R16X - 116-00 - frontal change Linde R16X- 116-03 - frontal change Still R20-16 Still R20-18 Still RX 20-18PL Still RX 20-20 Jungheinrich EFG Series Jungheinrich EFG 216 Jungheinrich EFG 218 Jungheinrich EFG 220 Jungheinrich EFG 222 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFG DF 16L Jungheinrich EFG V 20 Jungheinrich EFG VAC 320 Toyota 7FBEF16 Toyota 7FBEF18 Toyota 7FBEF20 Toyota 8FBE16T Toyota 8FBE18T Toyota 8FBE20T Toyota 8FBEK18T Toyota 8FBMT18 Toyota 8FBMT20 Toyota/BT CBE 2.0 Crown SC 5360-2.0 Caterpillar EP 16/20 Caterpillar EP20PN Cesab B320A Hyster J1.6XNT Hyster J1.8XNT Hyster J2.0XN LOC E20 Mitsubishi FB16PNT Mitsubishi FB20PN Mitsubishi FB20PNT Capricorn Boss KE20 and more... All common battery sizes available.

Condition: as good as new (ex-display), Functionality: fully functional, Year of construction: 2024, Forklift battery with 1-year warranty 48V 4PZS 500AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Year of delivery 2024 (battery is approx. 1-2 years old) Dimensions: 827 x 519 x 625 mm Iolhccerqwpdeqtstf Weight: approx. 730 kg Capacity: 90% (C5 protocol is enclosed with delivery) Suitable for the following industrial trucks and others: Linde E 12 - 386-00 Linde E 14 - 335-00 Linde E 14 - 386-00 Linde E 14 - 386-02 - lateral change Linde E 15 S - 335-00 Linde E 16 - 386-00 Linde E 16 C - 386-00 Linde E 16 C - 386-02 - lateral change Linde E 16 L - 335-00 Linde E 18 - 386-02 - lateral change Linde E 18 C - 335-00 Linde E 20 L - 386-00 Linde T 30 R - 143-00 Still FU-X 20 Still R 20-14 Jungheinrich EFG series Jungheinrich EFG 110 K Jungheinrich EFG 213 Jungheinrich EFG 215 Jungheinrich EFG 216 K Jungheinrich EFG 312 Jungheinrich EFG DF 16 Jungheinrich EFG W 1 Jungheinrich EKE 20 Toyota 7FBEST10 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota/BT C3E120 Toyota/BT CBE 1.2 Toyota/BT CBE 1.5 Toyota/BT SSE 135 Crown 3 Crown RT 3000 Crown SC 1016 Crown SC 1018 Crown SC 3210 Crown S6 5320 - 1 Crown SCT 6020 Balkancar EV698 Caterpillar EP13PNT Caterpillar EP15PNT Cesab 5 Cesab B315 Cesab B315A Cesab CBE1 Clark GEX16 Clark SC5310-1.3 Clark TM 16N Hyster J1.5XNT SW Komatsu FB15M Mitsubishi FB13PNT Mitsubishi FB15PN Mitsubishi FB15PNT OM-Pimespo-Fiat XE 15 OM-Pimespo-Fiat XE 18 Yale ERP 15 VT Yale ERP 16 VT

Condition: good (used), Surface Grinding Machine BLANCHARD No 18 Shelf diameter: Ø 925 mm Shelf speed: 5 / 7,5 / 10 / 15 / 21 / 27 RPM Ijlhccqsvxql Njtetf Grindstone speed rotation: 750 RPM Max height pieces: 300 mm Grinding wheel dimensions:Ø 500 x 125 x 406 mm Maxi loading capacity: 1300 kg Motor power: 25 CV Voltage: 380 V Dimensions (L x W x H): 3200 x 1800 x 2400 mm Weight: approx 5,3 T

Condition: used, Functionality: fully functional, turning height: 4,400 mm, workpiece weight (max.): 1,00,000 kg, turning diameter: 6,000 mm, feed length Z-axis: 1,500 mm, rotary table diameter: 5,500 mm, Asturfeito is selling the SCHIESS 18’ VBM vertical lathe, a robust machine with the oversized dimensions characteristic of its time. Made in Germany and retrofitted in 2015, it is ideal for machining large and heavy parts. This machine is suitable for various sectors, including the metallurgical industry, general machining workshops, manufacturing of mechanical components, construction of heavy structures, and power generation. • Manufacturer: SCHIESS • Model: 18’ VBM • Platen Ø: 5500 mm • Maximum Turnable Ø: 6000 mm (width between columns) Islhccovvkw Toqtetf • Maximum Piece Height: 4400 mm • Moving Crossbar: 3000 mm travel • RAM (Z axis): 1500 mm travel • Maximum Weight on Platen: 100 tons • Rotation Speeds: - Range I: 1-8 rpm - Range II: 5-25 rpm • Numerical Control: FAGOR 8055 • Machine Status: operational and disassembled

Condition: used, Year of construction: 2022, operating hours: 54 h, power: 2 kW (2.72 HP), carrying capacity of cage: 200 kg, mast type: telescope, construction height: 1,970 mm, wheelbase: 1,900 mm, ground clearance: 152 mm, total length: 4,170 mm, front tire size: 22x9, rear tire size: 22x9, drive type: Elektro, arm reach: 5,570 mm, construction width: 1,500 mm, net weight: 3,675 kg, working height: 12,000 mm, front tire type: Genie, rear tire type: Genie, - Arbeitshöhe max. 12m - Plattformhöhe max. 10m - Seitliche Reichweite max. 5,57m - Übergreifende Höhe max. 4,28m - Tragfähigkeit 200 kg - Oberwagen-Schwenkbereich 400° - Seitlicher Überhang 0 cm - Fahrgeschwindigkeit – eingefahren 5,2 km/h - Steigfähigkeit – eingefahren 30% - Neigungssensor-Aktivierung (Längsachse/Querachse) 2,5°- 4,5° / 4,5° - Wenderadius – innen/außen 1,9m - Antriebsart 48V DC (8 × 6V 350Ah) - Fahrantriebssystem 48V 3-Phase AC - Notbedienung 24V DC - Hydrauliktankinhalt 20,8 L - Reifenkontaktdruck 483 kPa - Bodenlast (Reifen) 9,72 kPa - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibrationen 2,5m/s2 - Standard-Blei-Säure-Batterie Ijlhcjvkh Dtocqtetf - Tiefenentladungsschutz (LVI) mit Batterieladungsanzeige (BCI) - Stromkabel zur Plattform - Fahrantrieb-Aktivierungssystem - Hupe - LCD-Bedienpult - Lift Guard Kontaktalarm - Plattform-Lasterfassungssystem - Proportionalsteuerung - Selbstnivellierende Plattform - Fahralarmpaket: Blitzwarnleuchten, Absenk-, Fahr- und Neigungsalarm - Lift Connect Telematik - Vollgummireifen, nichtmarkierend - Neigungsabschaltung der Fahrantriebfunktion - Vorrichtung zum elektrischen Lösen der Bremsen - Betriebsstundenzähler - Integriertes Diagnosesystem - Zwei gekapselte AC-Fahrmotoren an den Vorderrädern

Condition: excellent (used), TVT Termoventiltecnica 30kw extraction system Power 30kw Controlled by an inverter Ielhev Tbc Isccqtetf

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 800 mm, ZEISS CNC coordinate measuring machine ACCURA II Measuring range: X = 900 mm, Y = 1800 mm, Z = 800 mm Year of manufacture: 2011 Last calibration: 04/2021 Technically and optically in excellent condition Length measurement error according to ISO 10360-2 for VAST XT Gold/VAST Gold/VAST XTR Gold: E0 = (1.9 + L/300) µm, PFTU = 1.9 µm Permissible reference temperature (held constant for 48 hours) selectable from 20-26°C, +-2 K Scanning performance according to ISO 10360-4 MPE_THP = 3.5 µm in 68 s Device features, equipment: Gantry measuring machine with fixed table Glass-ceramic scales C99 control system with BP26_SE control panel Sensor technology VAST XT Multi-Sensor Rack MSR 12-way Automatic temperature compensation Calibration sphere Reference probe HP workstation with monitor Software: Calypso Basic Islhccqsr H Hbtjtetf Options: Calypso QDAS Converter Calypso upgrade and additional options available Exchange plate Various probe accessories Additional accessories and options available Further upgrades possible Available immediately